Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1810.09090 · Review of Scientific Instruments

A simple atomic beam oven with a metal thermal break

Chetan Vishwakarma, Jay Mangaonkar, Kushal Patel, Gunjan Verma, Sumit Sarkar, Umakant D. Rapol

Published May 1, 2019• 7 citations
arXivHTMLPDF

Abstract

We report the design and construction of a simple, easy to machine high temperature oven for generating an atomic beam in laser cooling experiments. This design eliminates the problem of thermal isolation of the oven region from the rest of the vacuum system without using a glass or ceramic thermal break. This design simplifies the construction and operation of high temperature ovens for elements having low vapor pressure. We demonstrate the functionality of such a source for strontium (Sr) atoms. We generate a high flux of Sr atoms for use in laser cooling and trapping experiments. The optimization of the design of the metal thermal break is done using a finite element analysis.

DOI
10.1063/1.5067306

Related papers

An optically heated atomic source for compact ion trap vacuum systems

Shaobo Gao, William J. Hughes, D. M. Lucas +2 more

We present a design for an atomic oven suitable for loading ion traps, which is operated via optical heating with a continuous-wave multimode diode laser. The absence of the low-resistance electrical connections necessary for Joule heating allows the oven to be extremely well thermally isolated from the rest of the vacuum system. Extrapolating from high-flux measurements of an oven filled with calcium, we calculate that a target region number density of 100 cm−3, suitable for rapid ion loading, will be produced with 175(10) mW of heating laser power, limited by radiative losses. With simple feedforward to the laser power, the turn-on time for the oven is 15 s. Our measurements indicate that an oven volume 1000 times smaller could still hold enough source metal for decades of continuous operation.

arXiv:2010.15497•Review of Scientific Instruments•Mar 1, 2021•9 citations

A compact and efficient strontium oven for laser-cooling experiments

M. Schioppo, N. Poli, M. Prevedelli +4 more

Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0 × 10(13) s(-1) cm(-2) at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.

arXiv:1209.5639•Review of Scientific Instruments•Oct 1, 2012•65 citations

A high-flux atomic strontium oven with light-driven flux modulation

Kenneth M. Hughes, J. Schelfhout, Charu Mishra +3 more

A high-flux source of strontium atoms is required for cold atom quantum technology applications. We present a re-entrant oven design that avoids the need for any vacuum feed-throughs and has an inherent temperature gradient to guard against clogging of the nozzle. The nozzle is fabricated by micro-machining of fused silica using selective laser etching; this specialised technique is capable of making many thousands of fine microchannels and is suitable for batch production. Operating with only electrical heating, using <20W of electrical power, a total flux of $8(1)\times 10^{14}$ atoms/s is achieved at an oven temperature of 475°C, of which we estimate $1.8(2)\times 10^{13}$ atoms/s could be captured. A heated in-vacuum sapphire window grants optical access directly opposite the oven, and can be cleared of metallization without breaking vacuum. We used this optical access to modulate the flux of the atomic beam by direct illumination of the nozzle and the strontium metal with high-power laser light. Heating by laser light increased the useful flux by a factor of up to 16(3) on a timescale of 40s, and a factor of 2.5(5) on a timescale of 1s. This flux modulation serves to increase the operating lifetime of the oven. We report experimental measurements of the performance of the oven in long-term operation over many months.

arXiv:2603.25567•Mar 26, 2026•2 citations

A compact ultracold strontium experiment

Mathieu Bertrand, Torben Pöpplau, Lucas Béguin +2 more

We describe a compact and simplified experimental setup for the production of ultracold strontium atoms. Thanks to its low-power oven and coil-free Zeeman slower design, the vacuum system has an overall length of only 40cm including oven, Zeeman slower and all-glass science cell. The oven has a power consumption of 14W at 460°C and produces a collimated flux of 3 10^10at/(s cm^2) at this temperature. The laser system employs master-slave laser architecture throughout and requires neither second-harmonic generation nor tapered amplifiers, reducing cost and complexity. The system has been in continuous use for more than a year.

physics.atom-phCross-listedarXiv:2610.29540•Oct 22, 2026•0 citations

A new design of a compact strontium cold-atom source

Dongyang Xu

A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.

•Jan 1, 2020•0 citations

Atomic oven with rapid thermal response for atom experiments

Weilong Huang, Congjun Zou, Feiyu Dong +3 more

Atomic oven generating controllable atomic beam flux plays a fundamental role in quantum gas experiments. Here, we report a new heater design that can heat up an high temperature atomic oven with fast thermal response. The new heater shows a heating rate improved by 7.65 times comparing to that of the conventional resistive heater while the crucible temperature can heated up to 1200K. With this oven, we generated a collimated ytterbium beam with flux exceeding $10^{14} \text{ atoms/s}$ at 823 K. We believe that our design offers a promising solution for shortening experimental dead time and improve the experiment efficiency in cold atom researches.

physics.atom-phCross-listedarXiv:2607.04393•Jul 7, 2026•0 citations
We report the design and construction of a simple, easy to machine high temperature oven for generating an atomic beam in laser cooling experiments. This design eliminates the problem of thermal isolation of the oven region from the rest of the vacuum system without using a glass or ceramic thermal break. This design simplifies the construction and operation of high temperature ovens for elements having low vapor pressure. We demonstrate the functionality of such a source for strontium (Sr) atoms. We generate a high flux of Sr atoms for use in laser cooling and trapping experiments. The optimization of the design of the metal thermal break is done using a finite element analysis.
We present a design for an atomic oven suitable for loading ion traps, which is operated via optical heating with a continuous-wave multimode diode laser. The absence of the low-resistance electrical connections necessary for Joule heating allows the oven to be extremely well thermally isolated from the rest of the vacuum system. Extrapolating from high-flux measurements of an oven filled with calcium, we calculate that a target region number density of 100 cm−3, suitable for rapid ion loading, will be produced with 175(10) mW of heating laser power, limited by radiative losses. With simple feedforward to the laser power, the turn-on time for the oven is 15 s. Our measurements indicate that an oven volume 1000 times smaller could still hold enough source metal for decades of continuous operation.
Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0 × 10(13) s(-1) cm(-2) at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.
A high-flux source of strontium atoms is required for cold atom quantum technology applications. We present a re-entrant oven design that avoids the need for any vacuum feed-throughs and has an inherent temperature gradient to guard against clogging of the nozzle. The nozzle is fabricated by micro-machining of fused silica using selective laser etching; this specialised technique is capable of making many thousands of fine microchannels and is suitable for batch production. Operating with only electrical heating, using <20W of electrical power, a total flux of 8(1)×10148(1)\times 10^{14}8(1)×1014 atoms/s is achieved at an oven temperature of 475°C, of which we estimate 1.8(2)×10131.8(2)\times 10^{13}1.8(2)×1013 atoms/s could be captured. A heated in-vacuum sapphire window grants optical access directly opposite the oven, and can be cleared of metallization without breaking vacuum. We used this optical access to modulate the flux of the atomic beam by direct illumination of the nozzle and the strontium metal with high-power laser light. Heating by laser light increased the useful flux by a factor of up to 16(3) on a timescale of 40s, and a factor of 2.5(5) on a timescale of 1s. This flux modulation serves to increase the operating lifetime of the oven. We report experimental measurements of the performance of the oven in long-term operation over many months.
We describe a compact and simplified experimental setup for the production of ultracold strontium atoms. Thanks to its low-power oven and coil-free Zeeman slower design, the vacuum system has an overall length of only 40cm including oven, Zeeman slower and all-glass science cell. The oven has a power consumption of 14W at 460°C and produces a collimated flux of 3 10^10at/(s cm^2) at this temperature. The laser system employs master-slave laser architecture throughout and requires neither second-harmonic generation nor tapered amplifiers, reducing cost and complexity. The system has been in continuous use for more than a year.
A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.
Atomic oven generating controllable atomic beam flux plays a fundamental role in quantum gas experiments. Here, we report a new heater design that can heat up an high temperature atomic oven with fast thermal response. The new heater shows a heating rate improved by 7.65 times comparing to that of the conventional resistive heater while the crucible temperature can heated up to 1200K. With this oven, we generated a collimated ytterbium beam with flux exceeding 1014 atoms/s10^{14} \text{ atoms/s}1014 atoms/s at 823 K. We believe that our design offers a promising solution for shortening experimental dead time and improve the experiment efficiency in cold atom researches.