Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Flux qubit with a large loop size and tunable Josephson junctions

Hui Deng, Haifeng Yu, Guangming Xue, Ye Tian, Jian-kun Ren, Yulin Wu, Keqiang Huang, Shi-Ping Zhao, Dongning Zheng

Published Apr 1, 2012• 2 citations
Publisher

Abstract

We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.

DOI
10.1088/1674-1056/21/4/040307

Related papers

Gradiometric flux qubits with a tunable gap

M J Schwarz, J Goetz, Z Jiang +4 more

For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit's Josephson junctions by a dc superconducting quantum interference device (SQUID), the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.

arXiv:1210.3982•New Journal of Physics•Apr 4, 2013•39 citations

Controllable coupling in phase-coupled flux qubits

Mun Dae Kim

We propose a scheme for tunable coupling of phase-coupled flux qubits. The phase-coupling scheme can provide a strong coupling strength of the order of Josephson coupling energy of Josephson junctions in the connecting loop, while the previously studied inductive coupling scheme cannot provide due to small mutual inductance and induced currents. We show that, in order to control the coupling, we need two dc SQUID's in the connecting loop and the control fluxes threading the dc SQUID's must be in opposite directions. The coupling strength is analytically calculated as a function of the control flux at the coresonance point.

arXiv:cond-mat/0602604•Physical Review B•Nov 2, 2006•12 citations

Quantum theory of three-junction flux qubit with non-negligible loop inductance: Towards scalability

Timothy L. Robertson, B. L. T. Plourde, P. A. Reichardt +3 more

The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond $0.5$, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.

Physical Review B•May 30, 2006•23 citations

Tunable transformer for qubits based on flux states

Timur V. Filippov, Sergey K. Tolpygo, Jaan Männik +1 more

Flux states of an RF SQUID are promising candidates for the implementation of quantum bits (qubits) for quantum computing. Accurate measurements of the flux states, especially in the time domain, require a controllable coupling between a qubit and a readout circuit (e.g., a dc SQUID magnetometer). Since the readout circuit can also be a source of decoherence, such a controllable coupling also allows one to control (minimize) the back action of the magnetometer. For this purpose we suggest a balanced, tunable transformer. This has a gradiometer configuration such that each arm is broken by a small loop containing two Josephson junctions. As a result the inductance of each arm can be adjusted by an applied bias flux. In the symmetrical case there is no coupling between the qubit and the magnetometer while a desired coupling can be achieved by changing the asymmetry of the arms. Similar transformers may be be useful for achieving controllable, lossless coupling that is required between qubits. Theoretical analysis of the noise back action of the transformer as well as preliminary experimental results are presented.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•27 citations

Flux qubit in a dc SQUID with the 4 π period Josephson effect

Wenchao Huang, Qifeng Liang, Dao‐Xin Yao +1 more

We propose a superconducting flux qubit in a dc SQUID structure, formed by a conventional insulator Josephson junction and a topological nanowire Josephson junction with Majorana bound states. The zero-energy Majorana bound states transport 4 π period Josephson currents in the nanowire junction. The interplay between this 4 π period Josephson effect and the convectional 2 π period Josephson effect in the insulator junction induces a double-well potential energy landscape in the SQUID. As a result, the two lowest-energy levels of the SQUID are isolated from the other levels. These two levels show counterpropagating supercurrents, thus can be used as a flux qubit. We reveal that this flux qubit has the merits of stability to external noises, tolerance to the deviation of system parameters, and scalability to large numbers. Furthermore, we demonstrate how to couple this flux qubit with the Majorana qubit by tuning the junction parameters, and how to use this coupling to manipulate the Majorana qubit.

arXiv:1501.03315•Europhysics Letters (EPL)•May 1, 2015•3 citations

Galvanic coupling of flux qubits: simple theory and tunability

Alec Maassen van den Brink

Galvanic coupling of small-area (three-junction) flux qubits, using shared large Josephson junctions, has been shown to yield appreciable interaction strengths in a flexible design, which does not compromise the junctions' intrinsic good coherence properties. For an introduction, I recapitulate an elementary derivation of the coupling strength, which is subsequently generalized to the case of tunable coupling for a current-biased shared junction. While the ability to vary coupling constants by, say, 20% would be useful in experiments, sign-tunability (implying switchability) is highly preferable for several quantum-computing paradigms. This note sketches two ideas: a "crossbar" design with competing ferro- and antiferromagnetic current-biased tunable couplings, and a "mediated" one involving an extra loop between the qubits. The latter is a variation on proposals for tunable capacitive coupling of charge qubits, and tunable inductive coupling of large-area flux qubits.

arXiv:cond-mat/0605398•May 16, 2006•5 citations
We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.
For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit's Josephson junctions by a dc superconducting quantum interference device (SQUID), the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.
We propose a scheme for tunable coupling of phase-coupled flux qubits. The phase-coupling scheme can provide a strong coupling strength of the order of Josephson coupling energy of Josephson junctions in the connecting loop, while the previously studied inductive coupling scheme cannot provide due to small mutual inductance and induced currents. We show that, in order to control the coupling, we need two dc SQUID's in the connecting loop and the control fluxes threading the dc SQUID's must be in opposite directions. The coupling strength is analytically calculated as a function of the control flux at the coresonance point.
The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond 0.50.50.5, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.
Flux states of an RF SQUID are promising candidates for the implementation of quantum bits (qubits) for quantum computing. Accurate measurements of the flux states, especially in the time domain, require a controllable coupling between a qubit and a readout circuit (e.g., a dc SQUID magnetometer). Since the readout circuit can also be a source of decoherence, such a controllable coupling also allows one to control (minimize) the back action of the magnetometer. For this purpose we suggest a balanced, tunable transformer. This has a gradiometer configuration such that each arm is broken by a small loop containing two Josephson junctions. As a result the inductance of each arm can be adjusted by an applied bias flux. In the symmetrical case there is no coupling between the qubit and the magnetometer while a desired coupling can be achieved by changing the asymmetry of the arms. Similar transformers may be be useful for achieving controllable, lossless coupling that is required between qubits. Theoretical analysis of the noise back action of the transformer as well as preliminary experimental results are presented.
We propose a superconducting flux qubit in a dc SQUID structure, formed by a conventional insulator Josephson junction and a topological nanowire Josephson junction with Majorana bound states. The zero-energy Majorana bound states transport 4 π period Josephson currents in the nanowire junction. The interplay between this 4 π period Josephson effect and the convectional 2 π period Josephson effect in the insulator junction induces a double-well potential energy landscape in the SQUID. As a result, the two lowest-energy levels of the SQUID are isolated from the other levels. These two levels show counterpropagating supercurrents, thus can be used as a flux qubit. We reveal that this flux qubit has the merits of stability to external noises, tolerance to the deviation of system parameters, and scalability to large numbers. Furthermore, we demonstrate how to couple this flux qubit with the Majorana qubit by tuning the junction parameters, and how to use this coupling to manipulate the Majorana qubit.
Galvanic coupling of small-area (three-junction) flux qubits, using shared large Josephson junctions, has been shown to yield appreciable interaction strengths in a flexible design, which does not compromise the junctions' intrinsic good coherence properties. For an introduction, I recapitulate an elementary derivation of the coupling strength, which is subsequently generalized to the case of tunable coupling for a current-biased shared junction. While the ability to vary coupling constants by, say, 20% would be useful in experiments, sign-tunability (implying switchability) is highly preferable for several quantum-computing paradigms. This note sketches two ideas: a "crossbar" design with competing ferro- and antiferromagnetic current-biased tunable couplings, and a "mediated" one involving an extra loop between the qubits. The latter is a variation on proposals for tunable capacitive coupling of charge qubits, and tunable inductive coupling of large-area flux qubits.