Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2607.04393

Atomic oven with rapid thermal response for atom experiments

Weilong Huang, Congjun Zou, Feiyu Dong, Huirong Xiao, Zejian Ren, Shanchao Zhang

physics.atom-phquant-phSubmitted Jul 5, 2026• Announced Jul 7, 2026• 0 citations• Revised Jul 7, 2026 (v2)
v1 · Jul 5, 2026v2 · Jul 7, 2026
arXivHTMLPDF

Abstract

Atomic oven generating controllable atomic beam flux plays a fundamental role in quantum gas experiments. Here, we report a new heater design that can heat up an high temperature atomic oven with fast thermal response. The new heater shows a heating rate improved by 7.65 times comparing to that of the conventional resistive heater while the crucible temperature can heated up to 1200K. With this oven, we generated a collimated ytterbium beam with flux exceeding $10^{14} \text{ atoms/s}$ at 823 K. We believe that our design offers a promising solution for shortening experimental dead time and improve the experiment efficiency in cold atom researches.

Comments
5 pages, 4 figures

Related papers

A short response time atomic source for trapped ion experiments

T. G. Ballance, Joseph F. Goodwin, Robert C. Nichol +3 more

Ion traps are often loaded from atomic beams produced by resistively heated ovens. We demonstrate an atomic oven which has been designed for fast control of the atomic flux density and reproducible construction. We study the limiting time constants of the system and, in tests with 40Ca, show that we can reach the desired level of flux in 12 s, with no overshoot. Our results indicate that it may be possible to achieve an even faster response by applying an appropriate one-off heat treatment to the oven before it is used.

arXiv:1710.02489•Review of Scientific Instruments•May 1, 2018•16 citations

A compact and efficient strontium oven for laser-cooling experiments

M. Schioppo, N. Poli, M. Prevedelli +4 more

Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0 × 10(13) s(-1) cm(-2) at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.

arXiv:1209.5639•Review of Scientific Instruments•Oct 1, 2012•65 citations

Simple oven design for highly reactive metal beam applications

Luis Bañares, Ángel González Ureña

An oven design suitable for producing stable beams of highly reactive metals is reported. Its attraction is in its simplicity, low cost and versatility in molecular beam and atomic/molecular physics experiments involving highly reactive metals such as rubidium, caesium, etc. An application is described for the case of atomic caesium, where the metal is produced by the chemical reaction Ba(s)+CsCl(s) to BaCl(s)+Cs(v). One of the main advantages of the present design is the use of a thin-walled, stainless steel pipe, as crucible and heater simultaneously, which considerably simplifies its design. With respect to the experimental method, the simplicity in the loading, working and cleaning procedures compared with the use of pure metal should be noted.

Journal of Physics E Scientific Instruments•Dec 1, 1989•6 citations

A simple atomic beam oven with a metal thermal break

Chetan Vishwakarma, Jay Mangaonkar, Kushal Patel +3 more

We report the design and construction of a simple, easy to machine high temperature oven for generating an atomic beam in laser cooling experiments. This design eliminates the problem of thermal isolation of the oven region from the rest of the vacuum system without using a glass or ceramic thermal break. This design simplifies the construction and operation of high temperature ovens for elements having low vapor pressure. We demonstrate the functionality of such a source for strontium (Sr) atoms. We generate a high flux of Sr atoms for use in laser cooling and trapping experiments. The optimization of the design of the metal thermal break is done using a finite element analysis.

arXiv:1810.09090•Review of Scientific Instruments•May 1, 2019•7 citations

Atomic flux distribution from a low-divergent dark wall oven

Lakhi Sharma, Atish Roy, Subhasis Panja +1 more

Nearly collimated atomic beam is of interest for a variety of experiments. This article reports a simple way of modifying the atomic beam distribution using a dark wall oven and describes detailed study of outcoming atoms’ spatial distribution. A simple design is obtained by employing the fact that inhomogeneous thermal distribution along a capillary results due to its partial resistive heating. Based on this phenomenon, we have designed a dark wall oven consisting of a reservoir, collimator, and cold absorber at the exit end of atoms, where all three are fabricated out of a single stainless steel capillary. The nearly collimated spatial distribution of the atoms resulting due to the absorber eliminating the atoms diverging above a certain angle is modeled and experimentally verified. A divergence as minimum as 1.2(1)° corresponding to a half angle θ1/2 = 0.9(1)° is measured at an oven temperature of 250 °C that produces an atomic flux of about 8 × 109 atoms s−1. Total flux as estimated using our measured spatial distribution of atoms matches well with the numerically simulated values of it for the dark wall oven.

Review of Scientific Instruments•May 1, 2019•12 citations

A high-flux atomic strontium oven with light-driven flux modulation

Kenneth M. Hughes, J. Schelfhout, Charu Mishra +3 more

A high-flux source of strontium atoms is required for cold atom quantum technology applications. We present a re-entrant oven design that avoids the need for any vacuum feed-throughs and has an inherent temperature gradient to guard against clogging of the nozzle. The nozzle is fabricated by micro-machining of fused silica using selective laser etching; this specialised technique is capable of making many thousands of fine microchannels and is suitable for batch production. Operating with only electrical heating, using <20W of electrical power, a total flux of $8(1)\times 10^{14}$ atoms/s is achieved at an oven temperature of 475°C, of which we estimate $1.8(2)\times 10^{13}$ atoms/s could be captured. A heated in-vacuum sapphire window grants optical access directly opposite the oven, and can be cleared of metallization without breaking vacuum. We used this optical access to modulate the flux of the atomic beam by direct illumination of the nozzle and the strontium metal with high-power laser light. Heating by laser light increased the useful flux by a factor of up to 16(3) on a timescale of 40s, and a factor of 2.5(5) on a timescale of 1s. This flux modulation serves to increase the operating lifetime of the oven. We report experimental measurements of the performance of the oven in long-term operation over many months.

arXiv:2603.25567•Mar 26, 2026•2 citations
Atomic oven generating controllable atomic beam flux plays a fundamental role in quantum gas experiments. Here, we report a new heater design that can heat up an high temperature atomic oven with fast thermal response. The new heater shows a heating rate improved by 7.65 times comparing to that of the conventional resistive heater while the crucible temperature can heated up to 1200K. With this oven, we generated a collimated ytterbium beam with flux exceeding 1014 atoms/s10^{14} \text{ atoms/s}1014 atoms/s at 823 K. We believe that our design offers a promising solution for shortening experimental dead time and improve the experiment efficiency in cold atom researches.
Ion traps are often loaded from atomic beams produced by resistively heated ovens. We demonstrate an atomic oven which has been designed for fast control of the atomic flux density and reproducible construction. We study the limiting time constants of the system and, in tests with 40Ca, show that we can reach the desired level of flux in 12 s, with no overshoot. Our results indicate that it may be possible to achieve an even faster response by applying an appropriate one-off heat treatment to the oven before it is used.
Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0 × 10(13) s(-1) cm(-2) at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.
An oven design suitable for producing stable beams of highly reactive metals is reported. Its attraction is in its simplicity, low cost and versatility in molecular beam and atomic/molecular physics experiments involving highly reactive metals such as rubidium, caesium, etc. An application is described for the case of atomic caesium, where the metal is produced by the chemical reaction Ba(s)+CsCl(s) to BaCl(s)+Cs(v). One of the main advantages of the present design is the use of a thin-walled, stainless steel pipe, as crucible and heater simultaneously, which considerably simplifies its design. With respect to the experimental method, the simplicity in the loading, working and cleaning procedures compared with the use of pure metal should be noted.
We report the design and construction of a simple, easy to machine high temperature oven for generating an atomic beam in laser cooling experiments. This design eliminates the problem of thermal isolation of the oven region from the rest of the vacuum system without using a glass or ceramic thermal break. This design simplifies the construction and operation of high temperature ovens for elements having low vapor pressure. We demonstrate the functionality of such a source for strontium (Sr) atoms. We generate a high flux of Sr atoms for use in laser cooling and trapping experiments. The optimization of the design of the metal thermal break is done using a finite element analysis.
Nearly collimated atomic beam is of interest for a variety of experiments. This article reports a simple way of modifying the atomic beam distribution using a dark wall oven and describes detailed study of outcoming atoms’ spatial distribution. A simple design is obtained by employing the fact that inhomogeneous thermal distribution along a capillary results due to its partial resistive heating. Based on this phenomenon, we have designed a dark wall oven consisting of a reservoir, collimator, and cold absorber at the exit end of atoms, where all three are fabricated out of a single stainless steel capillary. The nearly collimated spatial distribution of the atoms resulting due to the absorber eliminating the atoms diverging above a certain angle is modeled and experimentally verified. A divergence as minimum as 1.2(1)° corresponding to a half angle θ1/2 = 0.9(1)° is measured at an oven temperature of 250 °C that produces an atomic flux of about 8 × 109 atoms s−1. Total flux as estimated using our measured spatial distribution of atoms matches well with the numerically simulated values of it for the dark wall oven.
A high-flux source of strontium atoms is required for cold atom quantum technology applications. We present a re-entrant oven design that avoids the need for any vacuum feed-throughs and has an inherent temperature gradient to guard against clogging of the nozzle. The nozzle is fabricated by micro-machining of fused silica using selective laser etching; this specialised technique is capable of making many thousands of fine microchannels and is suitable for batch production. Operating with only electrical heating, using <20W of electrical power, a total flux of 8(1)×10148(1)\times 10^{14}8(1)×1014 atoms/s is achieved at an oven temperature of 475°C, of which we estimate 1.8(2)×10131.8(2)\times 10^{13}1.8(2)×1013 atoms/s could be captured. A heated in-vacuum sapphire window grants optical access directly opposite the oven, and can be cleared of metallization without breaking vacuum. We used this optical access to modulate the flux of the atomic beam by direct illumination of the nozzle and the strontium metal with high-power laser light. Heating by laser light increased the useful flux by a factor of up to 16(3) on a timescale of 40s, and a factor of 2.5(5) on a timescale of 1s. This flux modulation serves to increase the operating lifetime of the oven. We report experimental measurements of the performance of the oven in long-term operation over many months.