Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review B

Quantum theory of three-junction flux qubit with non-negligible loop inductance: Towards scalability

Timothy L. Robertson, B. L. T. Plourde, P. A. Reichardt, T. Hime, C.-E. Wu, John L. Clarke

Published May 30, 2006• 23 citations
Publisher

Abstract

The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond $0.5$, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.

DOI
10.1103/physrevb.73.174526

Related papers

Flux qubit with a large loop size and tunable Josephson junctions

Hui Deng, Haifeng Yu, Guangming Xue +6 more

We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.

Chinese Physics B•Apr 1, 2012•2 citations

Decoherence rates in complex Josephson qubit circuits

David Peter Divincenzo, Frederico Brito, R. H. Koch

A complete analysis of the decoherence properties of a Josephson junction qubit is presented. The qubit is of the flux type and consists of two large loops forming a gradiometer, one small loop, and three Josephson junctions. We develop a complete, quantitative description of the inductances and capacitances of the circuit. Including two stray capacitances makes the quantum mechanical modeling of the system five dimensional. To make the required calculation tractable, we devise a general Born-Oppenheimer approximation which reduces the effective dimensionality in the calculation to one. Contributions to relaxation $({T}_{1})$ and dephasing $({T}_{\ensuremath{\phi}})$ arising from two different control circuits, one coupled to the small loop and one coupled to a large loop, is computed. We explore ${T}_{1}$ and ${T}_{\ensuremath{\phi}}$ along an optimal line in the space of applied fluxes; along this ``S line'' we see significant and rapidly varying contributions to the decoherence parameters, primarily from the circuit coupling to the large loop.

arXiv:cond-mat/0510843•Physical Review B•Jul 25, 2006•28 citations

Hamiltonian for coupled flux qubits

Alec Maassen van den Brink

An effective Hamiltonian is derived for two coupled three-Josephson-junction (3JJ) qubits. This is not quite trivial, for the customary ``free'' 3JJ Hamiltonian is written in the limit of zero inductance $L$. Neglecting the self-flux is already dubious for one qubit when it comes to readout, and becomes untenable when discussing inductive coupling. First, inductance effects are analyzed for a single qubit. For small $L$, the self-flux is a ``fast variable,'' which can be eliminated adiabatically. However, the commonly used junction phases are not appropriate ``slow variables,'' and instead one introduces degrees of freedom that are decoupled from the loop current to leading order. In the quantum case, the zero-point fluctuations ($LC$ oscillations) in the loop current diverge as $L\ensuremath{\rightarrow}0$. While their effect thus formally dominates over the classical self-flux, it merely renormalizes the Josephson couplings of the effective (two-phase) theory. In the coupled case, the strong zero-point fluctuations render the full (six-phase) wave function significantly entangled in leading order. However, in going to the four-phase theory, this uncontrollable entanglement is integrated out completely, leaving a computationally usable mutual-inductance term of the expected form as the effective interaction.

arXiv:cond-mat/0310425•Physical Review B•Feb 8, 2005•20 citations

Gradiometric flux qubits with a tunable gap

M J Schwarz, J Goetz, Z Jiang +4 more

For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit's Josephson junctions by a dc superconducting quantum interference device (SQUID), the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.

arXiv:1210.3982•New Journal of Physics•Apr 4, 2013•39 citations

Quarton qubits with stacked Josephson junctions

Alex Kreuzer

Superconducting quantum circuits rely on compact, low-loss inductive elements, strong anharmonicity, and robust flux biasing to realize coherent and controllable quantum bits. This thesis investigates how vertically stacked Josephson junction arrays can be employed to meet these requirements and enable compact flux qubits operated in the quarton regime. In the first part, stacked Al/AlOx/Al Josephson junctions are established as compact linear inductors. Their three-dimensional geometry reduces parasitic capacitance to ground while allowing multiple junctions to be integrated within a small footprint. A numerical modeling approach is used to quantify stray capacitances, Coulomb screening, and collective modes of extended stacked junction arrays. Cryogenic transport measurements confirm strongly underdamped junction dynamics with uniform junction characteristics, demonstrating their suitability as low-loss inductive elements in superconducting circuits. In the second part, these inductors are integrated into flux qubits operated in the quarton regime. In this regime, the qubit potential becomes nearly quartic around half-flux bias, resulting in positive anharmonicity and first-order insensitivity to flux noise at the operating point. Spectroscopy reveals qubit transition frequencies in the 3–5 GHz range and anharmonicities of 0.5–1.5 GHz, consistent with the expected quartic potential landscape. To distinguish intrinsic from externally induced decoherence, a persistent-current bias scheme is implemented, enabling stable and low-noise flux biasing over time scales of up to one week. A direct comparison between conventionally biased and persistently biased devices rules out external flux noise as the dominant coherence-limiting mechanism. High-resolution spectroscopy identifies avoided level crossings caused by microscopic two-level systems (TLS) in the amorphous tunnel barriers of the stacked junctions. A systematic cumulative analysis of splitting statistics across multiple devices shows that the spectral TLS density scales with the total tunnel-barrier area, while the array length determines the effective qubit–TLS coupling strength. The measured relaxation times follow scaling relations consistent with Fermi’s golden rule for a bath of weakly coupled TLS, demonstrating that TLS in the stacked junction arrays constitute the dominant intrinsic decoherence channel in quarton qubits. These results establish stacked Josephson junction arrays as compact superinductive elements and provide an understanding of coherence limitations in superconducting quantum circuits based on Josephson junction arrays, offering guidance for future device optimization.

•Jan 1, 2026•0 citations

Single and coupled Josephson junction quantum bits

A. C. J. ter Haar

In this thesis measurements on single and coupled Josephson persistent current qubits are presented. The Josephson persistent current qubit consists of a superconducting loop intersected by three Josephson junctions. When half a flux quantum is applied to the loop this system acts as a quantum two state system. The two states are associated with a clock or anti clockwise current flowing in the loop and can be measured using a SQUID magnetometer. The research presented in this thesis aimed at achieving coupling between two Josephson persistent current qubits and to show conditional gate operations in such a coupled qubit system. Also it was tried to improve the coherence properties of a single qubit by using a gradiometer type configuration to minimize influence from fluxnoise which would cause a disturbance of the energy bias of the qubit system. The basic principles of the Josephson persistent current qubit are discussed, as well as design criteria to minimize decoherence due to the environment seen by the squid or microwave lines. Spectroscopy measurements have been performed on coupled qubit systems mapping out the energy level structure of these systems. For two coupled qubits the origin and magnitude of the coupling J is derived for coupling via the geometrical inductance between the qubits. Also it is shown that coupling via a shared junction or a shared line acts the same as the geometrical coupling. Spectroscopy measurements show coupling for qubits which are mainly geometrical coupled and spectroscopy measurements on an other sample show a coupling for qubits coupled via a large shared Josephson junction. Using such a shared junction allows for the coupling to be designed within a large range. For the coupled qubit system with coupling via a large junction spectroscopy measurements from both the ground state to higher states as well as from the partially populated first excited state to higher states have been performed and the level structure of this system is mapped out. The energy level structure is in good agreement with the 4 level approximation for two coupled qubits. Coherent Rabi oscillations between two states flipping either qubit of this system have been performed with an oscillation decay time of up to 70ns. Also conditional spectroscopy has been performed by first going coherently from the ground state to a higher state and then incoherently pumping the system to other states. Spectroscopy measurements on a gradiometer type Josephson persistent current qubit show trapped fluxoid biasing can be used to create a phase bias of pi over the qubit junctions. The results of this thesis show that coupling between Josephson persistent current qubits can be achieved and designed within the wanted range. Superpositions between the ground state and higher states in such a coupled qubit system have been created by performing Rabi oscillations. Also conditional spectroscopy has been performed.

•Feb 2, 2005•3 citations
The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio \ensuremathβQ{\ensuremath{\beta}}_{Q}\ensuremathβQ​ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of \ensuremathβQ{\ensuremath{\beta}}_{Q}\ensuremathβQ​. As \ensuremathβQ{\ensuremath{\beta}}_{Q}\ensuremathβQ​ is increased beyond 0.50.50.5, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.
We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.
A complete analysis of the decoherence properties of a Josephson junction qubit is presented. The qubit is of the flux type and consists of two large loops forming a gradiometer, one small loop, and three Josephson junctions. We develop a complete, quantitative description of the inductances and capacitances of the circuit. Including two stray capacitances makes the quantum mechanical modeling of the system five dimensional. To make the required calculation tractable, we devise a general Born-Oppenheimer approximation which reduces the effective dimensionality in the calculation to one. Contributions to relaxation (T1)({T}_{1})(T1​) and dephasing $({T}_{\ensuremath{\phi}})$ arising from two different control circuits, one coupled to the small loop and one coupled to a large loop, is computed. We explore T1{T}_{1}T1​ and ${T}_{\ensuremath{\phi}}$ along an optimal line in the space of applied fluxes; along this ``S line'' we see significant and rapidly varying contributions to the decoherence parameters, primarily from the circuit coupling to the large loop.
An effective Hamiltonian is derived for two coupled three-Josephson-junction (3JJ) qubits. This is not quite trivial, for the customary ``free'' 3JJ Hamiltonian is written in the limit of zero inductance LLL. Neglecting the self-flux is already dubious for one qubit when it comes to readout, and becomes untenable when discussing inductive coupling. First, inductance effects are analyzed for a single qubit. For small LLL, the self-flux is a ``fast variable,'' which can be eliminated adiabatically. However, the commonly used junction phases are not appropriate ``slow variables,'' and instead one introduces degrees of freedom that are decoupled from the loop current to leading order. In the quantum case, the zero-point fluctuations (LCLCLC oscillations) in the loop current diverge as $L\ensuremath{\rightarrow}0$. While their effect thus formally dominates over the classical self-flux, it merely renormalizes the Josephson couplings of the effective (two-phase) theory. In the coupled case, the strong zero-point fluctuations render the full (six-phase) wave function significantly entangled in leading order. However, in going to the four-phase theory, this uncontrollable entanglement is integrated out completely, leaving a computationally usable mutual-inductance term of the expected form as the effective interaction.
For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit's Josephson junctions by a dc superconducting quantum interference device (SQUID), the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.
Superconducting quantum circuits rely on compact, low-loss inductive elements, strong anharmonicity, and robust flux biasing to realize coherent and controllable quantum bits. This thesis investigates how vertically stacked Josephson junction arrays can be employed to meet these requirements and enable compact flux qubits operated in the quarton regime. In the first part, stacked Al/AlOx/Al Josephson junctions are established as compact linear inductors. Their three-dimensional geometry reduces parasitic capacitance to ground while allowing multiple junctions to be integrated within a small footprint. A numerical modeling approach is used to quantify stray capacitances, Coulomb screening, and collective modes of extended stacked junction arrays. Cryogenic transport measurements confirm strongly underdamped junction dynamics with uniform junction characteristics, demonstrating their suitability as low-loss inductive elements in superconducting circuits. In the second part, these inductors are integrated into flux qubits operated in the quarton regime. In this regime, the qubit potential becomes nearly quartic around half-flux bias, resulting in positive anharmonicity and first-order insensitivity to flux noise at the operating point. Spectroscopy reveals qubit transition frequencies in the 3–5 GHz range and anharmonicities of 0.5–1.5 GHz, consistent with the expected quartic potential landscape. To distinguish intrinsic from externally induced decoherence, a persistent-current bias scheme is implemented, enabling stable and low-noise flux biasing over time scales of up to one week. A direct comparison between conventionally biased and persistently biased devices rules out external flux noise as the dominant coherence-limiting mechanism. High-resolution spectroscopy identifies avoided level crossings caused by microscopic two-level systems (TLS) in the amorphous tunnel barriers of the stacked junctions. A systematic cumulative analysis of splitting statistics across multiple devices shows that the spectral TLS density scales with the total tunnel-barrier area, while the array length determines the effective qubit–TLS coupling strength. The measured relaxation times follow scaling relations consistent with Fermi’s golden rule for a bath of weakly coupled TLS, demonstrating that TLS in the stacked junction arrays constitute the dominant intrinsic decoherence channel in quarton qubits. These results establish stacked Josephson junction arrays as compact superinductive elements and provide an understanding of coherence limitations in superconducting quantum circuits based on Josephson junction arrays, offering guidance for future device optimization.
In this thesis measurements on single and coupled Josephson persistent current qubits are presented. The Josephson persistent current qubit consists of a superconducting loop intersected by three Josephson junctions. When half a flux quantum is applied to the loop this system acts as a quantum two state system. The two states are associated with a clock or anti clockwise current flowing in the loop and can be measured using a SQUID magnetometer. The research presented in this thesis aimed at achieving coupling between two Josephson persistent current qubits and to show conditional gate operations in such a coupled qubit system. Also it was tried to improve the coherence properties of a single qubit by using a gradiometer type configuration to minimize influence from fluxnoise which would cause a disturbance of the energy bias of the qubit system. The basic principles of the Josephson persistent current qubit are discussed, as well as design criteria to minimize decoherence due to the environment seen by the squid or microwave lines. Spectroscopy measurements have been performed on coupled qubit systems mapping out the energy level structure of these systems. For two coupled qubits the origin and magnitude of the coupling J is derived for coupling via the geometrical inductance between the qubits. Also it is shown that coupling via a shared junction or a shared line acts the same as the geometrical coupling. Spectroscopy measurements show coupling for qubits which are mainly geometrical coupled and spectroscopy measurements on an other sample show a coupling for qubits coupled via a large shared Josephson junction. Using such a shared junction allows for the coupling to be designed within a large range. For the coupled qubit system with coupling via a large junction spectroscopy measurements from both the ground state to higher states as well as from the partially populated first excited state to higher states have been performed and the level structure of this system is mapped out. The energy level structure is in good agreement with the 4 level approximation for two coupled qubits. Coherent Rabi oscillations between two states flipping either qubit of this system have been performed with an oscillation decay time of up to 70ns. Also conditional spectroscopy has been performed by first going coherently from the ground state to a higher state and then incoherently pumping the system to other states. Spectroscopy measurements on a gradiometer type Josephson persistent current qubit show trapped fluxoid biasing can be used to create a phase bias of pi over the qubit junctions. The results of this thesis show that coupling between Josephson persistent current qubits can be achieved and designed within the wanted range. Superpositions between the ground state and higher states in such a coupled qubit system have been created by performing Rabi oscillations. Also conditional spectroscopy has been performed.