Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Terahertz Science and Technology

The ALMA Band 6v2 Pre-Production Receiver

A. Navarrini, Joseph. G. Lambert, Philip Dindo, John E. Effland, David Monasterio, Pablo Astudillo, Camilo Espinoza, Anthony R. Kerr, Kamaljeet Saini, Dustin Vaselaar, Alec Handy, Robert Lehmensiek, Arthur W. Lichtenberger, Michael E. Cyberey, Patricio Mena, Claudio Jarufe, Crystal Brogan, T. R. Hunter, Mike Shannon, Benjamin Casto, Greg Morris, Bert Hawkins

Published Jan 1, 2026• 0 citations
Publisher

Abstract

We present the design and performance of the ALMA Band 6v2 receiver, developed at NRAO as part of the Wideband Sensitivity Upgrade (WSU). The upgraded sideband-separating (2SB) superconductor-insulator-superconductor (SIS) receiver extends the radio frequency (RF) coverage to 209–281 GHz and expands the high-sensitivity intermediate frequency (IF) bandwidth per sideband per polarization from the 4 GHz (6–10 GHz) of the Band 6v1 receiver to 15 GHz (3.5–18.5 GHz). To meet the stringent WSU requirements—which include a single sideband receiver noise temperature Trec,SSB15 dB over 90% of the IF range—the receiver employs improved cryogenic optics, highly balanced 2SB mixer assemblies, and a new low-noise local oscillator system. The 2SB mixer assemblies are based on SIS mixers fabricated on a 5-μm thick silicon-on-insulator (SOI) membrane, employing a two junction series array of Nb/Al-AlOx/Nb junctions. Laboratory measurements demonstrate compliance with the Band 6v2 receiver requirements.

DOI
10.1109/tthz.2026.3751970

Related papers

Analysing the RF & IF bandwidth performances of ALMA Band-9 superconducting mixers for wideband sensitivity upgrade

Boon-Kok Tan, J-H Kim, Christine Chaumont +2 more

Abstract The Atacama Large Millimetre/Sub-millimetre Array (ALMA) wideband sensitivity upgrade (WSU) project marks the next milestone in the development of millimetre (mm) and sub-mm astronomy. In this paper, we present the design, optimisation, and performance analysis of the ALMA Band-9 superconductor-insulator-superconductor (SIS) mixer for applications in the upcoming WSU programme, and other high-frequency astronomical observations. The mixers feature a niobium radial-rectangular probe antenna integrated with a silicon-on-insulator (SOI) substrate, which ensures minimal RF power leakage and optimised power coupling. We base our mixer design on conventional aluminium oxide (AlO x ) tunnel junction technology, with a critical current density of about 10 kA cm−2. We explore the impact of different junction sizes on the radio frequency (RF) and intermediate frequency (IF) bandwidths. We demonstrate that the new mixer design is capable of meeting the more stringent sensitivity-bandwidth requirements of the ALMA-WSU programme over the original Band-9 frequency range (602–720 GHz), as the IF bandwidth performance reaches up to 20 GHz. The IF bandwidth improvement is approximately double that of the current existing ALMA Band-9 mixers. These results suggest that our mixer designs provide a promising solution for future ALMA upgrades and other high-frequency applications requiring broad RF and IF bandwidth.

Superconductor Science and Technology•Jul 28, 2025•1 citation

Performance of the First ALMA Band 5 Production Cartridge

Bhushan Billade, Olle Nyström, Denis Meledin +9 more

We present performance of the first ALMA Band 5 production cartridge, covering frequencies from 163 to 211 GHz. Atacama Large Millimeter/sub-millimeter Array (ALMA) Band 5 is a dual polarization, sideband separation (2SB) receiver based on all Niobium (Nb) superconductor–insulator–superconductor (SIS) tunnel junction mixers, providing 16 GHz of instantaneous RF bandwidth for astronomy observations. The 2SB mixer for each polarization employs a quadrature configuration. The sideband separation occurs at the output of the IF hybrid that has integrated bias-T for biasing the mixers, and is produced using superconducting thin-film technology. Experimental verification of the Band 5 cold cartridge performed together with warm cartridge assembly, confirms that the system noise temperature is below 45 K over most of the RF band, which is less than 5 photon noise (5 hf/k). This is to our knowledge, the best results reported at these frequencies. The measurement of the sideband rejection indicates that the sideband rejection is better than 10 dB over 90% of the observational band.

IEEE Transactions on Terahertz Science and Technology•Feb 21, 2012•54 citations

Design Of Dual Polarisation Sideband Separation Mixer For ALMA Band 5

Bhushan Billade

This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.

•Sep 1, 2009•1 citation

Design and characterization of sideband-separating SIS mixer RF hybrids for the Band 3 receiver (84-116 GHz)

Philip Dindo, Stephane M. X. Claude, Dennis Derdall +5 more

The Band3 ALMA front end receiver incorporates sideband-separating (2SB) superconductor-insulator-superconductor (SIS) RF hybrid assemblies to achieve low noise temperatures. The 2SB RF hybrid assembly consists of a feedhorn to direct the RF signals, RF and IF quadrature hybrids for separating the USB and LSB signals, and two SIS mixers to down convert the 100 GHz RF signals to 4-8 GHz IF signals. These assemblies require careful matching of the phase and amplitude of the signals in the USB and LSB pathways to minimize receiver noise. The individual components undergo careful characterization and tests to build suitable 2SB RF hybrids assemblies.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Jan 18, 2006•7 citations

A sensitive ALMA Band 10 SIS receiver engineering model

Yoshinori Uzawa, M. Kroug, Takafumi Kojima +7 more

We have developed a single polarization engineering model of the Atacama Large Millimeter/Submillimeter Array (ALMA) Band 10 (0.78–0.95 THz) receivers. The front-end optics comprises a pair of ellipsoidal mirrors and a corrugated feed horn. A waveguide mixer block is attached to the feed horn in which an NbTiN-based superconductor–insulator–superconductor (SIS) mixer chip, which uses a quartz substrate, is mounted onto a WR-1.2 full-height waveguide. The SIS mixer employs two Nb / AlO x / Nb junctions and an NbTiN/SiO 2 /Al microstrip tuning circuit. A very wide intermediate frequency (IF) system with a bandwidth of 4–12 GHz is employed. The receiver demonstrated double-sideband (DSB) noise temperatures of below 240 K at local oscillator (LO) frequencies ranging from 792 to 945 GHz, without any correction for loss in front of the receiver. The lowest DSB receiver noise temperature, 179 K, was obtained at the center frequency of the designed band, which corresponds to about 4 quanta. These results represent state-of-the-art sensitivity for a receiver at an operating physical temperature of 4 K.

Superconductor Science and Technology•Oct 19, 2009•22 citations

Design and Performance of a Sideband Separating SIS Mixer for 800–950 GHz

Andrey V. Khudchenko, M. Yu. Fominsky, Christopher Heiter +11 more

We present the design and results of characterization of a new sideband separating (2SB) mixer for 800-950 GHz, based on superconductor-insulator-superconductor (SIS) junctions. This is the first waveguide 2SB SIS mixer demonstrated at such a high frequency. The design is following the classical quadrature hybrid architecture, meanwhile additional attention was put on the reduction of reflections in the RF structure in order to minimize the RF imbalance, to achieve a high image rejection ratio (IRR). The RF waveguide block was manufactured by micromilling and populated by single-ended SIS mixers developed earlier for upgrade of the CHAMP+ high-band array on the APEX telescope. These SIS mixers have double-sideband (DSB) noise temperatures from 210 to 400 K. The assembled 2SB mixer yields a SSB noise temperature from 450 to 900 K, with an IRR above 15 dB in 95% of the band. Comparing the DSB and the SSB sensitivities, we find that the waveguide losses are as low as expected and do not exceed 0.6 dB. The presented mixer is a prototype for use in a 2SB dual polarization receiver planned for deployment on the APEX telescope.

IEEE Transactions on Terahertz Science and Technology•Sep 2, 2019•21 citations
We present the design and performance of the ALMA Band 6v2 receiver, developed at NRAO as part of the Wideband Sensitivity Upgrade (WSU). The upgraded sideband-separating (2SB) superconductor-insulator-superconductor (SIS) receiver extends the radio frequency (RF) coverage to 209–281 GHz and expands the high-sensitivity intermediate frequency (IF) bandwidth per sideband per polarization from the 4 GHz (6–10 GHz) of the Band 6v1 receiver to 15 GHz (3.5–18.5 GHz). To meet the stringent WSU requirements—which include a single sideband receiver noise temperature Trec,SSB15 dB over 90% of the IF range—the receiver employs improved cryogenic optics, highly balanced 2SB mixer assemblies, and a new low-noise local oscillator system. The 2SB mixer assemblies are based on SIS mixers fabricated on a 5-μm thick silicon-on-insulator (SOI) membrane, employing a two junction series array of Nb/Al-AlOx/Nb junctions. Laboratory measurements demonstrate compliance with the Band 6v2 receiver requirements.
Abstract The Atacama Large Millimetre/Sub-millimetre Array (ALMA) wideband sensitivity upgrade (WSU) project marks the next milestone in the development of millimetre (mm) and sub-mm astronomy. In this paper, we present the design, optimisation, and performance analysis of the ALMA Band-9 superconductor-insulator-superconductor (SIS) mixer for applications in the upcoming WSU programme, and other high-frequency astronomical observations. The mixers feature a niobium radial-rectangular probe antenna integrated with a silicon-on-insulator (SOI) substrate, which ensures minimal RF power leakage and optimised power coupling. We base our mixer design on conventional aluminium oxide (AlO x ) tunnel junction technology, with a critical current density of about 10 kA cm−2. We explore the impact of different junction sizes on the radio frequency (RF) and intermediate frequency (IF) bandwidths. We demonstrate that the new mixer design is capable of meeting the more stringent sensitivity-bandwidth requirements of the ALMA-WSU programme over the original Band-9 frequency range (602–720 GHz), as the IF bandwidth performance reaches up to 20 GHz. The IF bandwidth improvement is approximately double that of the current existing ALMA Band-9 mixers. These results suggest that our mixer designs provide a promising solution for future ALMA upgrades and other high-frequency applications requiring broad RF and IF bandwidth.
We present performance of the first ALMA Band 5 production cartridge, covering frequencies from 163 to 211 GHz. Atacama Large Millimeter/sub-millimeter Array (ALMA) Band 5 is a dual polarization, sideband separation (2SB) receiver based on all Niobium (Nb) superconductor–insulator–superconductor (SIS) tunnel junction mixers, providing 16 GHz of instantaneous RF bandwidth for astronomy observations. The 2SB mixer for each polarization employs a quadrature configuration. The sideband separation occurs at the output of the IF hybrid that has integrated bias-T for biasing the mixers, and is produced using superconducting thin-film technology. Experimental verification of the Band 5 cold cartridge performed together with warm cartridge assembly, confirms that the system noise temperature is below 45 K over most of the RF band, which is less than 5 photon noise (5 hf/k). This is to our knowledge, the best results reported at these frequencies. The measurement of the sideband rejection indicates that the sideband rejection is better than 10 dB over 90% of the observational band.
This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.
The Band3 ALMA front end receiver incorporates sideband-separating (2SB) superconductor-insulator-superconductor (SIS) RF hybrid assemblies to achieve low noise temperatures. The 2SB RF hybrid assembly consists of a feedhorn to direct the RF signals, RF and IF quadrature hybrids for separating the USB and LSB signals, and two SIS mixers to down convert the 100 GHz RF signals to 4-8 GHz IF signals. These assemblies require careful matching of the phase and amplitude of the signals in the USB and LSB pathways to minimize receiver noise. The individual components undergo careful characterization and tests to build suitable 2SB RF hybrids assemblies.
We have developed a single polarization engineering model of the Atacama Large Millimeter/Submillimeter Array (ALMA) Band 10 (0.78–0.95 THz) receivers. The front-end optics comprises a pair of ellipsoidal mirrors and a corrugated feed horn. A waveguide mixer block is attached to the feed horn in which an NbTiN-based superconductor–insulator–superconductor (SIS) mixer chip, which uses a quartz substrate, is mounted onto a WR-1.2 full-height waveguide. The SIS mixer employs two Nb / AlO x / Nb junctions and an NbTiN/SiO 2 /Al microstrip tuning circuit. A very wide intermediate frequency (IF) system with a bandwidth of 4–12 GHz is employed. The receiver demonstrated double-sideband (DSB) noise temperatures of below 240 K at local oscillator (LO) frequencies ranging from 792 to 945 GHz, without any correction for loss in front of the receiver. The lowest DSB receiver noise temperature, 179 K, was obtained at the center frequency of the designed band, which corresponds to about 4 quanta. These results represent state-of-the-art sensitivity for a receiver at an operating physical temperature of 4 K.
We present the design and results of characterization of a new sideband separating (2SB) mixer for 800-950 GHz, based on superconductor-insulator-superconductor (SIS) junctions. This is the first waveguide 2SB SIS mixer demonstrated at such a high frequency. The design is following the classical quadrature hybrid architecture, meanwhile additional attention was put on the reduction of reflections in the RF structure in order to minimize the RF imbalance, to achieve a high image rejection ratio (IRR). The RF waveguide block was manufactured by micromilling and populated by single-ended SIS mixers developed earlier for upgrade of the CHAMP+ high-band array on the APEX telescope. These SIS mixers have double-sideband (DSB) noise temperatures from 210 to 400 K. The assembled 2SB mixer yields a SSB noise temperature from 450 to 900 K, with an IRR above 15 dB in 95% of the band. Comparing the DSB and the SSB sensitivities, we find that the waveguide losses are as low as expected and do not exceed 0.6 dB. The presented mixer is a prototype for use in a 2SB dual polarization receiver planned for deployment on the APEX telescope.