The 2ϕ-Josephson junctions (JJs), characterized by a dominant second harmonic in the current-phase relationship (CPR), are promising devices for low-power, high-density superconducting digital logic. These junctions eliminate the need for on-chip inductors to store magnetic flux and they reduce bias current requirements. In practical implementations, both first and second harmonic components are typically present in the CPR, affecting the junction dynamics and circuit operation. Understanding this behavior is essential for the reliable design of superconducting logic circuits utilizing these junctions, such as half flux quantum (HFQ) circuits. In this article, a compact Verilog-A model for 2ϕ-JJs is presented that captures the nonlinear behavior of the junctions, accounting for both harmonic contributions and their impact on damping. Two parameter sets are derived from experimental data corresponding to junctions with weak ferromagnetic barriers and ferromagnetic insulator barriers. Based on the inferred parameters, models of each junction type are developed. The model is validated against published experimental results and simulated within a D flip flop cell, demonstrating its use for superconducting circuit design and analysis, including evaluation of circuit behavior under nonideal junction conditions. Stability issues and failure mechanisms introduced by a nonzero first harmonic are analyzed, and underlying junction dynamics are examined to explain the reduction in circuit parameter margins.
The 2ϕ-Josephson junctions (JJs), characterized by a dominant second harmonic in the current-phase relationship (CPR), are promising devices for low-power, high-density superconducting digital logic. These junctions eliminate the need for on-chip inductors to store magnetic flux and they reduce bias current requirements. In practical implementations, both first and second harmonic components are typically present in the CPR, affecting the junction dynamics and circuit operation. Understanding this behavior is essential for the reliable design of superconducting logic circuits utilizing these junctions, such as half flux quantum (HFQ) circuits. In this article, a compact Verilog-A model for 2ϕ-JJs is presented that captures the nonlinear behavior of the junctions, accounting for both harmonic contributions and their impact on damping. Two parameter sets are derived from experimental data corresponding to junctions with weak ferromagnetic barriers and ferromagnetic insulator barriers. Based on the inferred parameters, models of each junction type are developed. The model is validated against published experimental results and simulated within a D flip flop cell, demonstrating its use for superconducting circuit design and analysis, including evaluation of circuit behavior under nonideal junction conditions. Stability issues and failure mechanisms introduced by a nonzero first harmonic are analyzed, and underlying junction dynamics are examined to explain the reduction in circuit parameter margins.
With operating frequencies reaching hundreds of gigahertz and switching energies in the attojoule range, superconducting electronics has become one of the leading candidates among beyond CMOS technologies. The practical implementation of large scale superconducting digital systems is constrained by multiple challenges, including limited power delivery efficiency, restricted scalability and integration density, and the absence of mature electronic design automation tools for large scale circuit design. In this dissertation, modeling, analysis, and design methodologies are presented that address the scalability and integration density challenges of superconducting digital technologies. A methodology for thermal analysis is introduced to describe heat generation and propagation in rapid single flux quantum (RSFQ) circuits. The modeling approach provides temperature estimates that agree with numerical simulations while maintaining low computational cost, enabling temperature-aware design of RSFQ circuit structures and large scale layouts. By quantifying thermal effects on chip, this method supports reliable operation of digital circuits and guides the scaling of integration density in superconducting systems. To further improve scalability of superconducting digital circuits, the use of Josephson junctions with ferromagnetic barriers is investigated. Replacing the insulating barrier with a ferromagnetic layer modifies the current–phase relationship, enabling π-, 2ϕ-, and ϕ-junction operation. These junctions allow inductorless flux quantum storage, intrinsic bias, and phase logic, offering new approaches for area efficient and energy efficient computing with superconducting devices. An inductorless dynamic logic family based on bistable 2ϕ-junctions is proposed, exhibiting improved scalability compared with conventional RSFQ circuits. To enable accurate circuit analysis, a compact Verilog-A model of 2ϕ-junctions is developed. The model reproduces experimentally observed behavior of junctions with weak ferromagnetic and ferromagnetic insulator barriers, and simulations reveal the influence of harmonic components on switching dynamics, margins, and circuit robustness. A variation-aware design methodology is introduced for circuits employing superconductor-erromagnet-superconductor π-junctions. Sensitivities of the critical current density to process and temperature variations are quantified and margins are established for reliable circuit operation. It is shown that magnetic scattering, in particular spin-flip scattering, is the dominant source of parameter sensitivity in junctions with weak ferromagnetic barriers. Material and fabrication choices that enable better control of this parameter are therefore critical for improving reproducibility and reliable device performance. Together, the modeling and design methodologies developed in this dissertation contribute to improving the scalability and reliability of superconducting digital systems, supporting the advancement of high speed, energy efficient computing technologies.
We adopt superconductor/ferromagnet/insulator/superconductor (SFIS) Josephson junctions (JJs) as both switching JJs and intrinsic π phase shifters in superconductor digital circuits. The critical current density (Jc) and characteristic voltage (Vc) of the SFIS junctions are about 22 A/cm2 and 22 μV, respectively. The intrinsic π phase shift is confirmed by measuring the suppressed nominal critical current Icn and half-period-shifted modulation pattern of a π–π–π superconducting quantum interference device (SQUID) that contains three π-JJs in a superconducting loop. A single-flux-quantum (SFQ) circuit composed of a DC/SFQ, Josephson transmission line (JTL), and SFQ/DC converter based on SFIS JJs alone is demonstrated at 4.2 K. The energy dissipation of the SFQ/DC converter decreases by 80% because some JJs are self-biased by the π phase shifter. The intrinsic circulating currents induced by the π phase shifters lead to a narrow bias margin (±5%) and even error function, which can be solved by parameters optimization or circuit initialization in the future. The half-modulation period (Φ0/2) of a half-flux-quantum (HFQ) SQUID (a partial HFQ JTL) exhibits propagation of HFQ between π–π–π SQUIDs, indicating that more complex HFQ circuits can be developed with π-JJs alone in the future.
Josephson junction, as the core nonlinear element underpinning superconducting electronics, is characterized by its current-phase relation (CPR), which fundamentally determines the dynamical properties and functional capabilities of superconducting quantum devices. Traditional Josephson junctions typically exhibit a traditional sinusoidal CPR; however, the junctions characterized by non-sinusoidal CPR have recently attracted considerable attention due to their distinctive physical properties and promising quantum device applications. In this work, a numerical model tailored specifically for junctions exhibiting non-sinusoidal CPR is developed by integrating experimentally measured current-voltage (I-V ) characteristics from Nb/Al-AlOx/Nb junctions into a resistively and capacitively shunted junction (RCSJ) framework. By leveraging this refined model, the influence of CPR skewness on Josephson junction dynamics is systematically investigated. Our results indicate that in underdamped junctions, the critical current significantly diminishes with the increase of CPR skewness, a behavior reminiscent of the adjustable critical currents typically observed in DC superconducting quantum interference devices (SQUIDs). Conversely, in overdamped junctions, the influence of CPR skewness on the I-V characteristics is found to be negligible. However, our numerical simulations under microwave irradiation indicate that nonsinusoidal CPRs readily promote the emergence of half-integer Shapiro steps in overdamped junctions, thereby establishing CPR skewness as a plausible microscopic origin for this phenomenon. In addition, the advanced design system (ADS) simulations is employed to model nonlinear resonators and DC SQUID circuits, offering a detailed investigation into how nonsinusoidal CPRs modulate the Josephson inductance and magnetic flux response. Our findings reveal that engineering the CPR of Josephson junctions provides substantial flexibility in the design of superconducting qubits, parametric amplifiers, and non-magnetic nonreciprocal devices. This tunability underscores significant opportunities for developing next-generation superconducting electronic components. The Josephson junctions with engineered CPR offer expanded functionality for superconducting quantum technologies. This study suggests that customized CPR can enhance control over the dynamical behavior of junctions, and promote the optimized designs of superconducting qubits, parametric amplifiers, and nonmagnetic nonreciprocal devices.
The all-JJ logic family is a promising area and power efficient, scalable single flux quantum (SFQ) technology for application to exascale supercomputers. All-JJ superconductive logic is based on a superconductor-ferromagnet-superconductor (SFS) bistable JJ, enabling nanometer feature sizes in VLSI complexity superconductive systems. In this paper, a mechanical analogy is proposed to describe the dynamic behavior of these bistable JJs. Novel all-JJ logic gates, such as TFF, DFF, OR, AND, and NOT gates, are presented here. All-JJ circuits are composed of bistable JJs, standard JJs, and bias currents, not requiring large inductors within the storage loops. All-JJ logic cells exhibit less delay and power than standard SFQ cells with the same critical current density. All-JJ systems can operate at high frequencies due to the small capacitance of the SFS JJ. A complex all-JJ circuit from the suite of ISCAS'85 benchmark circuits is also characterized. This complex all-JJ circuit exhibits less delay and power as compared to standard SFQ logic. The bias current in a conventional benchmark circuit and all-JJ benchmark circuit is, respectively, 22 mA and 13 mA. The delay of each cell within the conventional benchmark circuit and all-JJ benchmark circuit is, respectively, approximately 20 and 8 ps. A parasitic inductance in series with the JJs disturbs the current distribution within the all-JJ circuits while degrading the margins. To suppress the effects of this parasitic inductance on SFS JJs, small linear inductors are added to manage the current distribution and improve the parameter margins.
A bistable superconducting quantum interference device (SQUID) exclusively comprising Josephson junctions (JJs) is proposed. The design integrates two 2Φ-JJs within the loop structure, while the state of the SQUID is monitored through a conventional 2π-periodic JJ (0-JJ). This configuration eliminates the need for geometric inductors, leveraging the nonlinear phase dynamics for bistability. Extensive simulations confirm robust bistable operation under controlled external flux bias, positioning the proposed SQUID as an area-efficient building block for superconducting memory cells, sensors for various applications, and SFQ-compatible logic elements.
Design Guidelines for Superconducting Digital Circuits Employing π-JJs With Ferromagnetic Barriers
π-Josephson junctions based on ferromagnetic barriers enable energy- and area-efficient superconducting digital circuits. The critical current densityJcof superconductor–ferromagnet–superconductor (SFS) junctions is highly sensitive to barrier thickness, magnetic scattering, and temperature, making reliableπstate operation dependent on fabrication and thermal variations. In this article, the sensitivity ofJcto temperature and fabrication process parameters is quantified for SFS junctions with weak ferromagnetic barriers. A methodology is developed to determine allowable parameter margins for junctions used as phase shifters or active switching elements. An algorithm is introduced to generate design guidelines in terms of acceptable ranges of thickness and spin-flip scattering for a targetJc. Nominal barrier thickness regions are identified in which strong sensitivity to variation and second harmonic contribution in the current–phase relationship can compromise stable circuit operation. These results provide practical guidelines for robustπ-junction operation in superconducting digital circuits.