Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Annual Conference of the Chinese Society of Micro-Nano Technology (CSMNT)

Microfabricated Alkali Atom Vapor Cells for Chip Scale Atomic Clock

M.-Z. Huang, Jiashan Zhu, Guangfeng Shi, Y. H. Cao, W. J. Wang

Published Nov 22, 2017• 0 citations
Publisher

Abstract

In this paper we present a novel fabrication technique for coherent population trapping based chip-sized alkali vapor cells. There are two cavities in the cell design, one is a reaction cavity for alkali dispenser and the other one is a working cavity for alkali storage. An alkali dispenser pill is placed in the reaction cavity and subsequently reacted to obtain pure alkali material. The alkali atoms can be transferred into the working cavity in vapor form once the cell is heated up to 70 degree. Since alkali reacts with many materials and cannot be handled in air, our method provides a low cost and high reproducible way to fabricate highly miniaturized vapor cells. Silicon micromachining and glass-Si-glass three-layer anodic bonding technology is applied to introduce alkali atoms and a buffer gas into the cell and effectively seal this environment within the cell. A rubidium vapor cell is demonstrated using our design. The cell size is 5×4×1.6 mm 3 , with hermetic seal leakage <5e −9 atm cc/s. Modulated optical absorption spectrum of the cell is obtained and matched with pure rubidium atom, indicating the suitability of these cells for use in highly miniaturized atomic frequency references based on CPT excitation scheme. In addition, the entire process is fabricated at the wafer level, with subsequent dicing into individual cells.

DOI
10.1142/9789813232808_0013

Related papers

Micromachined alkali atom vapor cells for chip-scale atomic clocks

Li‐Anne Liew, Svenja A. Knappe, John Moreland +3 more

This paper describes the fabrication of chip-scale alkali atom vapor cells, for use in highly miniaturized atomic frequency references, using silicon micromachining and anodic bonding technology. The cells consist of silicon cavities with internal volume ranging from a few mm/sup 3/ to less than 1 mm/sup 3/. The cells were filled with cesium and nitrogen buffer gas either by chemical reaction of cesium chloride and barium azide, or by direct injection of elemental cesium within a controlled anaerobic environment. Cesium optical absorption spectra were obtained from the cells, and coherent population trapping resonances with linewidths of about 1 kHz were measured.

IEEE International Conference on Micro Electro Mechanical Systems (MEMS)•Aug 2, 2004•15 citations

Microfabricated alkali atom vapor cells

Li‐Anne Liew, Svenja A. Knappe, John Moreland +3 more

We describe the fabrication of chip-sized alkali atom vapor cells using silicon micromachining and anodic bonding technology. Such cells may find use in highly miniaturized atomic frequency references or magnetometers. The cells consist of cavities etched in silicon, with internal volumes as small as 1 mm3. Two techniques for introducing cesium and a buffer gas into the cells are described: one based on chemical reaction between cesium chloride and barium azide, and the other based on direct injection of elemental cesium within a controlled anaerobic environment. Cesium optical absorption and coherent population trapping resonances were measured in the cells.

Applied Physics Letters•Apr 1, 2004•377 citations

The Microfabricated Alkali Vapor Cell with High Hermeticity for Chip-Scale Atomic Clock

Shuo Jia, Zhiyuan Jiang, Binbin Jiao +4 more

Herein, a microfabricated millimeter-level vapor alkali cell with a high hermeticity is fabricated through a wet etching and single-chip anodic bonding process. The vapor cell, containing Rb and N2, was investigated in a coherent population trapping (CPT) setup for the application of a chip-scale atomic clock (CSAC). The contrast of CPT resonance is up to 1.1% within the only 1 mm length of light interacting with atom. The effects of some critical external parameters on the CPT resonance, such as laser intensity, cell temperature, and buffer gas pressure, are thoroughly studied and optimized. The improved microfabricated vapor cell also exhibited great potential for other chip-scale atomic devices.

Applied Sciences•Jan 3, 2022•21 citations

芯片级铷原子气室的制备

ZhanGuo WANG, Xinkun Li, Fen Wang +2 more

The fabrication processes of chip-scale alkali atom vapor cells are designed, which include silicon micromachining, filling arrays of miniaturized cells with rubidium azide, hermetic packaging using anodic bonding technology, and photodecomposition of rubidium azide. The improved anodic bonding technology is demonstrated and used to improve the gastight bonding of alkali atom vapor cells to the glass/silicon/glass bonding structure. After the anodic bonding of the glass and silicon wafer is finished, an Al metal film with a certain thickness is sputtered at a certain angle at the back (i.e., the glass side) and side of the glass/silicon-bonded structure. Therefore, the electrical contact is led into the silicon wafer when a second anodic bonding is performed, and a high-quality glass/silicon/glass bonding structure is realized. Such anodic structures have great bond strength and gastight bonding of as low as 2.5×10-8Pa·m3·s-1. After gastight sealing, the cells are irradiated with ultraviolet, causing the azide to photodissociate into pure rubidium and nitrogen in situ. Rubidium optical absorption spectrum indicates that rubidium atoms are effectively sealed in the cells. It is confirmed that the process for the fabrication of the chip-scale alkali atom vapor cells is simple and feasible.

Scientia Sinica Informationis•May 1, 2015•1 citation

Wafer-scale fabrication of alkali vapor cells

Yang Li, Marlou R. Slot, Dongyu Sohn +3 more

This paper describes the progress made in developing wafer-scale fabrication process of alkali vapor cells for chip-scale atomic devices such as Coherent Population Trapping (CPT) clocks, optical frequency standards and Rydberg-atom-based sensors. The wafer level fabrication process uses anodic bonding and introduces alkali atoms by chemical reactions of Alkali Chloride with Barium Azide. This method is compatible to make cells with a wide range of buffer gas species and pressures, including evacuated cells. We improve the yield of the cells to above 50%. We will show the residual gas pressures for evacuated cells are mostly consistent with zero within the resolution of the saturation absorption spectroscopy measurement. The temperature coefficients for the CPT spectroscopy are improved with Ar-N2 mixture buffer gas compared with only N2 buffer gas.

Optical and Quantum Sensing and Precision Metrology II•Mar 19, 2025•0 citations

Microfabricated vapor cells filled with a cesium dispensing paste for miniature atomic clocks

Vincent N. Maurice, J. Rutkowski, Eric Kroemer +6 more

A method for filling alkali vapor cells with cesium from a dispensing paste is proposed and its compliance with miniature atomic clock applications is evaluated. The paste is an organic-inorganic composition of cesium molybdate, zirconium-aluminum powder, and a hybrid organic-inorganic binder. It is compatible with collective deposition processes such as micro-drop dispensing, which can be done under ambient atmosphere at the wafer-level. After deposition and sealing by anodic bonding, cesium is released from the consolidated paste through local heating with a high power laser. Linear absorption signals have been observed over one year in several cells, showing a stable atomic density. For further validation of this technology for clock applications, one cell has been implemented in a coherent population trapping clock setup to monitor its frequency stability. A fractional frequency aging rate around –4.4 × 10−12 per day has been observed, which is compliant with a clock frequency instability below 1 × 10−11 at one day integration time. This filling method can drastically reduce the cost and the complexity of alkali vapor cell fabrication.

Applied Physics Letters•Apr 17, 2017•42 citations
In this paper we present a novel fabrication technique for coherent population trapping based chip-sized alkali vapor cells. There are two cavities in the cell design, one is a reaction cavity for alkali dispenser and the other one is a working cavity for alkali storage. An alkali dispenser pill is placed in the reaction cavity and subsequently reacted to obtain pure alkali material. The alkali atoms can be transferred into the working cavity in vapor form once the cell is heated up to 70 degree. Since alkali reacts with many materials and cannot be handled in air, our method provides a low cost and high reproducible way to fabricate highly miniaturized vapor cells. Silicon micromachining and glass-Si-glass three-layer anodic bonding technology is applied to introduce alkali atoms and a buffer gas into the cell and effectively seal this environment within the cell. A rubidium vapor cell is demonstrated using our design. The cell size is 5×4×1.6 mm 3 , with hermetic seal leakage <5e −9 atm cc/s. Modulated optical absorption spectrum of the cell is obtained and matched with pure rubidium atom, indicating the suitability of these cells for use in highly miniaturized atomic frequency references based on CPT excitation scheme. In addition, the entire process is fabricated at the wafer level, with subsequent dicing into individual cells.
This paper describes the fabrication of chip-scale alkali atom vapor cells, for use in highly miniaturized atomic frequency references, using silicon micromachining and anodic bonding technology. The cells consist of silicon cavities with internal volume ranging from a few mm/sup 3/ to less than 1 mm/sup 3/. The cells were filled with cesium and nitrogen buffer gas either by chemical reaction of cesium chloride and barium azide, or by direct injection of elemental cesium within a controlled anaerobic environment. Cesium optical absorption spectra were obtained from the cells, and coherent population trapping resonances with linewidths of about 1 kHz were measured.
We describe the fabrication of chip-sized alkali atom vapor cells using silicon micromachining and anodic bonding technology. Such cells may find use in highly miniaturized atomic frequency references or magnetometers. The cells consist of cavities etched in silicon, with internal volumes as small as 1 mm3. Two techniques for introducing cesium and a buffer gas into the cells are described: one based on chemical reaction between cesium chloride and barium azide, and the other based on direct injection of elemental cesium within a controlled anaerobic environment. Cesium optical absorption and coherent population trapping resonances were measured in the cells.
Herein, a microfabricated millimeter-level vapor alkali cell with a high hermeticity is fabricated through a wet etching and single-chip anodic bonding process. The vapor cell, containing Rb and N2, was investigated in a coherent population trapping (CPT) setup for the application of a chip-scale atomic clock (CSAC). The contrast of CPT resonance is up to 1.1% within the only 1 mm length of light interacting with atom. The effects of some critical external parameters on the CPT resonance, such as laser intensity, cell temperature, and buffer gas pressure, are thoroughly studied and optimized. The improved microfabricated vapor cell also exhibited great potential for other chip-scale atomic devices.
The fabrication processes of chip-scale alkali atom vapor cells are designed, which include silicon micromachining, filling arrays of miniaturized cells with rubidium azide, hermetic packaging using anodic bonding technology, and photodecomposition of rubidium azide. The improved anodic bonding technology is demonstrated and used to improve the gastight bonding of alkali atom vapor cells to the glass/silicon/glass bonding structure. After the anodic bonding of the glass and silicon wafer is finished, an Al metal film with a certain thickness is sputtered at a certain angle at the back (i.e., the glass side) and side of the glass/silicon-bonded structure. Therefore, the electrical contact is led into the silicon wafer when a second anodic bonding is performed, and a high-quality glass/silicon/glass bonding structure is realized. Such anodic structures have great bond strength and gastight bonding of as low as 2.5×10-8Pa·m3·s-1. After gastight sealing, the cells are irradiated with ultraviolet, causing the azide to photodissociate into pure rubidium and nitrogen in situ. Rubidium optical absorption spectrum indicates that rubidium atoms are effectively sealed in the cells. It is confirmed that the process for the fabrication of the chip-scale alkali atom vapor cells is simple and feasible.
This paper describes the progress made in developing wafer-scale fabrication process of alkali vapor cells for chip-scale atomic devices such as Coherent Population Trapping (CPT) clocks, optical frequency standards and Rydberg-atom-based sensors. The wafer level fabrication process uses anodic bonding and introduces alkali atoms by chemical reactions of Alkali Chloride with Barium Azide. This method is compatible to make cells with a wide range of buffer gas species and pressures, including evacuated cells. We improve the yield of the cells to above 50%. We will show the residual gas pressures for evacuated cells are mostly consistent with zero within the resolution of the saturation absorption spectroscopy measurement. The temperature coefficients for the CPT spectroscopy are improved with Ar-N2 mixture buffer gas compared with only N2 buffer gas.
A method for filling alkali vapor cells with cesium from a dispensing paste is proposed and its compliance with miniature atomic clock applications is evaluated. The paste is an organic-inorganic composition of cesium molybdate, zirconium-aluminum powder, and a hybrid organic-inorganic binder. It is compatible with collective deposition processes such as micro-drop dispensing, which can be done under ambient atmosphere at the wafer-level. After deposition and sealing by anodic bonding, cesium is released from the consolidated paste through local heating with a high power laser. Linear absorption signals have been observed over one year in several cells, showing a stable atomic density. For further validation of this technology for clock applications, one cell has been implemented in a coherent population trapping clock setup to monitor its frequency stability. A fractional frequency aging rate around –4.4 × 10−12 per day has been observed, which is compliant with a clock frequency instability below 1 × 10−11 at one day integration time. This filling method can drastically reduce the cost and the complexity of alkali vapor cell fabrication.