Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Computer Society Annual Symposium on VLSI

Bistable All-Josephson Junction SQUID with Dual Φ-Junctions for State-Controlled Superconducting Circuits

Ayisat Adedokun, Yerzhan Mustafa, Selçuk Köse

Published Jul 6, 2025• 1 citation
Publisher

Abstract

A bistable superconducting quantum interference device (SQUID) exclusively comprising Josephson junctions (JJs) is proposed. The design integrates two $2 \Phi$-JJs within the loop structure, while the state of the SQUID is monitored through a conventional $2 \pi$-periodic $\mathbf{J J}$ ($\mathbf{0}$-JJ). This configuration eliminates the need for geometric inductors, leveraging the nonlinear phase dynamics for bistability. Extensive simulations confirm robust bistable operation under controlled external flux bias, positioning the proposed SQUID as an area-efficient building block for superconducting memory cells, sensors for various applications, and SFQ-compatible logic elements.

DOI
10.1109/isvlsi65124.2025.11130322

Related papers

Superconductor digital circuits with π junctions alone

Feng Li, Yuto Takeshita, Masamitsu Tanaka +1 more

We adopt superconductor/ferromagnet/insulator/superconductor (SFIS) Josephson junctions (JJs) as both switching JJs and intrinsic π phase shifters in superconductor digital circuits. The critical current density (Jc) and characteristic voltage (Vc) of the SFIS junctions are about 22 A/cm2 and 22 μV, respectively. The intrinsic π phase shift is confirmed by measuring the suppressed nominal critical current Icn and half-period-shifted modulation pattern of a π–π–π superconducting quantum interference device (SQUID) that contains three π-JJs in a superconducting loop. A single-flux-quantum (SFQ) circuit composed of a DC/SFQ, Josephson transmission line (JTL), and SFQ/DC converter based on SFIS JJs alone is demonstrated at 4.2 K. The energy dissipation of the SFQ/DC converter decreases by 80% because some JJs are self-biased by the π phase shifter. The intrinsic circulating currents induced by the π phase shifters lead to a narrow bias margin (±5%) and even error function, which can be solved by parameters optimization or circuit initialization in the future. The half-modulation period (Φ0/2) of a half-flux-quantum (HFQ) SQUID (a partial HFQ JTL) exhibits propagation of HFQ between π–π–π SQUIDs, indicating that more complex HFQ circuits can be developed with π-JJs alone in the future.

Applied Physics Letters•Apr 17, 2023•11 citations

Variable superconducting quantum-interference device: Theory

H. J. Fink, V. Grünfeld, S. M. Roberts

A dc superconducting quantum interference device (SQUID) consisting of a symmetric ring circuit with four Josephson junctions and two independent external currents ${I}_{1}$ and ${I}_{2}$, which enter the circuit at different points, has a phase boundary between the fully superconducting and the normal states that is different from that of a conventional SQUID. The control current ${I}_{2}$ modifies the magnetic flux (\ensuremath{\varphi}) periodicity and the value of the maximum measuring current ${I}_{1m}$(\ensuremath{\varphi}). For values of ${I}_{2}$>${I}_{c}$ (critical current of Josephson junction) the fully resistive state exists over flux intervals centered around (n+(1/2)${\ensuremath{\varphi}}_{0}$, where n is an integer and ${\ensuremath{\varphi}}_{0}$ is the fluxoid quantum. A superconducting circuit without Josephson junctions is suggested which should have a phase boundary similar to that found here. Minimization procedures which are usually employed in analyzing SQUID's are discussed.

Physical review. B, Condensed matter•Jul 1, 1987•5 citations

All-JJ Logic Based on Bistable JJs

Tahereh Jabbari, Mark F. Bocko, Eby G. Friedman

The all-JJ logic family is a promising area and power efficient, scalable single flux quantum (SFQ) technology for application to exascale supercomputers. All-JJ superconductive logic is based on a superconductor-ferromagnet-superconductor (SFS) bistable JJ, enabling nanometer feature sizes in VLSI complexity superconductive systems. In this paper, a mechanical analogy is proposed to describe the dynamic behavior of these bistable JJs. Novel all-JJ logic gates, such as TFF, DFF, OR, AND, and NOT gates, are presented here. All-JJ circuits are composed of bistable JJs, standard JJs, and bias currents, not requiring large inductors within the storage loops. All-JJ logic cells exhibit less delay and power than standard SFQ cells with the same critical current density. All-JJ systems can operate at high frequencies due to the small capacitance of the SFS JJ. A complex all-JJ circuit from the suite of ISCAS'85 benchmark circuits is also characterized. This complex all-JJ circuit exhibits less delay and power as compared to standard SFQ logic. The bias current in a conventional benchmark circuit and all-JJ benchmark circuit is, respectively, 22 mA and 13 mA. The delay of each cell within the conventional benchmark circuit and all-JJ benchmark circuit is, respectively, approximately 20 and 8 ps. A parasitic inductance in series with the JJs disturbs the current distribution within the all-JJ circuits while degrading the margins. To suppress the effects of this parasitic inductance on SFS JJs, small linear inductors are added to manage the current distribution and improve the parameter margins.

IEEE Transactions on Applied Superconductivity•Mar 23, 2023•16 citations

Tunable ±φ,φ0 , and φ0±φ Josephson junction

E. Goldobin, D. Koelle, R. Kleiner

We study a 0-$\ensuremath{\pi}$ dc superconducting quantum interference device (SQUID) with asymmetric inductances and critical currents of the two Josephson junctions (JJs). By considering such a dc SQUID as a black box with two terminals, we calculate its effective current-phase relation ${I}_{s}(\ensuremath{\psi})$ and the Josephson energy $U(\ensuremath{\psi})$, where $\ensuremath{\psi}$ is the Josephson phase across the terminals. We show that there is a domain of parameters where the black box has the properties of a $\ensuremath{\varphi}$ JJ with degenerate ground state phases $\ensuremath{\psi}=\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi}$. The $\ensuremath{\varphi}$ domain is rather large, so one can easily construct a $\ensuremath{\varphi}$ JJ experimentally. We derive the current phase relation and show that it can be tuned in situ by applying an external magnetic flux resulting in a continuous transition between the systems with static solutions $\ensuremath{\psi}=\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi},\phantom{\rule{0.16em}{0ex}}\ensuremath{\psi}={\ensuremath{\varphi}}_{0} ({\ensuremath{\varphi}}_{0}\ensuremath{\ne}0,\ensuremath{\pi})$ and even $\ensuremath{\psi}={\ensuremath{\varphi}}_{0}\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi}$. The dependence of ${\ensuremath{\varphi}}_{0}$ on applied magnetic flux is not $2\ensuremath{\pi}$ (one flux quantum) periodic.

arXiv:1504.05858•Physical Review B•Jun 17, 2015•31 citations

Superconductor Logic Implementation With All-JJ Inductor-Free Cell Library

Haolin Cong, Sasan Razmkhah, Mustafa Altay Karamuftuoglu +1 more

Single flux quantum (SFQ) technology has garnered significant attention due to its low switching power and high operational speed. Researchers have been actively pursuing more advanced devices and technologies to further reduce the reliance on inductors, bias, and dynamic power. Recently, innovative magnetic Josephson junction devices have emerged, enhancing the field of superconductor electronics logic. This article introduces a novel cell library design that relies entirely on Josephson junctions, showing promising potential for eliminating the need for inductors in conventional SFQ cells. This results in a 55% reduction in cell size and an 80% decrease in both static and dynamic power consumption. The proposed library implements a half flux quantum logic, where each pulse duration is half that of a SFQ pulse. This article presents the schematics of the basic cells, emphasizing critical circuit parameters and their margins. In addition, it examines layout blueprints, showcasing the advantageous area-saving characteristics of the proposed design.

arXiv:2310.13857•IEEE Transactions on Applied Superconductivity•Jul 19, 2024•10 citations

Compact Model and Circuit Behavior of Bistable 2ϕ-Josephson Junctions

Ana Mitrović, Mark F. Bocko

The 2ϕ-Josephson junctions (JJs), characterized by a dominant second harmonic in the current-phase relationship (CPR), are promising devices for low-power, high-density superconducting digital logic. These junctions eliminate the need for on-chip inductors to store magnetic flux and they reduce bias current requirements. In practical implementations, both first and second harmonic components are typically present in the CPR, affecting the junction dynamics and circuit operation. Understanding this behavior is essential for the reliable design of superconducting logic circuits utilizing these junctions, such as half flux quantum (HFQ) circuits. In this article, a compact Verilog-A model for 2ϕ-JJs is presented that captures the nonlinear behavior of the junctions, accounting for both harmonic contributions and their impact on damping. Two parameter sets are derived from experimental data corresponding to junctions with weak ferromagnetic barriers and ferromagnetic insulator barriers. Based on the inferred parameters, models of each junction type are developed. The model is validated against published experimental results and simulated within a D flip flop cell, demonstrating its use for superconducting circuit design and analysis, including evaluation of circuit behavior under nonideal junction conditions. Stability issues and failure mechanisms introduced by a nonzero first harmonic are analyzed, and underlying junction dynamics are examined to explain the reduction in circuit parameter margins.

IEEE Transactions on Electron Devices•Nov 10, 2025•1 citation
A bistable superconducting quantum interference device (SQUID) exclusively comprising Josephson junctions (JJs) is proposed. The design integrates two 2Φ2 \Phi2Φ-JJs within the loop structure, while the state of the SQUID is monitored through a conventional 2π2 \pi2π-periodic JJ\mathbf{J J}JJ (0\mathbf{0}0-JJ). This configuration eliminates the need for geometric inductors, leveraging the nonlinear phase dynamics for bistability. Extensive simulations confirm robust bistable operation under controlled external flux bias, positioning the proposed SQUID as an area-efficient building block for superconducting memory cells, sensors for various applications, and SFQ-compatible logic elements.
We adopt superconductor/ferromagnet/insulator/superconductor (SFIS) Josephson junctions (JJs) as both switching JJs and intrinsic π phase shifters in superconductor digital circuits. The critical current density (Jc) and characteristic voltage (Vc) of the SFIS junctions are about 22 A/cm2 and 22 μV, respectively. The intrinsic π phase shift is confirmed by measuring the suppressed nominal critical current Icn and half-period-shifted modulation pattern of a π–π–π superconducting quantum interference device (SQUID) that contains three π-JJs in a superconducting loop. A single-flux-quantum (SFQ) circuit composed of a DC/SFQ, Josephson transmission line (JTL), and SFQ/DC converter based on SFIS JJs alone is demonstrated at 4.2 K. The energy dissipation of the SFQ/DC converter decreases by 80% because some JJs are self-biased by the π phase shifter. The intrinsic circulating currents induced by the π phase shifters lead to a narrow bias margin (±5%) and even error function, which can be solved by parameters optimization or circuit initialization in the future. The half-modulation period (Φ0/2) of a half-flux-quantum (HFQ) SQUID (a partial HFQ JTL) exhibits propagation of HFQ between π–π–π SQUIDs, indicating that more complex HFQ circuits can be developed with π-JJs alone in the future.
A dc superconducting quantum interference device (SQUID) consisting of a symmetric ring circuit with four Josephson junctions and two independent external currents I1{I}_{1}I1​ and I2{I}_{2}I2​, which enter the circuit at different points, has a phase boundary between the fully superconducting and the normal states that is different from that of a conventional SQUID. The control current I2{I}_{2}I2​ modifies the magnetic flux (\ensuremath{\varphi}) periodicity and the value of the maximum measuring current I1m{I}_{1m}I1m​(\ensuremath{\varphi}). For values of I2{I}_{2}I2​>Ic{I}_{c}Ic​ (critical current of Josephson junction) the fully resistive state exists over flux intervals centered around (n+(1/2)${\ensuremath{\varphi}}_{0}$, where n is an integer and ${\ensuremath{\varphi}}_{0}$ is the fluxoid quantum. A superconducting circuit without Josephson junctions is suggested which should have a phase boundary similar to that found here. Minimization procedures which are usually employed in analyzing SQUID's are discussed.
The all-JJ logic family is a promising area and power efficient, scalable single flux quantum (SFQ) technology for application to exascale supercomputers. All-JJ superconductive logic is based on a superconductor-ferromagnet-superconductor (SFS) bistable JJ, enabling nanometer feature sizes in VLSI complexity superconductive systems. In this paper, a mechanical analogy is proposed to describe the dynamic behavior of these bistable JJs. Novel all-JJ logic gates, such as TFF, DFF, OR, AND, and NOT gates, are presented here. All-JJ circuits are composed of bistable JJs, standard JJs, and bias currents, not requiring large inductors within the storage loops. All-JJ logic cells exhibit less delay and power than standard SFQ cells with the same critical current density. All-JJ systems can operate at high frequencies due to the small capacitance of the SFS JJ. A complex all-JJ circuit from the suite of ISCAS'85 benchmark circuits is also characterized. This complex all-JJ circuit exhibits less delay and power as compared to standard SFQ logic. The bias current in a conventional benchmark circuit and all-JJ benchmark circuit is, respectively, 22 mA and 13 mA. The delay of each cell within the conventional benchmark circuit and all-JJ benchmark circuit is, respectively, approximately 20 and 8 ps. A parasitic inductance in series with the JJs disturbs the current distribution within the all-JJ circuits while degrading the margins. To suppress the effects of this parasitic inductance on SFS JJs, small linear inductors are added to manage the current distribution and improve the parameter margins.
We study a 0-$\ensuremath{\pi}$ dc superconducting quantum interference device (SQUID) with asymmetric inductances and critical currents of the two Josephson junctions (JJs). By considering such a dc SQUID as a black box with two terminals, we calculate its effective current-phase relation ${I}_{s}(\ensuremath{\psi})$ and the Josephson energy $U(\ensuremath{\psi})$, where $\ensuremath{\psi}$ is the Josephson phase across the terminals. We show that there is a domain of parameters where the black box has the properties of a $\ensuremath{\varphi}$ JJ with degenerate ground state phases $\ensuremath{\psi}=\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi}$. The $\ensuremath{\varphi}$ domain is rather large, so one can easily construct a $\ensuremath{\varphi}$ JJ experimentally. We derive the current phase relation and show that it can be tuned in situ by applying an external magnetic flux resulting in a continuous transition between the systems with static solutions $\ensuremath{\psi}=\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi},\phantom{\rule{0.16em}{0ex}}\ensuremath{\psi}={\ensuremath{\varphi}}_{0} ({\ensuremath{\varphi}}_{0}\ensuremath{\ne}0,\ensuremath{\pi})$ and even $\ensuremath{\psi}={\ensuremath{\varphi}}_{0}\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi}$. The dependence of ${\ensuremath{\varphi}}_{0}$ on applied magnetic flux is not $2\ensuremath{\pi}$ (one flux quantum) periodic.
Single flux quantum (SFQ) technology has garnered significant attention due to its low switching power and high operational speed. Researchers have been actively pursuing more advanced devices and technologies to further reduce the reliance on inductors, bias, and dynamic power. Recently, innovative magnetic Josephson junction devices have emerged, enhancing the field of superconductor electronics logic. This article introduces a novel cell library design that relies entirely on Josephson junctions, showing promising potential for eliminating the need for inductors in conventional SFQ cells. This results in a 55% reduction in cell size and an 80% decrease in both static and dynamic power consumption. The proposed library implements a half flux quantum logic, where each pulse duration is half that of a SFQ pulse. This article presents the schematics of the basic cells, emphasizing critical circuit parameters and their margins. In addition, it examines layout blueprints, showcasing the advantageous area-saving characteristics of the proposed design.
The 2ϕ-Josephson junctions (JJs), characterized by a dominant second harmonic in the current-phase relationship (CPR), are promising devices for low-power, high-density superconducting digital logic. These junctions eliminate the need for on-chip inductors to store magnetic flux and they reduce bias current requirements. In practical implementations, both first and second harmonic components are typically present in the CPR, affecting the junction dynamics and circuit operation. Understanding this behavior is essential for the reliable design of superconducting logic circuits utilizing these junctions, such as half flux quantum (HFQ) circuits. In this article, a compact Verilog-A model for 2ϕ-JJs is presented that captures the nonlinear behavior of the junctions, accounting for both harmonic contributions and their impact on damping. Two parameter sets are derived from experimental data corresponding to junctions with weak ferromagnetic barriers and ferromagnetic insulator barriers. Based on the inferred parameters, models of each junction type are developed. The model is validated against published experimental results and simulated within a D flip flop cell, demonstrating its use for superconducting circuit design and analysis, including evaluation of circuit behavior under nonideal junction conditions. Stability issues and failure mechanisms introduced by a nonzero first harmonic are analyzed, and underlying junction dynamics are examined to explain the reduction in circuit parameter margins.