Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1710.02489 · Review of Scientific Instruments

A short response time atomic source for trapped ion experiments

T. G. Ballance, Joseph F. Goodwin, Robert C. Nichol, L. J. Stephenson, Christopher J. Ballance, D. M. Lucas

Published May 1, 2018• 16 citations
arXivHTMLPDF

Abstract

Ion traps are often loaded from atomic beams produced by resistively heated ovens. We demonstrate an atomic oven which has been designed for fast control of the atomic flux density and reproducible construction. We study the limiting time constants of the system and, in tests with 40Ca, show that we can reach the desired level of flux in 12 s, with no overshoot. Our results indicate that it may be possible to achieve an even faster response by applying an appropriate one-off heat treatment to the oven before it is used.

DOI
10.1063/1.5025713

Related papers

An optically heated atomic source for compact ion trap vacuum systems

Shaobo Gao, William J. Hughes, D. M. Lucas +2 more

We present a design for an atomic oven suitable for loading ion traps, which is operated via optical heating with a continuous-wave multimode diode laser. The absence of the low-resistance electrical connections necessary for Joule heating allows the oven to be extremely well thermally isolated from the rest of the vacuum system. Extrapolating from high-flux measurements of an oven filled with calcium, we calculate that a target region number density of 100 cm−3, suitable for rapid ion loading, will be produced with 175(10) mW of heating laser power, limited by radiative losses. With simple feedforward to the laser power, the turn-on time for the oven is 15 s. Our measurements indicate that an oven volume 1000 times smaller could still hold enough source metal for decades of continuous operation.

arXiv:2010.15497•Review of Scientific Instruments•Mar 1, 2021•9 citations

Atomic oven with rapid thermal response for atom experiments

Weilong Huang, Congjun Zou, Feiyu Dong +3 more

Atomic oven generating controllable atomic beam flux plays a fundamental role in quantum gas experiments. Here, we report a new heater design that can heat up an high temperature atomic oven with fast thermal response. The new heater shows a heating rate improved by 7.65 times comparing to that of the conventional resistive heater while the crucible temperature can heated up to 1200K. With this oven, we generated a collimated ytterbium beam with flux exceeding $10^{14} \text{ atoms/s}$ at 823 K. We believe that our design offers a promising solution for shortening experimental dead time and improve the experiment efficiency in cold atom researches.

physics.atom-phCross-listedarXiv:2607.04393•Jul 7, 2026•0 citations

Rapid all-optical loading of trapped ions using a miniaturised atom source

Lorenzo Versini, Tim F. Wohlers-Reichel, Catherine E. J. Challoner +8 more

We characterise an efficient optically-heated neutral atom source for ion trapping. We observe loading rates of up to $24(3)\,\mathrm{s}^{-1}$ with heating powers below $85\,\mathrm{mW}$, and demonstrate loading of a single ion in under $30\,\mathrm{s}$ with $41.4(4)\,\mathrm{mW}$ of optical power in a room-temperature ion trap system with an ionisation probability of $1.50(5)\times10^{-5}$. We calibrate a thermal model for the source's internal temperature by imaging the fluorescence of a collimated flux of neutral calcium that effuses from the oven at various optical heating powers. We show that the thermal performance of this oven is mainly limited by radiative losses. We explore the effect of second-stage photo-ionisation laser power on the loading rate, and identify a path beyond the loading rates reported in this study. We predict that this source is also well-suited to a wide range of metals used in ion-trapping.

physics.atom-phCross-listedarXiv:2512.10514•Physical Review Applied•Dec 12, 2025•0 citations

Low divergence cold-wall oven for loading ion traps

Anand Prakash, Akhil Ayyadevara, E. Krishnakumar +1 more

We present a compact cold-wall oven that is simple to build and align for loading miniature ion traps with calcium ions. The cold-wall oven, which is a metal-loaded capillary heated only through a portion of its length by the passage of a current, is described and characterized. An atomic beam with a low divergence of 14 mrad is produced. We perform Doppler-sensitive, resonant fluorescence measurements on the atomic beam to characterize the oven's performance. The emission of atoms from the oven is seen within ∼70 s after turning on the oven at an electric power consumption of <10 W. The flow rate is measured to be 1.5 ± 0.2 × 109 atoms s-1 at a temperature of 702 ± 7 K. The entire oven assembly is mounted on a CF16 feedthrough. This design can be extended to other species for producing a collimated atomic beam.

Review of Scientific Instruments•Mar 1, 2024•3 citations

A simple atomic beam oven with a metal thermal break

Chetan Vishwakarma, Jay Mangaonkar, Kushal Patel +3 more

We report the design and construction of a simple, easy to machine high temperature oven for generating an atomic beam in laser cooling experiments. This design eliminates the problem of thermal isolation of the oven region from the rest of the vacuum system without using a glass or ceramic thermal break. This design simplifies the construction and operation of high temperature ovens for elements having low vapor pressure. We demonstrate the functionality of such a source for strontium (Sr) atoms. We generate a high flux of Sr atoms for use in laser cooling and trapping experiments. The optimization of the design of the metal thermal break is done using a finite element analysis.

arXiv:1810.09090•Review of Scientific Instruments•May 1, 2019•7 citations

Barium magnesium alloy as source of atomic Ba for ion trapping

Jacob R. Gunnell, Thomas Griffiths, B. B. Blinov

Trapped atomic ion qubits exhibit long coherence times and high fidelity in qubit state preparation, manipulation, and detection, making them well-suited for scalable quantum computing applications. Among several atomic species used in quantum computing and other applications, singly charged ions of barium stand out due to their long wavelength transitions and the presence of very long-lived metastable internal states. However, elemental barium is a highly reactive metal, making it experimentally difficult to work with when making atomic beam sources. In this paper, we demonstrate a method of using resistively heated ovens loaded with a barium magnesium alloy (BaMg) as a source of barium for ion traps. This alloy is not very chemically reactive and does not oxidize in air. We found that a sample of BaMg in a resistively heated oven produced barium vapor pressures on the same order as a metallic barium sample prepared the same way. Two separate ovens, one with a sample of BaMg and one with metallic barium, were used as sources for an ion trap. We observed reliable trapping of 138Ba+ ions both with the elemental barium source and the BaMg source.

arXiv:2603.20956•Review of Scientific Instruments•Aug 1, 2026•0 citations
Ion traps are often loaded from atomic beams produced by resistively heated ovens. We demonstrate an atomic oven which has been designed for fast control of the atomic flux density and reproducible construction. We study the limiting time constants of the system and, in tests with 40Ca, show that we can reach the desired level of flux in 12 s, with no overshoot. Our results indicate that it may be possible to achieve an even faster response by applying an appropriate one-off heat treatment to the oven before it is used.
We present a design for an atomic oven suitable for loading ion traps, which is operated via optical heating with a continuous-wave multimode diode laser. The absence of the low-resistance electrical connections necessary for Joule heating allows the oven to be extremely well thermally isolated from the rest of the vacuum system. Extrapolating from high-flux measurements of an oven filled with calcium, we calculate that a target region number density of 100 cm−3, suitable for rapid ion loading, will be produced with 175(10) mW of heating laser power, limited by radiative losses. With simple feedforward to the laser power, the turn-on time for the oven is 15 s. Our measurements indicate that an oven volume 1000 times smaller could still hold enough source metal for decades of continuous operation.
Atomic oven generating controllable atomic beam flux plays a fundamental role in quantum gas experiments. Here, we report a new heater design that can heat up an high temperature atomic oven with fast thermal response. The new heater shows a heating rate improved by 7.65 times comparing to that of the conventional resistive heater while the crucible temperature can heated up to 1200K. With this oven, we generated a collimated ytterbium beam with flux exceeding 1014 atoms/s10^{14} \text{ atoms/s}1014 atoms/s at 823 K. We believe that our design offers a promising solution for shortening experimental dead time and improve the experiment efficiency in cold atom researches.
We characterise an efficient optically-heated neutral atom source for ion trapping. We observe loading rates of up to 24(3) s−124(3)\,\mathrm{s}^{-1}24(3)s−1 with heating powers below 85 mW85\,\mathrm{mW}85mW, and demonstrate loading of a single ion in under 30 s30\,\mathrm{s}30s with 41.4(4) mW41.4(4)\,\mathrm{mW}41.4(4)mW of optical power in a room-temperature ion trap system with an ionisation probability of 1.50(5)×10−51.50(5)\times10^{-5}1.50(5)×10−5. We calibrate a thermal model for the source's internal temperature by imaging the fluorescence of a collimated flux of neutral calcium that effuses from the oven at various optical heating powers. We show that the thermal performance of this oven is mainly limited by radiative losses. We explore the effect of second-stage photo-ionisation laser power on the loading rate, and identify a path beyond the loading rates reported in this study. We predict that this source is also well-suited to a wide range of metals used in ion-trapping.
We present a compact cold-wall oven that is simple to build and align for loading miniature ion traps with calcium ions. The cold-wall oven, which is a metal-loaded capillary heated only through a portion of its length by the passage of a current, is described and characterized. An atomic beam with a low divergence of 14 mrad is produced. We perform Doppler-sensitive, resonant fluorescence measurements on the atomic beam to characterize the oven's performance. The emission of atoms from the oven is seen within ∼70 s after turning on the oven at an electric power consumption of <10 W. The flow rate is measured to be 1.5 ± 0.2 × 109 atoms s-1 at a temperature of 702 ± 7 K. The entire oven assembly is mounted on a CF16 feedthrough. This design can be extended to other species for producing a collimated atomic beam.
We report the design and construction of a simple, easy to machine high temperature oven for generating an atomic beam in laser cooling experiments. This design eliminates the problem of thermal isolation of the oven region from the rest of the vacuum system without using a glass or ceramic thermal break. This design simplifies the construction and operation of high temperature ovens for elements having low vapor pressure. We demonstrate the functionality of such a source for strontium (Sr) atoms. We generate a high flux of Sr atoms for use in laser cooling and trapping experiments. The optimization of the design of the metal thermal break is done using a finite element analysis.
Trapped atomic ion qubits exhibit long coherence times and high fidelity in qubit state preparation, manipulation, and detection, making them well-suited for scalable quantum computing applications. Among several atomic species used in quantum computing and other applications, singly charged ions of barium stand out due to their long wavelength transitions and the presence of very long-lived metastable internal states. However, elemental barium is a highly reactive metal, making it experimentally difficult to work with when making atomic beam sources. In this paper, we demonstrate a method of using resistively heated ovens loaded with a barium magnesium alloy (BaMg) as a source of barium for ion traps. This alloy is not very chemically reactive and does not oxidize in air. We found that a sample of BaMg in a resistively heated oven produced barium vapor pressures on the same order as a metallic barium sample prepared the same way. Two separate ovens, one with a sample of BaMg and one with metallic barium, were used as sources for an ion trap. We observed reliable trapping of 138Ba+ ions both with the elemental barium source and the BaMg source.