Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

All-JJ Logic Based on Bistable JJs

Tahereh Jabbari, Mark F. Bocko, Eby G. Friedman

Published Mar 23, 2023• 16 citations
Publisher

Abstract

The all-JJ logic family is a promising area and power efficient, scalable single flux quantum (SFQ) technology for application to exascale supercomputers. All-JJ superconductive logic is based on a superconductor-ferromagnet-superconductor (SFS) bistable JJ, enabling nanometer feature sizes in VLSI complexity superconductive systems. In this paper, a mechanical analogy is proposed to describe the dynamic behavior of these bistable JJs. Novel all-JJ logic gates, such as TFF, DFF, OR, AND, and NOT gates, are presented here. All-JJ circuits are composed of bistable JJs, standard JJs, and bias currents, not requiring large inductors within the storage loops. All-JJ logic cells exhibit less delay and power than standard SFQ cells with the same critical current density. All-JJ systems can operate at high frequencies due to the small capacitance of the SFS JJ. A complex all-JJ circuit from the suite of ISCAS'85 benchmark circuits is also characterized. This complex all-JJ circuit exhibits less delay and power as compared to standard SFQ logic. The bias current in a conventional benchmark circuit and all-JJ benchmark circuit is, respectively, 22 mA and 13 mA. The delay of each cell within the conventional benchmark circuit and all-JJ benchmark circuit is, respectively, approximately 20 and 8 ps. A parasitic inductance in series with the JJs disturbs the current distribution within the all-JJ circuits while degrading the margins. To suppress the effects of this parasitic inductance on SFS JJs, small linear inductors are added to manage the current distribution and improve the parameter margins.

DOI
10.1109/tasc.2023.3260774

Related papers

Superconductor Logic Implementation With All-JJ Inductor-Free Cell Library

Haolin Cong, Sasan Razmkhah, Mustafa Altay Karamuftuoglu +1 more

Single flux quantum (SFQ) technology has garnered significant attention due to its low switching power and high operational speed. Researchers have been actively pursuing more advanced devices and technologies to further reduce the reliance on inductors, bias, and dynamic power. Recently, innovative magnetic Josephson junction devices have emerged, enhancing the field of superconductor electronics logic. This article introduces a novel cell library design that relies entirely on Josephson junctions, showing promising potential for eliminating the need for inductors in conventional SFQ cells. This results in a 55% reduction in cell size and an 80% decrease in both static and dynamic power consumption. The proposed library implements a half flux quantum logic, where each pulse duration is half that of a SFQ pulse. This article presents the schematics of the basic cells, emphasizing critical circuit parameters and their margins. In addition, it examines layout blueprints, showcasing the advantageous area-saving characteristics of the proposed design.

arXiv:2310.13857•IEEE Transactions on Applied Superconductivity•Jul 19, 2024•10 citations

VLSI complexity single flux quantum systems

Jabbari, Tahereh, Friedman, Eby G.

Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.

•Jan 1, 2023•0 citations

Bistable All-Josephson Junction SQUID with Dual Φ-Junctions for State-Controlled Superconducting Circuits

Ayisat Adedokun, Yerzhan Mustafa, Selçuk Köse

A bistable superconducting quantum interference device (SQUID) exclusively comprising Josephson junctions (JJs) is proposed. The design integrates two $2 \Phi$-JJs within the loop structure, while the state of the SQUID is monitored through a conventional $2 \pi$-periodic $\mathbf{J J}$ ($\mathbf{0}$-JJ). This configuration eliminates the need for geometric inductors, leveraging the nonlinear phase dynamics for bistability. Extensive simulations confirm robust bistable operation under controlled external flux bias, positioning the proposed SQUID as an area-efficient building block for superconducting memory cells, sensors for various applications, and SFQ-compatible logic elements.

IEEE Computer Society Annual Symposium on VLSI•Jul 6, 2025•1 citation

Superconductive Logic Using 2ϕ—Josephson Junctions With Half Flux Quantum Pulses

Issa Salameh, Eby G. Friedman, Shahar Kvatinsky

Superconductive logic based on Josephson junctions (JJ) is a promising technology for energy efficient supercomputers and cloud computing. This technology can deliver significant improvements in performance and energy efficiency as compared to CMOS. Superconductive circuits, however, suffer from low density integration as compared to CMOS, primarily due to the limited scalability of the inductors. To improve the scalability of superconductive logic, a logic family based on a novel JJ technology,$2\phi $-JJ, has been proposed that eliminates the inductors. In this brief, three circuits are presented which exploit this scalable inductor-less technology. This novel$2\phi $-JJ technology represents the data as half flux quantum (HFQ) pulses, which improves the energy efficiency and speed as compared to standard superconductive logic such as rapid single flux quantum (RSFQ). Unlike RSFQ, the proposed circuits dynamically switch upon receiving an HFQ pulse, saving energy. These$2\phi $-JJ logic circuits operate 2.25X faster and require 2.6X less energy as compared to RSFQ.

IEEE Transactions on Circuits & Systems II Express Briefs•Mar 28, 2022•16 citations

xeSFQ: clockless SFQ logic with zero bias network power dissipation

Jennifer E. Volk, George Tzimpragos, Oleg A. Mukhanov

Abstract Energy-efficient rapid single flux quantum (ERSFQ) circuits suppress the dominant static power dissipation of Rapid SFQ logic by replacing bias resistors with current-limiting bias Josephson junctions (JJs) and inductors. In practice, however, these JJs introduce power dissipation in the DC bias network due to switching events required to correct data-dependent phase imbalances, with dissipation often comparable to that of dynamic power. This paper presents xeSFQ, a new SFQ logic family that integrates alternating SFQ (xSFQ) encoding with ERSFQ biasing. By enforcing a single pulse per line per logical cycle, xeSFQ maintains uniform phase across the circuit, thereby eliminating bias JJ switching during operation and achieving zero bias network power dissipation. Extensive analog simulations and logic synthesis results, from individual gates to ISCAS and EPFL benchmarks, validate this hypothesis and demonstrate the efficiency and scalability advantages of the proposed approach.

arXiv:2411.03052•Superconductor Science and Technology•Jul 1, 2026•2 citations

SFQ Bias for SFQ Digital Circuits

Vasili K. Semenov, Evan B. Golden, Sergey K. Tolpygo

Superconductor electronics fabrication technology developed at MIT Lincoln Laboratory enables the development of VLSI digital circuits with millions of Josephson junctions per square centimeter. However, conventional DC and multi-phase AC biasing techniques already encounter serious challenges for scaling circuits above several hundred thousand junctions. In this work, we propose a novel AC-based biasing scheme for RSFQ-type logic families requiring DC bias. The major step toward this scheme is a superconducting AC/DC rectifier which we introduced at ASC 2014. We proposed to connect the rectifiers to “payload cells” via superconducting inductors with large inductance in order to reduce parasitic effects of flux quantization. Recently, we discovered that this powering scheme works even better at a much lower value of the inductance, when it is just sufficient to hold only one or two flux quanta in the inductive loop between the converter and the payload. In this case, flux quantization in the loop becomes beneficial because the value of current fed into the payload is defined by the value of the coupling inductance. Therefore, our AC/SFQ converter powers the payload cell by single flux quanta rather than by DC current. Such mode of operation is extremely energy efficient because energy is used only to recover the flux quantum consumed by the cell during the logic operation. We present designs of AC/SFQ converters comprising an AC/DC rectifier and a current conditioning circuit which we termed an SFQ filter. We also present test results and demonstrate AC/SFQ powering a payload circuit using circuits fabricated in a new, 150-nm node of Lincoln Laboratory fabrication technology using self-shunted Nb/AlOx-Al/Nb Josephson junctions with 600 μA/μm2critical current density and 200 nm minimum linewidth of inductors.

arXiv:2012.12405•IEEE Transactions on Applied Superconductivity•Mar 18, 2021•15 citations
The all-JJ logic family is a promising area and power efficient, scalable single flux quantum (SFQ) technology for application to exascale supercomputers. All-JJ superconductive logic is based on a superconductor-ferromagnet-superconductor (SFS) bistable JJ, enabling nanometer feature sizes in VLSI complexity superconductive systems. In this paper, a mechanical analogy is proposed to describe the dynamic behavior of these bistable JJs. Novel all-JJ logic gates, such as TFF, DFF, OR, AND, and NOT gates, are presented here. All-JJ circuits are composed of bistable JJs, standard JJs, and bias currents, not requiring large inductors within the storage loops. All-JJ logic cells exhibit less delay and power than standard SFQ cells with the same critical current density. All-JJ systems can operate at high frequencies due to the small capacitance of the SFS JJ. A complex all-JJ circuit from the suite of ISCAS'85 benchmark circuits is also characterized. This complex all-JJ circuit exhibits less delay and power as compared to standard SFQ logic. The bias current in a conventional benchmark circuit and all-JJ benchmark circuit is, respectively, 22 mA and 13 mA. The delay of each cell within the conventional benchmark circuit and all-JJ benchmark circuit is, respectively, approximately 20 and 8 ps. A parasitic inductance in series with the JJs disturbs the current distribution within the all-JJ circuits while degrading the margins. To suppress the effects of this parasitic inductance on SFS JJs, small linear inductors are added to manage the current distribution and improve the parameter margins.
Single flux quantum (SFQ) technology has garnered significant attention due to its low switching power and high operational speed. Researchers have been actively pursuing more advanced devices and technologies to further reduce the reliance on inductors, bias, and dynamic power. Recently, innovative magnetic Josephson junction devices have emerged, enhancing the field of superconductor electronics logic. This article introduces a novel cell library design that relies entirely on Josephson junctions, showing promising potential for eliminating the need for inductors in conventional SFQ cells. This results in a 55% reduction in cell size and an 80% decrease in both static and dynamic power consumption. The proposed library implements a half flux quantum logic, where each pulse duration is half that of a SFQ pulse. This article presents the schematics of the basic cells, emphasizing critical circuit parameters and their margins. In addition, it examines layout blueprints, showcasing the advantageous area-saving characteristics of the proposed design.
Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.
A bistable superconducting quantum interference device (SQUID) exclusively comprising Josephson junctions (JJs) is proposed. The design integrates two 2Φ2 \Phi2Φ-JJs within the loop structure, while the state of the SQUID is monitored through a conventional 2π2 \pi2π-periodic JJ\mathbf{J J}JJ (0\mathbf{0}0-JJ). This configuration eliminates the need for geometric inductors, leveraging the nonlinear phase dynamics for bistability. Extensive simulations confirm robust bistable operation under controlled external flux bias, positioning the proposed SQUID as an area-efficient building block for superconducting memory cells, sensors for various applications, and SFQ-compatible logic elements.
Superconductive logic based on Josephson junctions (JJ) is a promising technology for energy efficient supercomputers and cloud computing. This technology can deliver significant improvements in performance and energy efficiency as compared to CMOS. Superconductive circuits, however, suffer from low density integration as compared to CMOS, primarily due to the limited scalability of the inductors. To improve the scalability of superconductive logic, a logic family based on a novel JJ technology,$2\phi $-JJ, has been proposed that eliminates the inductors. In this brief, three circuits are presented which exploit this scalable inductor-less technology. This novel$2\phi $-JJ technology represents the data as half flux quantum (HFQ) pulses, which improves the energy efficiency and speed as compared to standard superconductive logic such as rapid single flux quantum (RSFQ). Unlike RSFQ, the proposed circuits dynamically switch upon receiving an HFQ pulse, saving energy. These$2\phi $-JJ logic circuits operate 2.25X faster and require 2.6X less energy as compared to RSFQ.
Abstract Energy-efficient rapid single flux quantum (ERSFQ) circuits suppress the dominant static power dissipation of Rapid SFQ logic by replacing bias resistors with current-limiting bias Josephson junctions (JJs) and inductors. In practice, however, these JJs introduce power dissipation in the DC bias network due to switching events required to correct data-dependent phase imbalances, with dissipation often comparable to that of dynamic power. This paper presents xeSFQ, a new SFQ logic family that integrates alternating SFQ (xSFQ) encoding with ERSFQ biasing. By enforcing a single pulse per line per logical cycle, xeSFQ maintains uniform phase across the circuit, thereby eliminating bias JJ switching during operation and achieving zero bias network power dissipation. Extensive analog simulations and logic synthesis results, from individual gates to ISCAS and EPFL benchmarks, validate this hypothesis and demonstrate the efficiency and scalability advantages of the proposed approach.
Superconductor electronics fabrication technology developed at MIT Lincoln Laboratory enables the development of VLSI digital circuits with millions of Josephson junctions per square centimeter. However, conventional DC and multi-phase AC biasing techniques already encounter serious challenges for scaling circuits above several hundred thousand junctions. In this work, we propose a novel AC-based biasing scheme for RSFQ-type logic families requiring DC bias. The major step toward this scheme is a superconducting AC/DC rectifier which we introduced at ASC 2014. We proposed to connect the rectifiers to “payload cells” via superconducting inductors with large inductance in order to reduce parasitic effects of flux quantization. Recently, we discovered that this powering scheme works even better at a much lower value of the inductance, when it is just sufficient to hold only one or two flux quanta in the inductive loop between the converter and the payload. In this case, flux quantization in the loop becomes beneficial because the value of current fed into the payload is defined by the value of the coupling inductance. Therefore, our AC/SFQ converter powers the payload cell by single flux quanta rather than by DC current. Such mode of operation is extremely energy efficient because energy is used only to recover the flux quantum consumed by the cell during the logic operation. We present designs of AC/SFQ converters comprising an AC/DC rectifier and a current conditioning circuit which we termed an SFQ filter. We also present test results and demonstrate AC/SFQ powering a payload circuit using circuits fabricated in a new, 150-nm node of Lincoln Laboratory fabrication technology using self-shunted Nb/AlOx-Al/Nb Josephson junctions with 600 μA/μm2critical current density and 200 nm minimum linewidth of inductors.