Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1210.3982 · New Journal of Physics

Gradiometric flux qubits with a tunable gap

M J Schwarz, J Goetz, Z Jiang, T Niemczyk, Frank Deppe, A Marx, R Gross

Published Apr 4, 2013• 39 citations
arXivHTMLPDF

Abstract

For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit's Josephson junctions by a dc superconducting quantum interference device (SQUID), the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.

DOI
10.1088/1367-2630/15/4/045001

Related papers

Coherent operation of a gap-tunable flux qubit

Xiaobo Zhu, Alexander Kemp, Shiro Saito +1 more

We replace the Josephson junction defining a three-junction flux qubit’s properties with a tunable direct current superconducting quantum interference devices (dc-SQUIDs) in order to tune the qubit gap during the experiment. We observe different gaps as a function of the external magnetic pre-biasing field and the local magnetic field through the dc-SQUID controlled by high-bandwidth on chip control lines. The persistent current and gap behavior correspond to numerical simulation results. We set the sensitivity of the gap on the control lines during the sample design stage. With a tuning range of several gigahertz on a qubit dynamics timescale, we observe coherent system dynamics at the degeneracy point.

arXiv:1008.4016•Applied Physics Letters•Sep 6, 2010•69 citations

Flux qubit with a large loop size and tunable Josephson junctions

Hui Deng, Haifeng Yu, Guangming Xue +6 more

We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.

Chinese Physics B•Apr 1, 2012•2 citations

Quantum theory of three-junction flux qubit with non-negligible loop inductance: Towards scalability

Timothy L. Robertson, B. L. T. Plourde, P. A. Reichardt +3 more

The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond $0.5$, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.

Physical Review B•May 30, 2006•23 citations

Spectroscopy of Josephson-Junction Flux Qubit with Controllable Energy Gap

Yoshihiro Shimazu, Y. Saito, Z. Wada

A double-loop four-Josephson-junction (4-JJ) flux qubit has an advantage over a three-Josephson-junction flux qubit in that the energy gap Δ at the symmetry point can be controlled in situ by varying the magnetic flux in one of the two loops. We report the results of a microwave spectroscopy measurement of a 4-JJ qubit. The magnetic fluxes in the two loops were controlled via a magnetic field and control flux. The excitation energy spectra at various values of control flux indicate the tunability of Δ via the control flux. Two branches of the excitation spectra were observed.

Journal of the Physical Society of Japan•Jun 10, 2009•7 citations

Compound Josephson-junction coupler for flux qubits with minimal crosstalk

R. Harris, Trevor M. Lanting, A. J. Berkley +7 more

An improved tunable coupling element for building networks of coupled rf-superconducting quantum interference device (rf-SQUID) flux qubits has been experimentally demonstrated. This new form of coupler, based on the compound Josephson-junction rf-SQUID, provides a sign and magnitude tunable mutual inductance between qubits with minimal nonlinear crosstalk from the coupler tuning parameter into the qubits. Quantitative agreement is shown between an effective one-dimensional model of the coupler's potential and measurements of the coupler persistent current and susceptibility.

arXiv:0904.3784•Physical Review B•Aug 20, 2009•99 citations

Characterization of a Double-Loop Four-Josephson-Junction Flux Qubit with Controllable Energy Gap

Yoshihiro Shimazu, Y. Saito, Z. Wada

Superconducting qubits are employed for the practical implementation of scalable quantum information processors. Fault-tolerant quantum computation schemes using superconducting qubits is under intensive study. Among the various kinds of superconducting qubits, flux qubits have a significant advantage in that they can be made insensitive to randomly fluctuating charges in the substrate. Here, the characterization results of a double-loop four-Josephson-junction flux qubit is reported. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz. Spectroscopic measurements directly demonstrated the controllability of the energy gap. In addition, doublet splitting due to intercell tunneling was observed for the first time.

Book Publisher International (a part of SCIENCEDOMAIN International)•Aug 19, 2024•0 citations
For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit's Josephson junctions by a dc superconducting quantum interference device (SQUID), the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.
We replace the Josephson junction defining a three-junction flux qubit’s properties with a tunable direct current superconducting quantum interference devices (dc-SQUIDs) in order to tune the qubit gap during the experiment. We observe different gaps as a function of the external magnetic pre-biasing field and the local magnetic field through the dc-SQUID controlled by high-bandwidth on chip control lines. The persistent current and gap behavior correspond to numerical simulation results. We set the sensitivity of the gap on the control lines during the sample design stage. With a tuning range of several gigahertz on a qubit dynamics timescale, we observe coherent system dynamics at the degeneracy point.
We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.
The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond 0.50.50.5, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.
A double-loop four-Josephson-junction (4-JJ) flux qubit has an advantage over a three-Josephson-junction flux qubit in that the energy gap Δ at the symmetry point can be controlled in situ by varying the magnetic flux in one of the two loops. We report the results of a microwave spectroscopy measurement of a 4-JJ qubit. The magnetic fluxes in the two loops were controlled via a magnetic field and control flux. The excitation energy spectra at various values of control flux indicate the tunability of Δ via the control flux. Two branches of the excitation spectra were observed.
An improved tunable coupling element for building networks of coupled rf-superconducting quantum interference device (rf-SQUID) flux qubits has been experimentally demonstrated. This new form of coupler, based on the compound Josephson-junction rf-SQUID, provides a sign and magnitude tunable mutual inductance between qubits with minimal nonlinear crosstalk from the coupler tuning parameter into the qubits. Quantitative agreement is shown between an effective one-dimensional model of the coupler's potential and measurements of the coupler persistent current and susceptibility.
Superconducting qubits are employed for the practical implementation of scalable quantum information processors. Fault-tolerant quantum computation schemes using superconducting qubits is under intensive study. Among the various kinds of superconducting qubits, flux qubits have a significant advantage in that they can be made insensitive to randomly fluctuating charges in the substrate. Here, the characterization results of a double-loop four-Josephson-junction flux qubit is reported. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz. Spectroscopic measurements directly demonstrated the controllability of the energy gap. In addition, doublet splitting due to intercell tunneling was observed for the first time.