Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Design Guidelines for Superconducting Digital Circuits Employing $\pi$-JJs With Ferromagnetic Barriers

Ana Mitrović, Mark F. Bocko

Published Aug 6, 2026• 0 citations
Publisher

Abstract

$\pi$-Josephson junctions based on ferromagnetic barriers enable energy- and area-efficient superconducting digital circuits. The critical current density$J_{c}$of superconductor–ferromagnet–superconductor (SFS) junctions is highly sensitive to barrier thickness, magnetic scattering, and temperature, making reliable$\pi$state operation dependent on fabrication and thermal variations. In this article, the sensitivity of$J_{c}$to temperature and fabrication process parameters is quantified for SFS junctions with weak ferromagnetic barriers. A methodology is developed to determine allowable parameter margins for junctions used as phase shifters or active switching elements. An algorithm is introduced to generate design guidelines in terms of acceptable ranges of thickness and spin-flip scattering for a target$J_{c}$. Nominal barrier thickness regions are identified in which strong sensitivity to variation and second harmonic contribution in the current–phase relationship can compromise stable circuit operation. These results provide practical guidelines for robust$\pi$-junction operation in superconducting digital circuits.

DOI
10.1109/tasc.2026.3721764

Related papers

Design methodologies for high density superconducting circuits and systems

Ana Mitrović, Mark F. Bocko

With operating frequencies reaching hundreds of gigahertz and switching energies in the attojoule range, superconducting electronics has become one of the leading candidates among beyond CMOS technologies. The practical implementation of large scale superconducting digital systems is constrained by multiple challenges, including limited power delivery efficiency, restricted scalability and integration density, and the absence of mature electronic design automation tools for large scale circuit design. In this dissertation, modeling, analysis, and design methodologies are presented that address the scalability and integration density challenges of superconducting digital technologies. A methodology for thermal analysis is introduced to describe heat generation and propagation in rapid single flux quantum (RSFQ) circuits. The modeling approach provides temperature estimates that agree with numerical simulations while maintaining low computational cost, enabling temperature-aware design of RSFQ circuit structures and large scale layouts. By quantifying thermal effects on chip, this method supports reliable operation of digital circuits and guides the scaling of integration density in superconducting systems. To further improve scalability of superconducting digital circuits, the use of Josephson junctions with ferromagnetic barriers is investigated. Replacing the insulating barrier with a ferromagnetic layer modifies the current–phase relationship, enabling π-, 2ϕ-, and ϕ-junction operation. These junctions allow inductorless flux quantum storage, intrinsic bias, and phase logic, offering new approaches for area efficient and energy efficient computing with superconducting devices. An inductorless dynamic logic family based on bistable 2ϕ-junctions is proposed, exhibiting improved scalability compared with conventional RSFQ circuits. To enable accurate circuit analysis, a compact Verilog-A model of 2ϕ-junctions is developed. The model reproduces experimentally observed behavior of junctions with weak ferromagnetic and ferromagnetic insulator barriers, and simulations reveal the influence of harmonic components on switching dynamics, margins, and circuit robustness. A variation-aware design methodology is introduced for circuits employing superconductor-erromagnet-superconductor π-junctions. Sensitivities of the critical current density to process and temperature variations are quantified and margins are established for reliable circuit operation. It is shown that magnetic scattering, in particular spin-flip scattering, is the dominant source of parameter sensitivity in junctions with weak ferromagnetic barriers. Material and fabrication choices that enable better control of this parameter are therefore critical for improving reproducibility and reliable device performance. Together, the modeling and design methodologies developed in this dissertation contribute to improving the scalability and reliability of superconducting digital systems, supporting the advancement of high speed, energy efficient computing technologies.

•Jan 1, 2025•0 citations

Electrodynamics of Highly Spin-Polarized Tunnel Josephson Junctions

H.G. Ahmad, R. Caruso, A. Pal +5 more

The continuous development of superconducting electronics is encouraging several studies on hybrid Josephson junctions (JJs) based on superconductor-ferromagnet-superconductor (SFS) heterostructures, as either spintronic devices or switchable elements in quantum and classical circuits. Recent experimental evidence of macroscopic quantum tunneling and of an incomplete 0-$\ensuremath{\pi}$ transition in tunnel-ferromagnetic spin-filter JJs could also enhance the capabilities of SFS JJs as active elements. Here, we provide a self-consistent electrodynamic characterization of $\mathrm{Nb}\mathrm{N}$/$\mathrm{Gd}\mathrm{N}$/$\mathrm{Nb}\mathrm{N}$ spin-filter JJs as a function of the barrier thickness, disentangling the high-frequency dissipation effects due to the environment from the intrinsic low-frequency dissipation processes. The fitting of the $I$-$V$ characteristics at 4.2 K and at 300 mK by using the tunnel-junction-microscopic model allows us to determine the subgap resistance ${R}_{\mathrm{sg}}$, the quality factor $Q$, and the junction capacitance $C$. These results provide the scaling behavior of the electrodynamic parameters as a function of the barrier thickness, which represents a fundamental step for the feasibility of tunnel-ferromagnetic JJs as active elements in quantum and classical circuits, and are of general interest for tunnel junctions other than conventional SIS JJs.

arXiv:2001.06046•Physical Review Applied•Jan 10, 2020•37 citations

Compact Model and Circuit Behavior of Bistable 2ϕ-Josephson Junctions

Ana Mitrović, Mark F. Bocko

The 2ϕ-Josephson junctions (JJs), characterized by a dominant second harmonic in the current-phase relationship (CPR), are promising devices for low-power, high-density superconducting digital logic. These junctions eliminate the need for on-chip inductors to store magnetic flux and they reduce bias current requirements. In practical implementations, both first and second harmonic components are typically present in the CPR, affecting the junction dynamics and circuit operation. Understanding this behavior is essential for the reliable design of superconducting logic circuits utilizing these junctions, such as half flux quantum (HFQ) circuits. In this article, a compact Verilog-A model for 2ϕ-JJs is presented that captures the nonlinear behavior of the junctions, accounting for both harmonic contributions and their impact on damping. Two parameter sets are derived from experimental data corresponding to junctions with weak ferromagnetic barriers and ferromagnetic insulator barriers. Based on the inferred parameters, models of each junction type are developed. The model is validated against published experimental results and simulated within a D flip flop cell, demonstrating its use for superconducting circuit design and analysis, including evaluation of circuit behavior under nonideal junction conditions. Stability issues and failure mechanisms introduced by a nonzero first harmonic are analyzed, and underlying junction dynamics are examined to explain the reduction in circuit parameter margins.

IEEE Transactions on Electron Devices•Nov 10, 2025•1 citation

Superconductor digital circuits with π junctions alone

Feng Li, Yuto Takeshita, Masamitsu Tanaka +1 more

We adopt superconductor/ferromagnet/insulator/superconductor (SFIS) Josephson junctions (JJs) as both switching JJs and intrinsic π phase shifters in superconductor digital circuits. The critical current density (Jc) and characteristic voltage (Vc) of the SFIS junctions are about 22 A/cm2 and 22 μV, respectively. The intrinsic π phase shift is confirmed by measuring the suppressed nominal critical current Icn and half-period-shifted modulation pattern of a π–π–π superconducting quantum interference device (SQUID) that contains three π-JJs in a superconducting loop. A single-flux-quantum (SFQ) circuit composed of a DC/SFQ, Josephson transmission line (JTL), and SFQ/DC converter based on SFIS JJs alone is demonstrated at 4.2 K. The energy dissipation of the SFQ/DC converter decreases by 80% because some JJs are self-biased by the π phase shifter. The intrinsic circulating currents induced by the π phase shifters lead to a narrow bias margin (±5%) and even error function, which can be solved by parameters optimization or circuit initialization in the future. The half-modulation period (Φ0/2) of a half-flux-quantum (HFQ) SQUID (a partial HFQ JTL) exhibits propagation of HFQ between π–π–π SQUIDs, indicating that more complex HFQ circuits can be developed with π-JJs alone in the future.

Applied Physics Letters•Apr 17, 2023•11 citations

Magnetic Josephson Junctions With Superconducting Interlayer for Cryogenic Memory

I. V. Vernik, V. V. Bol'ginov, Sergey V. Bakurskiy +4 more

We investigate a Magnetic Josephson Junction (MJJ) - a superconducting device with ferromagnetic barrier for a scalable high-density cryogenic memory compatible with energy-efficient single flux quantum (SFQ) circuits. The superconductor-insulator-superconductor-ferromagnet-superconductor (SIS'FS) MJJs are analyzed both experimentally and theoretically. We found that the properties of SIS'FS junctions fall into two distinct classes based on the thickness of S'layer. We fabricate Nb-Al/AlOx-Nb-PdFe-Nb SIS'FS MJJs using a co-processing approach with a combination of HYPRES and ISSP fabrication processes. The resultant SIS'FS structure with thin superconducting S'-layer is substantially affected by the ferromagnetic layer as a whole. We fabricate these type of junctions to reach the device compatibility with conventional SIS junctions used for superconducting SFQ electronics to ensure a seamless integration of MJJ-based circuits and SIS JJ-based ultra-fast digital SFQ circuits. We report experimental results for MJJs, demonstrating their applicability for superconducting memory and digital circuits. These MJJs exhibitIcRnproduct only ~ 30% lower than that of conventional SIS junctions co-produced in the same fabrication. Analytical calculations for these SIS'FS structures are in a good agreement with the experiment. We discuss application of MJJ devices for memory and programmable logic circuits.

arXiv:1212.0815•IEEE Transactions on Applied Superconductivity•Dec 10, 2012•149 citations

Magnetic Josephson Junction Technology for Digital and Memory Applications

V. V. Ryazanov, V. V. Bol’ginov, Danila S. Sobanin +4 more

The lack of dense, fast, energy efficient memory has been the main detractor for multiple superconducting digital projects in the past. Recently, fundamental physics research in superconductor-ferromagnet thin-film tunnel structures created a new opportunity to solve this long-standing problem. Superconductivity and ferromagnetism, two deeply antagonistic electronic properties, can co-exist in form of Magnetic Josephson Junctions (MJJs). The superconducting-ferromagnetic MJJs are electrically compatible with traditional superconductor-insulator-superconductor (SIS) Josephson junctions (JJs) used for digital energy-efficient single flux quantum (eSFQ/ERSFQ) circuits. Both MJJ and JJ circuits have similar fabrication process and can be integrated on a single chip. As a result, a combination of MJJs and JJs can be used to form addressable memory cells, energy-efficient memory periphery circuits and programmable logic elements. In this paper, we present the test results of superconductor-insulator-ferromagnet-superconductor (SIFS) MJJs showing their applicability for superconducting spintronic memory and digital circuits.

Physics Procedia•Jan 1, 2012•121 citations
Design Guidelines for Superconducting Digital Circuits Employing π\piπ-JJs With Ferromagnetic Barriers
π\piπ-Josephson junctions based on ferromagnetic barriers enable energy- and area-efficient superconducting digital circuits. The critical current densityJcJ_{c}Jc​of superconductor–ferromagnet–superconductor (SFS) junctions is highly sensitive to barrier thickness, magnetic scattering, and temperature, making reliableπ\piπstate operation dependent on fabrication and thermal variations. In this article, the sensitivity ofJcJ_{c}Jc​to temperature and fabrication process parameters is quantified for SFS junctions with weak ferromagnetic barriers. A methodology is developed to determine allowable parameter margins for junctions used as phase shifters or active switching elements. An algorithm is introduced to generate design guidelines in terms of acceptable ranges of thickness and spin-flip scattering for a targetJcJ_{c}Jc​. Nominal barrier thickness regions are identified in which strong sensitivity to variation and second harmonic contribution in the current–phase relationship can compromise stable circuit operation. These results provide practical guidelines for robustπ\piπ-junction operation in superconducting digital circuits.
With operating frequencies reaching hundreds of gigahertz and switching energies in the attojoule range, superconducting electronics has become one of the leading candidates among beyond CMOS technologies. The practical implementation of large scale superconducting digital systems is constrained by multiple challenges, including limited power delivery efficiency, restricted scalability and integration density, and the absence of mature electronic design automation tools for large scale circuit design. In this dissertation, modeling, analysis, and design methodologies are presented that address the scalability and integration density challenges of superconducting digital technologies. A methodology for thermal analysis is introduced to describe heat generation and propagation in rapid single flux quantum (RSFQ) circuits. The modeling approach provides temperature estimates that agree with numerical simulations while maintaining low computational cost, enabling temperature-aware design of RSFQ circuit structures and large scale layouts. By quantifying thermal effects on chip, this method supports reliable operation of digital circuits and guides the scaling of integration density in superconducting systems. To further improve scalability of superconducting digital circuits, the use of Josephson junctions with ferromagnetic barriers is investigated. Replacing the insulating barrier with a ferromagnetic layer modifies the current–phase relationship, enabling π-, 2ϕ-, and ϕ-junction operation. These junctions allow inductorless flux quantum storage, intrinsic bias, and phase logic, offering new approaches for area efficient and energy efficient computing with superconducting devices. An inductorless dynamic logic family based on bistable 2ϕ-junctions is proposed, exhibiting improved scalability compared with conventional RSFQ circuits. To enable accurate circuit analysis, a compact Verilog-A model of 2ϕ-junctions is developed. The model reproduces experimentally observed behavior of junctions with weak ferromagnetic and ferromagnetic insulator barriers, and simulations reveal the influence of harmonic components on switching dynamics, margins, and circuit robustness. A variation-aware design methodology is introduced for circuits employing superconductor-erromagnet-superconductor π-junctions. Sensitivities of the critical current density to process and temperature variations are quantified and margins are established for reliable circuit operation. It is shown that magnetic scattering, in particular spin-flip scattering, is the dominant source of parameter sensitivity in junctions with weak ferromagnetic barriers. Material and fabrication choices that enable better control of this parameter are therefore critical for improving reproducibility and reliable device performance. Together, the modeling and design methodologies developed in this dissertation contribute to improving the scalability and reliability of superconducting digital systems, supporting the advancement of high speed, energy efficient computing technologies.
The continuous development of superconducting electronics is encouraging several studies on hybrid Josephson junctions (JJs) based on superconductor-ferromagnet-superconductor (SFS) heterostructures, as either spintronic devices or switchable elements in quantum and classical circuits. Recent experimental evidence of macroscopic quantum tunneling and of an incomplete 0-$\ensuremath{\pi}$ transition in tunnel-ferromagnetic spin-filter JJs could also enhance the capabilities of SFS JJs as active elements. Here, we provide a self-consistent electrodynamic characterization of NbN\mathrm{Nb}\mathrm{N}NbN/GdN\mathrm{Gd}\mathrm{N}GdN/NbN\mathrm{Nb}\mathrm{N}NbN spin-filter JJs as a function of the barrier thickness, disentangling the high-frequency dissipation effects due to the environment from the intrinsic low-frequency dissipation processes. The fitting of the III-VVV characteristics at 4.2 K and at 300 mK by using the tunnel-junction-microscopic model allows us to determine the subgap resistance Rsg{R}_{\mathrm{sg}}Rsg​, the quality factor QQQ, and the junction capacitance CCC. These results provide the scaling behavior of the electrodynamic parameters as a function of the barrier thickness, which represents a fundamental step for the feasibility of tunnel-ferromagnetic JJs as active elements in quantum and classical circuits, and are of general interest for tunnel junctions other than conventional SIS JJs.
The 2ϕ-Josephson junctions (JJs), characterized by a dominant second harmonic in the current-phase relationship (CPR), are promising devices for low-power, high-density superconducting digital logic. These junctions eliminate the need for on-chip inductors to store magnetic flux and they reduce bias current requirements. In practical implementations, both first and second harmonic components are typically present in the CPR, affecting the junction dynamics and circuit operation. Understanding this behavior is essential for the reliable design of superconducting logic circuits utilizing these junctions, such as half flux quantum (HFQ) circuits. In this article, a compact Verilog-A model for 2ϕ-JJs is presented that captures the nonlinear behavior of the junctions, accounting for both harmonic contributions and their impact on damping. Two parameter sets are derived from experimental data corresponding to junctions with weak ferromagnetic barriers and ferromagnetic insulator barriers. Based on the inferred parameters, models of each junction type are developed. The model is validated against published experimental results and simulated within a D flip flop cell, demonstrating its use for superconducting circuit design and analysis, including evaluation of circuit behavior under nonideal junction conditions. Stability issues and failure mechanisms introduced by a nonzero first harmonic are analyzed, and underlying junction dynamics are examined to explain the reduction in circuit parameter margins.
We adopt superconductor/ferromagnet/insulator/superconductor (SFIS) Josephson junctions (JJs) as both switching JJs and intrinsic π phase shifters in superconductor digital circuits. The critical current density (Jc) and characteristic voltage (Vc) of the SFIS junctions are about 22 A/cm2 and 22 μV, respectively. The intrinsic π phase shift is confirmed by measuring the suppressed nominal critical current Icn and half-period-shifted modulation pattern of a π–π–π superconducting quantum interference device (SQUID) that contains three π-JJs in a superconducting loop. A single-flux-quantum (SFQ) circuit composed of a DC/SFQ, Josephson transmission line (JTL), and SFQ/DC converter based on SFIS JJs alone is demonstrated at 4.2 K. The energy dissipation of the SFQ/DC converter decreases by 80% because some JJs are self-biased by the π phase shifter. The intrinsic circulating currents induced by the π phase shifters lead to a narrow bias margin (±5%) and even error function, which can be solved by parameters optimization or circuit initialization in the future. The half-modulation period (Φ0/2) of a half-flux-quantum (HFQ) SQUID (a partial HFQ JTL) exhibits propagation of HFQ between π–π–π SQUIDs, indicating that more complex HFQ circuits can be developed with π-JJs alone in the future.
We investigate a Magnetic Josephson Junction (MJJ) - a superconducting device with ferromagnetic barrier for a scalable high-density cryogenic memory compatible with energy-efficient single flux quantum (SFQ) circuits. The superconductor-insulator-superconductor-ferromagnet-superconductor (SIS'FS) MJJs are analyzed both experimentally and theoretically. We found that the properties of SIS'FS junctions fall into two distinct classes based on the thickness of S'layer. We fabricate Nb-Al/AlOx-Nb-PdFe-Nb SIS'FS MJJs using a co-processing approach with a combination of HYPRES and ISSP fabrication processes. The resultant SIS'FS structure with thin superconducting S'-layer is substantially affected by the ferromagnetic layer as a whole. We fabricate these type of junctions to reach the device compatibility with conventional SIS junctions used for superconducting SFQ electronics to ensure a seamless integration of MJJ-based circuits and SIS JJ-based ultra-fast digital SFQ circuits. We report experimental results for MJJs, demonstrating their applicability for superconducting memory and digital circuits. These MJJs exhibitIcRnproduct only ~ 30% lower than that of conventional SIS junctions co-produced in the same fabrication. Analytical calculations for these SIS'FS structures are in a good agreement with the experiment. We discuss application of MJJ devices for memory and programmable logic circuits.
The lack of dense, fast, energy efficient memory has been the main detractor for multiple superconducting digital projects in the past. Recently, fundamental physics research in superconductor-ferromagnet thin-film tunnel structures created a new opportunity to solve this long-standing problem. Superconductivity and ferromagnetism, two deeply antagonistic electronic properties, can co-exist in form of Magnetic Josephson Junctions (MJJs). The superconducting-ferromagnetic MJJs are electrically compatible with traditional superconductor-insulator-superconductor (SIS) Josephson junctions (JJs) used for digital energy-efficient single flux quantum (eSFQ/ERSFQ) circuits. Both MJJ and JJ circuits have similar fabrication process and can be integrated on a single chip. As a result, a combination of MJJs and JJs can be used to form addressable memory cells, energy-efficient memory periphery circuits and programmable logic elements. In this paper, we present the test results of superconductor-insulator-ferromagnet-superconductor (SIFS) MJJs showing their applicability for superconducting spintronic memory and digital circuits.