Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Analysing the RF & IF bandwidth performances of ALMA Band-9 superconducting mixers for wideband sensitivity upgrade

Boon-Kok Tan, J-H Kim, Christine Chaumont, Faouzi M. Boussaha, Andrey M. Baryshev

Published Jul 28, 2025• 1 citation
Publisher

Abstract

Abstract The Atacama Large Millimetre/Sub-millimetre Array (ALMA) wideband sensitivity upgrade (WSU) project marks the next milestone in the development of millimetre (mm) and sub-mm astronomy. In this paper, we present the design, optimisation, and performance analysis of the ALMA Band-9 superconductor-insulator-superconductor (SIS) mixer for applications in the upcoming WSU programme, and other high-frequency astronomical observations. The mixers feature a niobium radial-rectangular probe antenna integrated with a silicon-on-insulator (SOI) substrate, which ensures minimal RF power leakage and optimised power coupling. We base our mixer design on conventional aluminium oxide (AlO x ) tunnel junction technology, with a critical current density of about 10 kA cm−2. We explore the impact of different junction sizes on the radio frequency (RF) and intermediate frequency (IF) bandwidths. We demonstrate that the new mixer design is capable of meeting the more stringent sensitivity-bandwidth requirements of the ALMA-WSU programme over the original Band-9 frequency range (602–720 GHz), as the IF bandwidth performance reaches up to 20 GHz. The IF bandwidth improvement is approximately double that of the current existing ALMA Band-9 mixers. These results suggest that our mixer designs provide a promising solution for future ALMA upgrades and other high-frequency applications requiring broad RF and IF bandwidth.

DOI
10.1088/1361-6668/adea63

Related papers

The ALMA Band 6v2 Pre-Production Receiver

A. Navarrini, Joseph. G. Lambert, Philip Dindo +19 more

We present the design and performance of the ALMA Band 6v2 receiver, developed at NRAO as part of the Wideband Sensitivity Upgrade (WSU). The upgraded sideband-separating (2SB) superconductor-insulator-superconductor (SIS) receiver extends the radio frequency (RF) coverage to 209–281 GHz and expands the high-sensitivity intermediate frequency (IF) bandwidth per sideband per polarization from the 4 GHz (6–10 GHz) of the Band 6v1 receiver to 15 GHz (3.5–18.5 GHz). To meet the stringent WSU requirements—which include a single sideband receiver noise temperature Trec,SSB15 dB over 90% of the IF range—the receiver employs improved cryogenic optics, highly balanced 2SB mixer assemblies, and a new low-noise local oscillator system. The 2SB mixer assemblies are based on SIS mixers fabricated on a 5-μm thick silicon-on-insulator (SOI) membrane, employing a two junction series array of Nb/Al-AlOx/Nb junctions. Laboratory measurements demonstrate compliance with the Band 6v2 receiver requirements.

IEEE Transactions on Terahertz Science and Technology•Jan 1, 2026•0 citations

Analyzing and improving the IF bandwidth performance for 345 GHz SIS mixer

Chen Peng, Boxun Wang, Liping Zuo +5 more

Abstract The wide intermediate frequency (IF) bandwidth is a core performance metric for terahertz heterodyne receivers, and a wide-IF superconductor–insulator–superconductor (SIS) mixer is key to achieving this. This paper presents the simulation-based design, optimization, and performance analysis of a 345 GHz superconducting SIS mixer developed for wide-IF applications. The mixer employs a parallel-connected twin-junction tuning structure and integrates a dedicated IF impedance matching circuit, achieving wideband impedance matching between the mixer output port and low-noise amplifier. The design is based on two tunnel junction technologies, AlO x and AlN, with critical current densities of 1 kA·cm −2 and 25 kA·cm −2 , respectively. We systematically studied the effects of different junction materials and junction areas on the RF and IF bandwidth performance of the SIS mixer. It is found that for AlN-barrier junctions with diameters of 0.6 μ m and 0.8 μ m, the receiver’s IF noise temperature slowly decreased as the IF frequency increased at a high local oscillator frequency. Furthermore, we incorporated the calculated IF output port impedance into the mixer model for correction and introduced an integrated IF circuit approach, overcoming the original IF bandwidth limitation. Simulations show that the newly designed mixer achieves the stringent sensitivity and bandwidth requirements across the 320–370 GHz range, delivering an IF bandwidth of 4–22 GHz and a receiver noise temperature of 39–73 K. Notably, the −3 dB IF bandwidth is improved by more than 1.5 times compared to conventional AlO x -based designs. These findings provide new design guidelines and quantitative criteria for next-generation wide-IF receivers and other high-frequency applications requiring a wide IF bandwidth.

Journal of Physics D Applied Physics•Oct 6, 2026•0 citations

Design and Development of SIS Mixers for ALMA Band 10

Wenlei Shan, Sheng‐Cai Shi, T. Matsunaga +4 more

We present the design and preliminary experimental results of superconductor-insulator-superconductor (SIS) mixers for Atacama large millimeter array (ALMA) band 10 (780-950GHz) receivers. To achieve wide frequency coverage as well as low noise temperature, we integrated high current density (10 kA/cm2) and small-sized (one micrometer in diameter) Nb/AlOx/Nb SIS junctions with a tuning microstrip line using NbTiN ground plane and Al wiring layers. High quality NbTiN films with Tc reaching 14.5 K and Al films with residual resistivity ratio as large as 15 have been achieved. To minimize the waveguide transmission loss and facilitate the fabrication of mixer block, a full height waveguide was adopted. The waveguide probe was optimized to achieve low input impedance in the frequency range of 780-950 GHz while adopting a backshort cavity of zero depth. Preliminary RF testing with a Nb/Al microstrip tuning circuit demonstrated a DSB receiver noise temperature about 400 K at 832.5 GHz, which promises the accommodation of receiver performance in ALMA specification with low loss NbTiN/Al microstrip lines.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•40 citations

Design and Development of SIS Mixers for ALMA Band 8

Wenlei Shan, Takashi Noguchi, S. C. Shi +1 more

In this paper, we report on the design and experimental results of a fix-tuned Superconductor-Insulator-Superconductor (SIS) mixer for Atacama Large Millimeter/submillimeter Array (ALMA) band 8 (385-500 GHz) receivers. Nb-based SIS junctions of a current density of 10 kA/cm/sup 2/ and one micrometer size (fabricated with a two-step lift-off process) are employed to accomplish the ALMA receiver specification, which requires wide frequency coverage as well as low noise temperature. Parallel-connected twin junctions (PCTJ) are designed to resonate at the band center to tune out the junction geometric capacitance. A waveguide-microstrip probe is optimized to have nearly frequency-independent impedance at the probe's feed point, thereby making it much easier to match the low-impedance PCTJ over a wide frequency band. In addition, a superconducting magnet fixed onto the compact mixer block to provide efficient magnetic field coupling is designed. The SIS mixer demonstrates a minimum double-sideband receiver noise temperature of 108 K at the band center and temperatures of less than 167 K over the whole band (for an intermediate-frequency range of 4-8 GHz).

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•27 citations

Band-combining SIS mixer designs across 150-400 GHz

J-H Kim, F Boussaha, C Chaumont +2 more

We present the designs of single-ended double sideband (DSB) superconductor-insulator-superconductor (SIS) mixers with broad radio frequency (RF) bandwidths combining Atacama Large Millimeter/sub-millimeter Array (ALMA) bands 5 plus 6 (163-273 GHz), and bands 6 plus 7 (211-373 GHz). We include both end-loaded stub and twin junction tuning methods to produce a suite of streamlined DSB mixer aiming for future applications such as sideband separating receivers. The designs feature silicon-on-insulator (SOI) substrates and gold beam leads. To broaden the intermediate frequency (IF) bandwidth, we incorporate IF matching circuits with external printed circuit boards (PCBs). Preliminary results from the fabrication and assembly process will follow a detailed analysis of the design.

•Jan 1, 2025•0 citations

Development of Superconducting Devices Supporting Radio Astronomy

Yoshinori Uzawa, M. Kroug, Takafumi Kojima +7 more

This paper describes the development of superconductor-insulator-superconductor (SIS) mixers for the Atacama Large Millimeter/submillimeter Array (ALMA) from the device point of view. During the construction phase of ALMA, the National Astronomical Observatory of Japan (NAOJ) successfully fabricated SIS mixers to meet the stringent ALMA noise temperature requirements of less than 230 K (5 times the quantum noise) for Band 10 (787-950 GHz) in collaboration with the National Institute of Information and Communications Technology. Band 10 covers the highest frequency band of ALMA and is recognized as the most difficult band in terms of superconducting technology. After the construction, the NAOJ began development studies for ALMA enhancement such as wideband and multibeam SIS mixers according to top-level science requirements, which are also presented.

IEICE Transactions on Electronics•Mar 23, 2021•5 citations
Abstract The Atacama Large Millimetre/Sub-millimetre Array (ALMA) wideband sensitivity upgrade (WSU) project marks the next milestone in the development of millimetre (mm) and sub-mm astronomy. In this paper, we present the design, optimisation, and performance analysis of the ALMA Band-9 superconductor-insulator-superconductor (SIS) mixer for applications in the upcoming WSU programme, and other high-frequency astronomical observations. The mixers feature a niobium radial-rectangular probe antenna integrated with a silicon-on-insulator (SOI) substrate, which ensures minimal RF power leakage and optimised power coupling. We base our mixer design on conventional aluminium oxide (AlO x ) tunnel junction technology, with a critical current density of about 10 kA cm−2. We explore the impact of different junction sizes on the radio frequency (RF) and intermediate frequency (IF) bandwidths. We demonstrate that the new mixer design is capable of meeting the more stringent sensitivity-bandwidth requirements of the ALMA-WSU programme over the original Band-9 frequency range (602–720 GHz), as the IF bandwidth performance reaches up to 20 GHz. The IF bandwidth improvement is approximately double that of the current existing ALMA Band-9 mixers. These results suggest that our mixer designs provide a promising solution for future ALMA upgrades and other high-frequency applications requiring broad RF and IF bandwidth.
We present the design and performance of the ALMA Band 6v2 receiver, developed at NRAO as part of the Wideband Sensitivity Upgrade (WSU). The upgraded sideband-separating (2SB) superconductor-insulator-superconductor (SIS) receiver extends the radio frequency (RF) coverage to 209–281 GHz and expands the high-sensitivity intermediate frequency (IF) bandwidth per sideband per polarization from the 4 GHz (6–10 GHz) of the Band 6v1 receiver to 15 GHz (3.5–18.5 GHz). To meet the stringent WSU requirements—which include a single sideband receiver noise temperature Trec,SSB15 dB over 90% of the IF range—the receiver employs improved cryogenic optics, highly balanced 2SB mixer assemblies, and a new low-noise local oscillator system. The 2SB mixer assemblies are based on SIS mixers fabricated on a 5-μm thick silicon-on-insulator (SOI) membrane, employing a two junction series array of Nb/Al-AlOx/Nb junctions. Laboratory measurements demonstrate compliance with the Band 6v2 receiver requirements.
Abstract The wide intermediate frequency (IF) bandwidth is a core performance metric for terahertz heterodyne receivers, and a wide-IF superconductor–insulator–superconductor (SIS) mixer is key to achieving this. This paper presents the simulation-based design, optimization, and performance analysis of a 345 GHz superconducting SIS mixer developed for wide-IF applications. The mixer employs a parallel-connected twin-junction tuning structure and integrates a dedicated IF impedance matching circuit, achieving wideband impedance matching between the mixer output port and low-noise amplifier. The design is based on two tunnel junction technologies, AlO x and AlN, with critical current densities of 1 kA·cm −2 and 25 kA·cm −2 , respectively. We systematically studied the effects of different junction materials and junction areas on the RF and IF bandwidth performance of the SIS mixer. It is found that for AlN-barrier junctions with diameters of 0.6 μ m and 0.8 μ m, the receiver’s IF noise temperature slowly decreased as the IF frequency increased at a high local oscillator frequency. Furthermore, we incorporated the calculated IF output port impedance into the mixer model for correction and introduced an integrated IF circuit approach, overcoming the original IF bandwidth limitation. Simulations show that the newly designed mixer achieves the stringent sensitivity and bandwidth requirements across the 320–370 GHz range, delivering an IF bandwidth of 4–22 GHz and a receiver noise temperature of 39–73 K. Notably, the −3 dB IF bandwidth is improved by more than 1.5 times compared to conventional AlO x -based designs. These findings provide new design guidelines and quantitative criteria for next-generation wide-IF receivers and other high-frequency applications requiring a wide IF bandwidth.
We present the design and preliminary experimental results of superconductor-insulator-superconductor (SIS) mixers for Atacama large millimeter array (ALMA) band 10 (780-950GHz) receivers. To achieve wide frequency coverage as well as low noise temperature, we integrated high current density (10 kA/cm2) and small-sized (one micrometer in diameter) Nb/AlOx/Nb SIS junctions with a tuning microstrip line using NbTiN ground plane and Al wiring layers. High quality NbTiN films with Tc reaching 14.5 K and Al films with residual resistivity ratio as large as 15 have been achieved. To minimize the waveguide transmission loss and facilitate the fabrication of mixer block, a full height waveguide was adopted. The waveguide probe was optimized to achieve low input impedance in the frequency range of 780-950 GHz while adopting a backshort cavity of zero depth. Preliminary RF testing with a Nb/Al microstrip tuning circuit demonstrated a DSB receiver noise temperature about 400 K at 832.5 GHz, which promises the accommodation of receiver performance in ALMA specification with low loss NbTiN/Al microstrip lines.
In this paper, we report on the design and experimental results of a fix-tuned Superconductor-Insulator-Superconductor (SIS) mixer for Atacama Large Millimeter/submillimeter Array (ALMA) band 8 (385-500 GHz) receivers. Nb-based SIS junctions of a current density of 10 kA/cm/sup 2/ and one micrometer size (fabricated with a two-step lift-off process) are employed to accomplish the ALMA receiver specification, which requires wide frequency coverage as well as low noise temperature. Parallel-connected twin junctions (PCTJ) are designed to resonate at the band center to tune out the junction geometric capacitance. A waveguide-microstrip probe is optimized to have nearly frequency-independent impedance at the probe's feed point, thereby making it much easier to match the low-impedance PCTJ over a wide frequency band. In addition, a superconducting magnet fixed onto the compact mixer block to provide efficient magnetic field coupling is designed. The SIS mixer demonstrates a minimum double-sideband receiver noise temperature of 108 K at the band center and temperatures of less than 167 K over the whole band (for an intermediate-frequency range of 4-8 GHz).
We present the designs of single-ended double sideband (DSB) superconductor-insulator-superconductor (SIS) mixers with broad radio frequency (RF) bandwidths combining Atacama Large Millimeter/sub-millimeter Array (ALMA) bands 5 plus 6 (163-273 GHz), and bands 6 plus 7 (211-373 GHz). We include both end-loaded stub and twin junction tuning methods to produce a suite of streamlined DSB mixer aiming for future applications such as sideband separating receivers. The designs feature silicon-on-insulator (SOI) substrates and gold beam leads. To broaden the intermediate frequency (IF) bandwidth, we incorporate IF matching circuits with external printed circuit boards (PCBs). Preliminary results from the fabrication and assembly process will follow a detailed analysis of the design.
This paper describes the development of superconductor-insulator-superconductor (SIS) mixers for the Atacama Large Millimeter/submillimeter Array (ALMA) from the device point of view. During the construction phase of ALMA, the National Astronomical Observatory of Japan (NAOJ) successfully fabricated SIS mixers to meet the stringent ALMA noise temperature requirements of less than 230 K (5 times the quantum noise) for Band 10 (787-950 GHz) in collaboration with the National Institute of Information and Communications Technology. Band 10 covers the highest frequency band of ALMA and is recognized as the most difficult band in terms of superconducting technology. After the construction, the NAOJ began development studies for ALMA enhancement such as wideband and multibeam SIS mixers according to top-level science requirements, which are also presented.