Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

Atomic flux distribution from a low-divergent dark wall oven

Lakhi Sharma, Atish Roy, Subhasis Panja, Subhadeep De

Published May 1, 2019• 12 citations
Publisher

Abstract

Nearly collimated atomic beam is of interest for a variety of experiments. This article reports a simple way of modifying the atomic beam distribution using a dark wall oven and describes detailed study of outcoming atoms’ spatial distribution. A simple design is obtained by employing the fact that inhomogeneous thermal distribution along a capillary results due to its partial resistive heating. Based on this phenomenon, we have designed a dark wall oven consisting of a reservoir, collimator, and cold absorber at the exit end of atoms, where all three are fabricated out of a single stainless steel capillary. The nearly collimated spatial distribution of the atoms resulting due to the absorber eliminating the atoms diverging above a certain angle is modeled and experimentally verified. A divergence as minimum as 1.2(1)° corresponding to a half angle θ1/2 = 0.9(1)° is measured at an oven temperature of 250 °C that produces an atomic flux of about 8 × 109 atoms s−1. Total flux as estimated using our measured spatial distribution of atoms matches well with the numerically simulated values of it for the dark wall oven.

DOI
10.1063/1.5090199

Related papers

Low divergence cold-wall oven for loading ion traps

Anand Prakash, Akhil Ayyadevara, E. Krishnakumar +1 more

We present a compact cold-wall oven that is simple to build and align for loading miniature ion traps with calcium ions. The cold-wall oven, which is a metal-loaded capillary heated only through a portion of its length by the passage of a current, is described and characterized. An atomic beam with a low divergence of 14 mrad is produced. We perform Doppler-sensitive, resonant fluorescence measurements on the atomic beam to characterize the oven's performance. The emission of atoms from the oven is seen within ∼70 s after turning on the oven at an electric power consumption of <10 W. The flow rate is measured to be 1.5 ± 0.2 × 109 atoms s-1 at a temperature of 702 ± 7 K. The entire oven assembly is mounted on a CF16 feedthrough. This design can be extended to other species for producing a collimated atomic beam.

Review of Scientific Instruments•Mar 1, 2024•3 citations

A compact and efficient strontium oven for laser-cooling experiments

M. Schioppo, N. Poli, M. Prevedelli +4 more

Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0 × 10(13) s(-1) cm(-2) at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.

arXiv:1209.5639•Review of Scientific Instruments•Oct 1, 2012•65 citations

Atomic oven with rapid thermal response for atom experiments

Weilong Huang, Congjun Zou, Feiyu Dong +3 more

Atomic oven generating controllable atomic beam flux plays a fundamental role in quantum gas experiments. Here, we report a new heater design that can heat up an high temperature atomic oven with fast thermal response. The new heater shows a heating rate improved by 7.65 times comparing to that of the conventional resistive heater while the crucible temperature can heated up to 1200K. With this oven, we generated a collimated ytterbium beam with flux exceeding $10^{14} \text{ atoms/s}$ at 823 K. We believe that our design offers a promising solution for shortening experimental dead time and improve the experiment efficiency in cold atom researches.

physics.atom-phCross-listedarXiv:2607.04393•Jul 7, 2026•0 citations

A new design of a compact strontium cold-atom source

Dongyang Xu

A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.

•Jan 1, 2020•0 citations

Effusive atomic oven nozzle design using an aligned microcapillary array

Ruwan Senaratne, S. Rajagopal, Zachary A. Geiger +3 more

We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design, we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525 °C, the collimated atomic beam flux directly after the nozzle is 1.2 × 10(14) atoms/s with a peak beam intensity greater than 5.0 × 10(16) atoms/s/sr. This suggests an oven lifetime of several decades of continuous operation.

arXiv:1407.6391•Review of Scientific Instruments•Feb 1, 2015•48 citations

Effusive Atomic Oven Nozzle Design Using a Microcapillary Array

Ruwan Senaratne, S. Rajagopal, Zachary A. Geiger +3 more

We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525$^{\circ}$C the collimated atomic beam flux directly after the nozzle is $1.2 \times 10^{14}$ atoms per second with a peak beam intensity greater than $5.0 \times 10^{16}$ atoms per second per steradian. This suggests an oven lifetime of several decades of continuous operation.

•Jul 23, 2014•1 citation
Nearly collimated atomic beam is of interest for a variety of experiments. This article reports a simple way of modifying the atomic beam distribution using a dark wall oven and describes detailed study of outcoming atoms’ spatial distribution. A simple design is obtained by employing the fact that inhomogeneous thermal distribution along a capillary results due to its partial resistive heating. Based on this phenomenon, we have designed a dark wall oven consisting of a reservoir, collimator, and cold absorber at the exit end of atoms, where all three are fabricated out of a single stainless steel capillary. The nearly collimated spatial distribution of the atoms resulting due to the absorber eliminating the atoms diverging above a certain angle is modeled and experimentally verified. A divergence as minimum as 1.2(1)° corresponding to a half angle θ1/2 = 0.9(1)° is measured at an oven temperature of 250 °C that produces an atomic flux of about 8 × 109 atoms s−1. Total flux as estimated using our measured spatial distribution of atoms matches well with the numerically simulated values of it for the dark wall oven.
We present a compact cold-wall oven that is simple to build and align for loading miniature ion traps with calcium ions. The cold-wall oven, which is a metal-loaded capillary heated only through a portion of its length by the passage of a current, is described and characterized. An atomic beam with a low divergence of 14 mrad is produced. We perform Doppler-sensitive, resonant fluorescence measurements on the atomic beam to characterize the oven's performance. The emission of atoms from the oven is seen within ∼70 s after turning on the oven at an electric power consumption of <10 W. The flow rate is measured to be 1.5 ± 0.2 × 109 atoms s-1 at a temperature of 702 ± 7 K. The entire oven assembly is mounted on a CF16 feedthrough. This design can be extended to other species for producing a collimated atomic beam.
Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0 × 10(13) s(-1) cm(-2) at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.
Atomic oven generating controllable atomic beam flux plays a fundamental role in quantum gas experiments. Here, we report a new heater design that can heat up an high temperature atomic oven with fast thermal response. The new heater shows a heating rate improved by 7.65 times comparing to that of the conventional resistive heater while the crucible temperature can heated up to 1200K. With this oven, we generated a collimated ytterbium beam with flux exceeding 1014 atoms/s10^{14} \text{ atoms/s}1014 atoms/s at 823 K. We believe that our design offers a promising solution for shortening experimental dead time and improve the experiment efficiency in cold atom researches.
A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.
We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design, we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525 °C, the collimated atomic beam flux directly after the nozzle is 1.2 × 10(14) atoms/s with a peak beam intensity greater than 5.0 × 10(16) atoms/s/sr. This suggests an oven lifetime of several decades of continuous operation.
We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525∘^{\circ}∘C the collimated atomic beam flux directly after the nozzle is 1.2×10141.2 \times 10^{14}1.2×1014 atoms per second with a peak beam intensity greater than 5.0×10165.0 \times 10^{16}5.0×1016 atoms per second per steradian. This suggests an oven lifetime of several decades of continuous operation.