Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1501.03315 · Europhysics Letters (EPL)

Flux qubit in a dc SQUID with the 4 π period Josephson effect

Wenchao Huang, Qifeng Liang, Dao‐Xin Yao, Zhi Wang

Published May 1, 2015• 3 citations
arXivHTMLPDF

Abstract

We propose a superconducting flux qubit in a dc SQUID structure, formed by a conventional insulator Josephson junction and a topological nanowire Josephson junction with Majorana bound states. The zero-energy Majorana bound states transport 4 π period Josephson currents in the nanowire junction. The interplay between this 4 π period Josephson effect and the convectional 2 π period Josephson effect in the insulator junction induces a double-well potential energy landscape in the SQUID. As a result, the two lowest-energy levels of the SQUID are isolated from the other levels. These two levels show counterpropagating supercurrents, thus can be used as a flux qubit. We reveal that this flux qubit has the merits of stability to external noises, tolerance to the deviation of system parameters, and scalability to large numbers. Furthermore, we demonstrate how to couple this flux qubit with the Majorana qubit by tuning the junction parameters, and how to use this coupling to manipulate the Majorana qubit.

DOI
10.1209/0295-5075/110/37010

Related papers

Flux qubit with a large loop size and tunable Josephson junctions

Hui Deng, Haifeng Yu, Guangming Xue +6 more

We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.

Chinese Physics B•Apr 1, 2012•2 citations

Observation of Qubit State with a dc-SQUID and Dissipation Effect in the SQUID

Hideaki Takayanagi, Hirotaka Tanaka, Shiro Saito +1 more

Two states of a flux qubit with three Josephson junctions were shown in a single measurement with a dc-SQUID. The qubit is an aluminum superconductor loop surrounded by a dc-SQUID for readout. It has two states, which have persistent currents flowing in opposite directions. The readout data for three samples with different junction sizes suggest that the probability distribution for the double-well potential depends on the ratio of E J / E C , where E J is the Josephson energy and E C is the charging energy. The probability distribution was estimated by calculating the wavefunctions and energy levels for the measured samples. We measured the retrapping current of a dc-SQUID without the qubit as a function of the magnetic field. It was found that the relative phase relation for the magnetic field dependence of the retrapping current jumped from 0 to π at E J ≈ E C . This jump can be explained phenomenologically by taking into account the two kinds of dissipation arising from ac currents flowing through the lead and along the SQUID loop. The fact that the jump occurred at E J ≈ E C strongly suggests that the quantum nature of the electromagnetic environment needs to be taken into account in order to understand the origin of the dissipation.

Physica Scripta•Jan 1, 2002•10 citations

Observation of Qubit State with a dc-SQUID and Dissipation Effect in the SQUID

Hideaki Takayanagi, Hirotaka Tanaka, Shiro Saito +1 more

Two states of a flux qubit with three Josephson junctions were shown in a single measurement with a dc-SQUID. The qubit is an aluminum superconductor loop surrounded by a dc-SQUID for readout. It has two states, which have persistent currents flowing in opposite directions. The readout data for three samples with different junction sizes suggest that the probability distribution for the double-well potential depends on the ratio of E J /E C , where E J is the Josephson energy and E C is the charging energy. The probability distribution was estimated by calculating the wavefunctions and energy levels for the measured samples. We measured the retrapping current of a dc-SQUID without the qubit as a function of the magnetic field. It was found that the relative phase relation for the magnetic field dependence of the retrapping current jumped from 0 to π at E J ≈ E C . This jump can be explained phenomenologically by taking into account the two kinds of dissipation arising from ac currents flowing through the lead and along the SQUID loop. The fact that the jump occurred at E J ≈ E C strongly suggests that the quantum nature of the electromagnetic environment needs to be taken into account in order to understand the origin of the dissipation.

Condensation and Coherence in Condensed Matter•Mar 1, 2003•0 citations

Tunable ±φ,φ0 , and φ0±φ Josephson junction

E. Goldobin, D. Koelle, R. Kleiner

We study a 0-$\ensuremath{\pi}$ dc superconducting quantum interference device (SQUID) with asymmetric inductances and critical currents of the two Josephson junctions (JJs). By considering such a dc SQUID as a black box with two terminals, we calculate its effective current-phase relation ${I}_{s}(\ensuremath{\psi})$ and the Josephson energy $U(\ensuremath{\psi})$, where $\ensuremath{\psi}$ is the Josephson phase across the terminals. We show that there is a domain of parameters where the black box has the properties of a $\ensuremath{\varphi}$ JJ with degenerate ground state phases $\ensuremath{\psi}=\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi}$. The $\ensuremath{\varphi}$ domain is rather large, so one can easily construct a $\ensuremath{\varphi}$ JJ experimentally. We derive the current phase relation and show that it can be tuned in situ by applying an external magnetic flux resulting in a continuous transition between the systems with static solutions $\ensuremath{\psi}=\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi},\phantom{\rule{0.16em}{0ex}}\ensuremath{\psi}={\ensuremath{\varphi}}_{0} ({\ensuremath{\varphi}}_{0}\ensuremath{\ne}0,\ensuremath{\pi})$ and even $\ensuremath{\psi}={\ensuremath{\varphi}}_{0}\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi}$. The dependence of ${\ensuremath{\varphi}}_{0}$ on applied magnetic flux is not $2\ensuremath{\pi}$ (one flux quantum) periodic.

arXiv:1504.05858•Physical Review B•Jun 17, 2015•31 citations

Controllable π SQUID

J. J. A. Baselmans, Bart Jan van Wees, T. M. Klapwijk

We have fabricated and studied a promising kind of direct current superconducting quantum interference device (dc-SQUID) in which the magnitude and sign of the critical current of the individual Josephson junctions can be controlled by additional voltage probes connected to the junctions. We show that the amplitude of the voltage oscillations of the SQUID as a function of the applied magnetic field can be tuned and that the phase of the oscillations can be switched between 0 and π in the temperature range of 0.1–4.2 K using a suitable control voltage. This is equivalent to the external application of (n+1/2) flux quantum.

arXiv:cond-mat/0107292•Applied Physics Letters•Oct 29, 2001•28 citations

Superconducting flux qubit with ferromagnetic Josephson π-junction operating at zero magnetic field

Sunmi Kim, Leonid Victorovich Abdurakhimov, Duong Pham +6 more

Conventional superconducting flux qubits require the application of a precisely tuned magnetic field to set the operation point at half a flux quantum through the qubit loop, which complicates the on-chip integration of this type of device. It has been proposed that by inducing a π-phase shift in the superconducting order parameter using a precisely controlled nanoscale-thickness superconductor/ferromagnet/superconductor Josephson junction, commonly referred to as π-junction, it is possible to realize a flux qubit operating at zero magnetic flux. Here, we report the realization of a zero-flux-biased flux qubit based on three NbN/AlN/NbN Josephson junctions and a NbN/PdNi/NbN ferromagnetic π-junction. The qubit lifetime is in the microsecond range, which we argue is limited by quasiparticle excitations in the metallic ferromagnet layer. Our results pave the way for developing quantum coherent devices, including qubits and sensors, that utilize the interplay between ferromagnetism and superconductivity. Conventional superconducting flux qubits require a finely tuned magnetic field to operate, hindering their on-chip integration. Here, ferromagnetic Josephson junctions with a π-phase shift in the superconducting order parameter allow the realization of a flux qubit operating at zero magnetic field.

arXiv:2401.14597•Communications Materials•Oct 11, 2024•26 citations
We propose a superconducting flux qubit in a dc SQUID structure, formed by a conventional insulator Josephson junction and a topological nanowire Josephson junction with Majorana bound states. The zero-energy Majorana bound states transport 4 π period Josephson currents in the nanowire junction. The interplay between this 4 π period Josephson effect and the convectional 2 π period Josephson effect in the insulator junction induces a double-well potential energy landscape in the SQUID. As a result, the two lowest-energy levels of the SQUID are isolated from the other levels. These two levels show counterpropagating supercurrents, thus can be used as a flux qubit. We reveal that this flux qubit has the merits of stability to external noises, tolerance to the deviation of system parameters, and scalability to large numbers. Furthermore, we demonstrate how to couple this flux qubit with the Majorana qubit by tuning the junction parameters, and how to use this coupling to manipulate the Majorana qubit.
We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.
Two states of a flux qubit with three Josephson junctions were shown in a single measurement with a dc-SQUID. The qubit is an aluminum superconductor loop surrounded by a dc-SQUID for readout. It has two states, which have persistent currents flowing in opposite directions. The readout data for three samples with different junction sizes suggest that the probability distribution for the double-well potential depends on the ratio of E J / E C , where E J is the Josephson energy and E C is the charging energy. The probability distribution was estimated by calculating the wavefunctions and energy levels for the measured samples. We measured the retrapping current of a dc-SQUID without the qubit as a function of the magnetic field. It was found that the relative phase relation for the magnetic field dependence of the retrapping current jumped from 0 to π at E J ≈ E C . This jump can be explained phenomenologically by taking into account the two kinds of dissipation arising from ac currents flowing through the lead and along the SQUID loop. The fact that the jump occurred at E J ≈ E C strongly suggests that the quantum nature of the electromagnetic environment needs to be taken into account in order to understand the origin of the dissipation.
Two states of a flux qubit with three Josephson junctions were shown in a single measurement with a dc-SQUID. The qubit is an aluminum superconductor loop surrounded by a dc-SQUID for readout. It has two states, which have persistent currents flowing in opposite directions. The readout data for three samples with different junction sizes suggest that the probability distribution for the double-well potential depends on the ratio of E J /E C , where E J is the Josephson energy and E C is the charging energy. The probability distribution was estimated by calculating the wavefunctions and energy levels for the measured samples. We measured the retrapping current of a dc-SQUID without the qubit as a function of the magnetic field. It was found that the relative phase relation for the magnetic field dependence of the retrapping current jumped from 0 to π at E J ≈ E C . This jump can be explained phenomenologically by taking into account the two kinds of dissipation arising from ac currents flowing through the lead and along the SQUID loop. The fact that the jump occurred at E J ≈ E C strongly suggests that the quantum nature of the electromagnetic environment needs to be taken into account in order to understand the origin of the dissipation.
We study a 0-$\ensuremath{\pi}$ dc superconducting quantum interference device (SQUID) with asymmetric inductances and critical currents of the two Josephson junctions (JJs). By considering such a dc SQUID as a black box with two terminals, we calculate its effective current-phase relation ${I}_{s}(\ensuremath{\psi})$ and the Josephson energy $U(\ensuremath{\psi})$, where $\ensuremath{\psi}$ is the Josephson phase across the terminals. We show that there is a domain of parameters where the black box has the properties of a $\ensuremath{\varphi}$ JJ with degenerate ground state phases $\ensuremath{\psi}=\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi}$. The $\ensuremath{\varphi}$ domain is rather large, so one can easily construct a $\ensuremath{\varphi}$ JJ experimentally. We derive the current phase relation and show that it can be tuned in situ by applying an external magnetic flux resulting in a continuous transition between the systems with static solutions $\ensuremath{\psi}=\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi},\phantom{\rule{0.16em}{0ex}}\ensuremath{\psi}={\ensuremath{\varphi}}_{0} ({\ensuremath{\varphi}}_{0}\ensuremath{\ne}0,\ensuremath{\pi})$ and even $\ensuremath{\psi}={\ensuremath{\varphi}}_{0}\ifmmode\pm\else\textpm\fi{}\ensuremath{\varphi}$. The dependence of ${\ensuremath{\varphi}}_{0}$ on applied magnetic flux is not $2\ensuremath{\pi}$ (one flux quantum) periodic.
We have fabricated and studied a promising kind of direct current superconducting quantum interference device (dc-SQUID) in which the magnitude and sign of the critical current of the individual Josephson junctions can be controlled by additional voltage probes connected to the junctions. We show that the amplitude of the voltage oscillations of the SQUID as a function of the applied magnetic field can be tuned and that the phase of the oscillations can be switched between 0 and π in the temperature range of 0.1–4.2 K using a suitable control voltage. This is equivalent to the external application of (n+1/2) flux quantum.
Conventional superconducting flux qubits require the application of a precisely tuned magnetic field to set the operation point at half a flux quantum through the qubit loop, which complicates the on-chip integration of this type of device. It has been proposed that by inducing a π-phase shift in the superconducting order parameter using a precisely controlled nanoscale-thickness superconductor/ferromagnet/superconductor Josephson junction, commonly referred to as π-junction, it is possible to realize a flux qubit operating at zero magnetic flux. Here, we report the realization of a zero-flux-biased flux qubit based on three NbN/AlN/NbN Josephson junctions and a NbN/PdNi/NbN ferromagnetic π-junction. The qubit lifetime is in the microsecond range, which we argue is limited by quasiparticle excitations in the metallic ferromagnet layer. Our results pave the way for developing quantum coherent devices, including qubits and sensors, that utilize the interplay between ferromagnetism and superconductivity. Conventional superconducting flux qubits require a finely tuned magnetic field to operate, hindering their on-chip integration. Here, ferromagnetic Josephson junctions with a π-phase shift in the superconducting order parameter allow the realization of a flux qubit operating at zero magnetic field.