Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Microfabricated vapor cells filled with a cesium dispensing paste for miniature atomic clocks

Vincent N. Maurice, J. Rutkowski, Eric Kroemer, Sylwester Bargiel, Nicolas Passilly, Rodolphe Boudot, Christophe Gorecki, L. Mauri, M. Moraja

Published Apr 17, 2017• 42 citations
Publisher

Abstract

A method for filling alkali vapor cells with cesium from a dispensing paste is proposed and its compliance with miniature atomic clock applications is evaluated. The paste is an organic-inorganic composition of cesium molybdate, zirconium-aluminum powder, and a hybrid organic-inorganic binder. It is compatible with collective deposition processes such as micro-drop dispensing, which can be done under ambient atmosphere at the wafer-level. After deposition and sealing by anodic bonding, cesium is released from the consolidated paste through local heating with a high power laser. Linear absorption signals have been observed over one year in several cells, showing a stable atomic density. For further validation of this technology for clock applications, one cell has been implemented in a coherent population trapping clock setup to monitor its frequency stability. A fractional frequency aging rate around –4.4 × 10−12 per day has been observed, which is compliant with a clock frequency instability below 1 × 10−11 at one day integration time. This filling method can drastically reduce the cost and the complexity of alkali vapor cell fabrication.

DOI
10.1063/1.4981772

Related papers

Microfabricated Alkali Atom Vapor Cells for Chip Scale Atomic Clock

M.-Z. Huang, Jiashan Zhu, Guangfeng Shi +2 more

In this paper we present a novel fabrication technique for coherent population trapping based chip-sized alkali vapor cells. There are two cavities in the cell design, one is a reaction cavity for alkali dispenser and the other one is a working cavity for alkali storage. An alkali dispenser pill is placed in the reaction cavity and subsequently reacted to obtain pure alkali material. The alkali atoms can be transferred into the working cavity in vapor form once the cell is heated up to 70 degree. Since alkali reacts with many materials and cannot be handled in air, our method provides a low cost and high reproducible way to fabricate highly miniaturized vapor cells. Silicon micromachining and glass-Si-glass three-layer anodic bonding technology is applied to introduce alkali atoms and a buffer gas into the cell and effectively seal this environment within the cell. A rubidium vapor cell is demonstrated using our design. The cell size is 5×4×1.6 mm 3 , with hermetic seal leakage <5e −9 atm cc/s. Modulated optical absorption spectrum of the cell is obtained and matched with pure rubidium atom, indicating the suitability of these cells for use in highly miniaturized atomic frequency references based on CPT excitation scheme. In addition, the entire process is fabricated at the wafer level, with subsequent dicing into individual cells.

Annual Conference of the Chinese Society of Micro-Nano Technology (CSMNT)•Nov 22, 2017•0 citations

Micro-fabricated vapor cells with sealed Rb atoms by distillation at wafer level and two-step bonding for miniature atomic clocks

Hitoshi Nishino, Yasubumi Furuya, Takahito Ono

This paper proposes a new method to fabricate and evaluate Rb vapor cells sealed by two-step bonding for miniature atomic clocks. The proposed method achieves miniaturization and long-term frequency stability by the wafer-level process. First, the vapor cells are fabricated to seal only Rb atoms in vacuum to confirm the absence of residual gases. Second, the vapor cell is fabricated to seal with buffer gases to confirm the stability. The Allan deviation at an averaging time of 3000 s is 1.7 × 10−11. These results show that the proposed method has improved long-term stability compared to the vapor cell fabricated by the conventional method that uses an alkali-atom dispenser.

Optics Express•Nov 25, 2021•16 citations

Micromachined alkali atom vapor cells for chip-scale atomic clocks

Li‐Anne Liew, Svenja A. Knappe, John Moreland +3 more

This paper describes the fabrication of chip-scale alkali atom vapor cells, for use in highly miniaturized atomic frequency references, using silicon micromachining and anodic bonding technology. The cells consist of silicon cavities with internal volume ranging from a few mm/sup 3/ to less than 1 mm/sup 3/. The cells were filled with cesium and nitrogen buffer gas either by chemical reaction of cesium chloride and barium azide, or by direct injection of elemental cesium within a controlled anaerobic environment. Cesium optical absorption spectra were obtained from the cells, and coherent population trapping resonances with linewidths of about 1 kHz were measured.

IEEE International Conference on Micro Electro Mechanical Systems (MEMS)•Aug 2, 2004•15 citations

Fabrication of Cesium Vapor Cells for Chip-Scale Atomic Clock Based on Coherent Population Trapping

Alexey Kazakin, Yu. D. Akul'shin, Yakov Enns +3 more

The article presents the results of the development, fabrication and investigation of miniature cesium vapor cells for quantum frequency standards with optical pumping, working on the effect of coherent population trapping. Microelectromechanical systems technologies were used in the manufacture of cells. For the first time, the dry silicon etching in inductively coupled plasma of sulfur hexafluoride and freon gas in a mixed mode was used to form internal cavities of cells with a thickness of 1.5 mm. Vacuum-tight sealing of cells containing a solid-state source of cesium vapor and buffer gas was carried out by anodic bonding of glass and silicon in a neon atmosphere. The coherent population trapping signal with a linewidth of 750 Hz and a signal-to-noise ratio of 1190 in the 1-Hz bandwidth was observed. Experimental results show that these microcells are appropriate for applications to atomic clock with a relative frequency stability of$6\cdot 10^{-11}$at 1 s.

International Conference on Electrical Engineering and Photonics (EExPolytech)•Oct 20, 2022•1 citation

Locally sealed microfabricated vapor cells filled from an ex situ Cs source

Linda Péroux, A. Dewilde, Ravinder Chutani +8 more

Microfabricated alkali vapor cells are key to enable miniature devices such as atomic clocks and optically pumped magnetometers with reduced size, weight, and power. Yet, more versatile fabrication methods are still needed to further expand their use cases. Here, we demonstrate an approach to collectively fill and seal microfabricated cesium cells using locally sealed microchannels patterned within one of the glass substrates comprising the cells. Unlike current methods that rely on wafer-level anodic bonding as the last sealing step, an approach based on local sealing opens the path to features so far limited to traditional glass-blown cells, including the ability to deposit temperature-sensitive antirelaxation coatings, reaching lower background gas pressure without an additional gettering material or filling with diverse atomic or molecular species.

arXiv:2502.10829•Applied Physics Letters•Apr 1, 2025•5 citations

Microfabricated alkali-vapor cells with tunable He - Ne buffer-gas mixture using reservoirs with laser-actuated break seals

Clément Carlé, Andrei Mursa, G. Faure +6 more

This letter reports on the generation of a tunable buffer gas mixture within microfabricated alkali vapor cells. We show that the combination of low-permeation windows with sequential openings of laser-actuated break-seals enables adjustment of a helium-neon (He-Ne) noble gas mixture, fully compatible with alkali metal dispensers. The gas reservoirs and the main cell cavities are initially sealed at the wafer level under distinct helium and neon atmospheres, respectively. Within each cell, after Cs vapor is released from the dispenser, the break-seals are successively actuated to incrementally increase the helium fraction in the buffer gas mixture. This process shifts the atomic clock frequency turnover temperature toward higher values. As an illustration, one of the fabricated cells was operated at 95$^{\circ}$C in a coherent population trapping clock, achieving a fractional frequency stability of 9$\times$10$^{-11}$ at one-day integration time. These results demonstrate the feasibility of precisely tuning buffer gas compositions in microfabricated vapor cells and support the suitability of He-Ne mixtures for miniature atomic clock applications.

arXiv:2509.00172•Physical Review Applied•Dec 24, 2025•1 citation
A method for filling alkali vapor cells with cesium from a dispensing paste is proposed and its compliance with miniature atomic clock applications is evaluated. The paste is an organic-inorganic composition of cesium molybdate, zirconium-aluminum powder, and a hybrid organic-inorganic binder. It is compatible with collective deposition processes such as micro-drop dispensing, which can be done under ambient atmosphere at the wafer-level. After deposition and sealing by anodic bonding, cesium is released from the consolidated paste through local heating with a high power laser. Linear absorption signals have been observed over one year in several cells, showing a stable atomic density. For further validation of this technology for clock applications, one cell has been implemented in a coherent population trapping clock setup to monitor its frequency stability. A fractional frequency aging rate around –4.4 × 10−12 per day has been observed, which is compliant with a clock frequency instability below 1 × 10−11 at one day integration time. This filling method can drastically reduce the cost and the complexity of alkali vapor cell fabrication.
In this paper we present a novel fabrication technique for coherent population trapping based chip-sized alkali vapor cells. There are two cavities in the cell design, one is a reaction cavity for alkali dispenser and the other one is a working cavity for alkali storage. An alkali dispenser pill is placed in the reaction cavity and subsequently reacted to obtain pure alkali material. The alkali atoms can be transferred into the working cavity in vapor form once the cell is heated up to 70 degree. Since alkali reacts with many materials and cannot be handled in air, our method provides a low cost and high reproducible way to fabricate highly miniaturized vapor cells. Silicon micromachining and glass-Si-glass three-layer anodic bonding technology is applied to introduce alkali atoms and a buffer gas into the cell and effectively seal this environment within the cell. A rubidium vapor cell is demonstrated using our design. The cell size is 5×4×1.6 mm 3 , with hermetic seal leakage <5e −9 atm cc/s. Modulated optical absorption spectrum of the cell is obtained and matched with pure rubidium atom, indicating the suitability of these cells for use in highly miniaturized atomic frequency references based on CPT excitation scheme. In addition, the entire process is fabricated at the wafer level, with subsequent dicing into individual cells.
This paper proposes a new method to fabricate and evaluate Rb vapor cells sealed by two-step bonding for miniature atomic clocks. The proposed method achieves miniaturization and long-term frequency stability by the wafer-level process. First, the vapor cells are fabricated to seal only Rb atoms in vacuum to confirm the absence of residual gases. Second, the vapor cell is fabricated to seal with buffer gases to confirm the stability. The Allan deviation at an averaging time of 3000 s is 1.7 × 10−11. These results show that the proposed method has improved long-term stability compared to the vapor cell fabricated by the conventional method that uses an alkali-atom dispenser.
This paper describes the fabrication of chip-scale alkali atom vapor cells, for use in highly miniaturized atomic frequency references, using silicon micromachining and anodic bonding technology. The cells consist of silicon cavities with internal volume ranging from a few mm/sup 3/ to less than 1 mm/sup 3/. The cells were filled with cesium and nitrogen buffer gas either by chemical reaction of cesium chloride and barium azide, or by direct injection of elemental cesium within a controlled anaerobic environment. Cesium optical absorption spectra were obtained from the cells, and coherent population trapping resonances with linewidths of about 1 kHz were measured.
The article presents the results of the development, fabrication and investigation of miniature cesium vapor cells for quantum frequency standards with optical pumping, working on the effect of coherent population trapping. Microelectromechanical systems technologies were used in the manufacture of cells. For the first time, the dry silicon etching in inductively coupled plasma of sulfur hexafluoride and freon gas in a mixed mode was used to form internal cavities of cells with a thickness of 1.5 mm. Vacuum-tight sealing of cells containing a solid-state source of cesium vapor and buffer gas was carried out by anodic bonding of glass and silicon in a neon atmosphere. The coherent population trapping signal with a linewidth of 750 Hz and a signal-to-noise ratio of 1190 in the 1-Hz bandwidth was observed. Experimental results show that these microcells are appropriate for applications to atomic clock with a relative frequency stability of6⋅10−116\cdot 10^{-11}6⋅10−11at 1 s.
Microfabricated alkali vapor cells are key to enable miniature devices such as atomic clocks and optically pumped magnetometers with reduced size, weight, and power. Yet, more versatile fabrication methods are still needed to further expand their use cases. Here, we demonstrate an approach to collectively fill and seal microfabricated cesium cells using locally sealed microchannels patterned within one of the glass substrates comprising the cells. Unlike current methods that rely on wafer-level anodic bonding as the last sealing step, an approach based on local sealing opens the path to features so far limited to traditional glass-blown cells, including the ability to deposit temperature-sensitive antirelaxation coatings, reaching lower background gas pressure without an additional gettering material or filling with diverse atomic or molecular species.
This letter reports on the generation of a tunable buffer gas mixture within microfabricated alkali vapor cells. We show that the combination of low-permeation windows with sequential openings of laser-actuated break-seals enables adjustment of a helium-neon (He-Ne) noble gas mixture, fully compatible with alkali metal dispensers. The gas reservoirs and the main cell cavities are initially sealed at the wafer level under distinct helium and neon atmospheres, respectively. Within each cell, after Cs vapor is released from the dispenser, the break-seals are successively actuated to incrementally increase the helium fraction in the buffer gas mixture. This process shifts the atomic clock frequency turnover temperature toward higher values. As an illustration, one of the fabricated cells was operated at 95∘^{\circ}∘C in a coherent population trapping clock, achieving a fractional frequency stability of 9$\times101010^{-11}$ at one-day integration time. These results demonstrate the feasibility of precisely tuning buffer gas compositions in microfabricated vapor cells and support the suitability of He-Ne mixtures for miniature atomic clock applications.