Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A Wideband RF and Wideband IF DSB SIS Mixer

Igor Lapkin, Victor Y. Belitsky, Alexey Pavolotsky, Cristian Daniel López, Denis Meledin, Erik Sundin, Mohamed Aniss Mebarki, Leif Helldner, Magnus Strandberg, Mathias Fredrixon, Sven-Erik Ferm, Vincent Desmaris

Published Jan 1, 2024• 0 citations
OpenAlex

Abstract

The ALMA 2030 Roadmap document calls for a new generation of receivers for ALMA. Such Wideband Sensitivity Upgrade, WSU, aims to improve the existing receiver bands of ALMA with prospectively 4-times wider IF bandwidth and possibly a wider RF bandwidth. In order to explore a possibility to make wideband RF and simultaneously wideband IF receiver, we constructed and built a DSB SIS mixer covering the RF band 210-380 GHz. The mixer exhibits a 4 – 20 GHz IF band and produces non-corrected nose temperature between 3hf/k and 4 hf/k averaged over the IF band.

Related papers

Analysing the RF & IF bandwidth performances of ALMA Band-9 superconducting mixers for wideband sensitivity upgrade

Boon-Kok Tan, J-H Kim, Christine Chaumont +2 more

Abstract The Atacama Large Millimetre/Sub-millimetre Array (ALMA) wideband sensitivity upgrade (WSU) project marks the next milestone in the development of millimetre (mm) and sub-mm astronomy. In this paper, we present the design, optimisation, and performance analysis of the ALMA Band-9 superconductor-insulator-superconductor (SIS) mixer for applications in the upcoming WSU programme, and other high-frequency astronomical observations. The mixers feature a niobium radial-rectangular probe antenna integrated with a silicon-on-insulator (SOI) substrate, which ensures minimal RF power leakage and optimised power coupling. We base our mixer design on conventional aluminium oxide (AlO x ) tunnel junction technology, with a critical current density of about 10 kA cm−2. We explore the impact of different junction sizes on the radio frequency (RF) and intermediate frequency (IF) bandwidths. We demonstrate that the new mixer design is capable of meeting the more stringent sensitivity-bandwidth requirements of the ALMA-WSU programme over the original Band-9 frequency range (602–720 GHz), as the IF bandwidth performance reaches up to 20 GHz. The IF bandwidth improvement is approximately double that of the current existing ALMA Band-9 mixers. These results suggest that our mixer designs provide a promising solution for future ALMA upgrades and other high-frequency applications requiring broad RF and IF bandwidth.

Superconductor Science and Technology•Jul 28, 2025•1 citation

The ALMA Band 6v2 Pre-Production Receiver

A. Navarrini, Joseph. G. Lambert, Philip Dindo +19 more

We present the design and performance of the ALMA Band 6v2 receiver, developed at NRAO as part of the Wideband Sensitivity Upgrade (WSU). The upgraded sideband-separating (2SB) superconductor-insulator-superconductor (SIS) receiver extends the radio frequency (RF) coverage to 209–281 GHz and expands the high-sensitivity intermediate frequency (IF) bandwidth per sideband per polarization from the 4 GHz (6–10 GHz) of the Band 6v1 receiver to 15 GHz (3.5–18.5 GHz). To meet the stringent WSU requirements—which include a single sideband receiver noise temperature Trec,SSB15 dB over 90% of the IF range—the receiver employs improved cryogenic optics, highly balanced 2SB mixer assemblies, and a new low-noise local oscillator system. The 2SB mixer assemblies are based on SIS mixers fabricated on a 5-μm thick silicon-on-insulator (SOI) membrane, employing a two junction series array of Nb/Al-AlOx/Nb junctions. Laboratory measurements demonstrate compliance with the Band 6v2 receiver requirements.

IEEE Transactions on Terahertz Science and Technology•Jan 1, 2026•0 citations

Band-combining SIS mixer designs across 150-400 GHz

J-H Kim, F Boussaha, C Chaumont +2 more

We present the designs of single-ended double sideband (DSB) superconductor-insulator-superconductor (SIS) mixers with broad radio frequency (RF) bandwidths combining Atacama Large Millimeter/sub-millimeter Array (ALMA) bands 5 plus 6 (163-273 GHz), and bands 6 plus 7 (211-373 GHz). We include both end-loaded stub and twin junction tuning methods to produce a suite of streamlined DSB mixer aiming for future applications such as sideband separating receivers. The designs feature silicon-on-insulator (SOI) substrates and gold beam leads. To broaden the intermediate frequency (IF) bandwidth, we incorporate IF matching circuits with external printed circuit boards (PCBs). Preliminary results from the fabrication and assembly process will follow a detailed analysis of the design.

•Jan 1, 2025•0 citations

Design Of Dual Polarisation Sideband Separation Mixer For ALMA Band 5

Bhushan Billade

This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.

•Sep 1, 2009•1 citation

A Fixed-Tuned SIS Mixer with Ultra-Wide-Band IF and Quantum-Limited Sensitivity for ALMA Band 3 (84-116 GHz) Receivers

S.-K. Pan, Anthony R. Kerr, M.W. Pospieszalski +13 more

Abstract- This paper describes an 84-116 GHz Nb/Al-oxide/Nb SIS mixer with multi-octave IF bandwidth and quantum-limited sensitivity. The mixer can be integrated with a three-stage 4-12 GHz HFET preamplifier or fitted with a coaxial connector for operation with an external isolator and IF amplifier. An 84-116 GHz receiver using the mixer with an integrated 4-12 GHz HFET preamplifier has a double sideband noise temperature of 16-20 K ( 3 to 4 h</kB) over most of the IF band. Analysis of the mixer-preamp using Tucker=s theory shows good agreement with measurements. The mixer is easy to build and is being used as a building block for the Band 3 sideband-separating receivers for the Atacama Large Millimeter Array (ALMA)**. With minor modifications, this mixer design can be scaled to other ALMA bands. I

•Jan 1, 2004•23 citations

A sensitive ALMA Band 10 SIS receiver engineering model

Yoshinori Uzawa, M. Kroug, Takafumi Kojima +7 more

We have developed a single polarization engineering model of the Atacama Large Millimeter/Submillimeter Array (ALMA) Band 10 (0.78–0.95 THz) receivers. The front-end optics comprises a pair of ellipsoidal mirrors and a corrugated feed horn. A waveguide mixer block is attached to the feed horn in which an NbTiN-based superconductor–insulator–superconductor (SIS) mixer chip, which uses a quartz substrate, is mounted onto a WR-1.2 full-height waveguide. The SIS mixer employs two Nb / AlO x / Nb junctions and an NbTiN/SiO 2 /Al microstrip tuning circuit. A very wide intermediate frequency (IF) system with a bandwidth of 4–12 GHz is employed. The receiver demonstrated double-sideband (DSB) noise temperatures of below 240 K at local oscillator (LO) frequencies ranging from 792 to 945 GHz, without any correction for loss in front of the receiver. The lowest DSB receiver noise temperature, 179 K, was obtained at the center frequency of the designed band, which corresponds to about 4 quanta. These results represent state-of-the-art sensitivity for a receiver at an operating physical temperature of 4 K.

Superconductor Science and Technology•Oct 19, 2009•22 citations
The ALMA 2030 Roadmap document calls for a new generation of receivers for ALMA. Such Wideband Sensitivity Upgrade, WSU, aims to improve the existing receiver bands of ALMA with prospectively 4-times wider IF bandwidth and possibly a wider RF bandwidth. In order to explore a possibility to make wideband RF and simultaneously wideband IF receiver, we constructed and built a DSB SIS mixer covering the RF band 210-380 GHz. The mixer exhibits a 4 – 20 GHz IF band and produces non-corrected nose temperature between 3hf/k and 4 hf/k averaged over the IF band.
Abstract The Atacama Large Millimetre/Sub-millimetre Array (ALMA) wideband sensitivity upgrade (WSU) project marks the next milestone in the development of millimetre (mm) and sub-mm astronomy. In this paper, we present the design, optimisation, and performance analysis of the ALMA Band-9 superconductor-insulator-superconductor (SIS) mixer for applications in the upcoming WSU programme, and other high-frequency astronomical observations. The mixers feature a niobium radial-rectangular probe antenna integrated with a silicon-on-insulator (SOI) substrate, which ensures minimal RF power leakage and optimised power coupling. We base our mixer design on conventional aluminium oxide (AlO x ) tunnel junction technology, with a critical current density of about 10 kA cm−2. We explore the impact of different junction sizes on the radio frequency (RF) and intermediate frequency (IF) bandwidths. We demonstrate that the new mixer design is capable of meeting the more stringent sensitivity-bandwidth requirements of the ALMA-WSU programme over the original Band-9 frequency range (602–720 GHz), as the IF bandwidth performance reaches up to 20 GHz. The IF bandwidth improvement is approximately double that of the current existing ALMA Band-9 mixers. These results suggest that our mixer designs provide a promising solution for future ALMA upgrades and other high-frequency applications requiring broad RF and IF bandwidth.
We present the design and performance of the ALMA Band 6v2 receiver, developed at NRAO as part of the Wideband Sensitivity Upgrade (WSU). The upgraded sideband-separating (2SB) superconductor-insulator-superconductor (SIS) receiver extends the radio frequency (RF) coverage to 209–281 GHz and expands the high-sensitivity intermediate frequency (IF) bandwidth per sideband per polarization from the 4 GHz (6–10 GHz) of the Band 6v1 receiver to 15 GHz (3.5–18.5 GHz). To meet the stringent WSU requirements—which include a single sideband receiver noise temperature Trec,SSB15 dB over 90% of the IF range—the receiver employs improved cryogenic optics, highly balanced 2SB mixer assemblies, and a new low-noise local oscillator system. The 2SB mixer assemblies are based on SIS mixers fabricated on a 5-μm thick silicon-on-insulator (SOI) membrane, employing a two junction series array of Nb/Al-AlOx/Nb junctions. Laboratory measurements demonstrate compliance with the Band 6v2 receiver requirements.
We present the designs of single-ended double sideband (DSB) superconductor-insulator-superconductor (SIS) mixers with broad radio frequency (RF) bandwidths combining Atacama Large Millimeter/sub-millimeter Array (ALMA) bands 5 plus 6 (163-273 GHz), and bands 6 plus 7 (211-373 GHz). We include both end-loaded stub and twin junction tuning methods to produce a suite of streamlined DSB mixer aiming for future applications such as sideband separating receivers. The designs feature silicon-on-insulator (SOI) substrates and gold beam leads. To broaden the intermediate frequency (IF) bandwidth, we incorporate IF matching circuits with external printed circuit boards (PCBs). Preliminary results from the fabrication and assembly process will follow a detailed analysis of the design.
This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.
Abstract- This paper describes an 84-116 GHz Nb/Al-oxide/Nb SIS mixer with multi-octave IF bandwidth and quantum-limited sensitivity. The mixer can be integrated with a three-stage 4-12 GHz HFET preamplifier or fitted with a coaxial connector for operation with an external isolator and IF amplifier. An 84-116 GHz receiver using the mixer with an integrated 4-12 GHz HFET preamplifier has a double sideband noise temperature of 16-20 K ( 3 to 4 h</kB) over most of the IF band. Analysis of the mixer-preamp using Tucker=s theory shows good agreement with measurements. The mixer is easy to build and is being used as a building block for the Band 3 sideband-separating receivers for the Atacama Large Millimeter Array (ALMA)**. With minor modifications, this mixer design can be scaled to other ALMA bands. I
We have developed a single polarization engineering model of the Atacama Large Millimeter/Submillimeter Array (ALMA) Band 10 (0.78–0.95 THz) receivers. The front-end optics comprises a pair of ellipsoidal mirrors and a corrugated feed horn. A waveguide mixer block is attached to the feed horn in which an NbTiN-based superconductor–insulator–superconductor (SIS) mixer chip, which uses a quartz substrate, is mounted onto a WR-1.2 full-height waveguide. The SIS mixer employs two Nb / AlO x / Nb junctions and an NbTiN/SiO 2 /Al microstrip tuning circuit. A very wide intermediate frequency (IF) system with a bandwidth of 4–12 GHz is employed. The receiver demonstrated double-sideband (DSB) noise temperatures of below 240 K at local oscillator (LO) frequencies ranging from 792 to 945 GHz, without any correction for loss in front of the receiver. The lowest DSB receiver noise temperature, 179 K, was obtained at the center frequency of the designed band, which corresponds to about 4 quanta. These results represent state-of-the-art sensitivity for a receiver at an operating physical temperature of 4 K.