Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Band-combining SIS mixer designs across 150-400 GHz

J-H Kim, F Boussaha, C Chaumont, A Baryshev, B-K Tan

Published Jan 1, 2025• 0 citations
OpenAlex

Abstract

We present the designs of single-ended double sideband (DSB) superconductor-insulator-superconductor (SIS) mixers with broad radio frequency (RF) bandwidths combining Atacama Large Millimeter/sub-millimeter Array (ALMA) bands 5 plus 6 (163-273 GHz), and bands 6 plus 7 (211-373 GHz). We include both end-loaded stub and twin junction tuning methods to produce a suite of streamlined DSB mixer aiming for future applications such as sideband separating receivers. The designs feature silicon-on-insulator (SOI) substrates and gold beam leads. To broaden the intermediate frequency (IF) bandwidth, we incorporate IF matching circuits with external printed circuit boards (PCBs). Preliminary results from the fabrication and assembly process will follow a detailed analysis of the design.

Related papers

Design Of Dual Polarisation Sideband Separation Mixer For ALMA Band 5

Bhushan Billade

This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.

•Sep 1, 2009•1 citation

An SIS-based sideband-separating heterodyne mixer optimized for the 600 to 720 GHz band

Fausto Patricio Mena, J. Kooi, Andrey M. Baryshev +4 more

The Atacama Large Millimeter Array (ALMA) is the largest radio astronomical enterprise ever proposed. When completed, each of its 64 constituting radio-telescopes will be able to hold 10 heterodyne receivers covering the spectroscopic windows allowed by the atmospheric transmission at the construction site, the altiplanos of the northern Chilean Andes. In contrast to the sideband-separating (2SB) receivers being developed at low frequencies, double-side-band (DSB) receivers are being developed for the highest two spectroscopic windows (bands 9 and 10). Despite of the well known advantages of 2SB mixers over their DSB counterparts, they have not been implemented at the highest-frequency bands as the involved dimensions for some of the radio frequency components are prohibitory small. However, the current state-of-the-art micromachining technology has proved that the structures necessary for this development are attainable. Here we report the design, modeling, realization, and characterization of a 2SB mixer for band 9 of ALMA (600 to 720 GHz). At the heart of the mixer, two superconductor-insulator-superconductor (SIS) junctions are used as mixing elements. The constructed instrument presents an excellent performance as shown by two important figures of merit: noise temperature of the system and side band ratio, both of them within ALMA specifications.

Journal of Physics Conference Series•Feb 1, 2008•3 citations

A 385-500 GHz Low Noise Superconductor-Insulator- Superconductor Mixer for ALMA Band 8

Wenlei Shan

We report on the design and experimental results of a fix-tuned Superconductor-Insulator-Superconductor (SIS) mixer for Atacama Large Millimeter/submillimeter Array (ALMA) band 8 (385-500 GHz) receivers. Nb-based SIS junctions of a current density of 10 kA/cm(2) and one micrometer size (fabricated with a two-step lift-off process) are employed to accomplish the ALMA receiver specification, which requires wide frequency coverage as well as low noise temperature. A parallel-connected twin-junction (PCTJ) is designed to resonate at the band center to tune out the junction geometric capacitance. A waveguide-microstrip probe is optimized to have nearly frequency-independent impedance at the probe's feed point, thereby making it easy to match the low-impedance PCTJ over a wide frequency band. The RF embedding impedance is retrieved by fitting the measured pumped I-V curves to confirm good matching between PCTJ and signal source. We demonstrate here a minimum double-sideband receiver noise temperature of 3 times of quantum limits for an intermediate-frequency range of 4-8 GHz. The mixers were measured in band 8 cartridge with a sideband separation scheme. Single-sideband receiver noise below ALMA specification was achieved over the whole band.

IEICE Transactions on Electronics•Feb 1, 2006•11 citations

Design and Development of SIS Mixers for ALMA Band 8

Wenlei Shan, Takashi Noguchi, S. C. Shi +1 more

In this paper, we report on the design and experimental results of a fix-tuned Superconductor-Insulator-Superconductor (SIS) mixer for Atacama Large Millimeter/submillimeter Array (ALMA) band 8 (385-500 GHz) receivers. Nb-based SIS junctions of a current density of 10 kA/cm/sup 2/ and one micrometer size (fabricated with a two-step lift-off process) are employed to accomplish the ALMA receiver specification, which requires wide frequency coverage as well as low noise temperature. Parallel-connected twin junctions (PCTJ) are designed to resonate at the band center to tune out the junction geometric capacitance. A waveguide-microstrip probe is optimized to have nearly frequency-independent impedance at the probe's feed point, thereby making it much easier to match the low-impedance PCTJ over a wide frequency band. In addition, a superconducting magnet fixed onto the compact mixer block to provide efficient magnetic field coupling is designed. The SIS mixer demonstrates a minimum double-sideband receiver noise temperature of 108 K at the band center and temperatures of less than 167 K over the whole band (for an intermediate-frequency range of 4-8 GHz).

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•27 citations

Design and Development of SIS Mixers for ALMA Band 10

Wenlei Shan, Sheng‐Cai Shi, T. Matsunaga +4 more

We present the design and preliminary experimental results of superconductor-insulator-superconductor (SIS) mixers for Atacama large millimeter array (ALMA) band 10 (780-950GHz) receivers. To achieve wide frequency coverage as well as low noise temperature, we integrated high current density (10 kA/cm2) and small-sized (one micrometer in diameter) Nb/AlOx/Nb SIS junctions with a tuning microstrip line using NbTiN ground plane and Al wiring layers. High quality NbTiN films with Tc reaching 14.5 K and Al films with residual resistivity ratio as large as 15 have been achieved. To minimize the waveguide transmission loss and facilitate the fabrication of mixer block, a full height waveguide was adopted. The waveguide probe was optimized to achieve low input impedance in the frequency range of 780-950 GHz while adopting a backshort cavity of zero depth. Preliminary RF testing with a Nb/Al microstrip tuning circuit demonstrated a DSB receiver noise temperature about 400 K at 832.5 GHz, which promises the accommodation of receiver performance in ALMA specification with low loss NbTiN/Al microstrip lines.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•40 citations

Development of superconducting THz receivers for radio astronomy

Yoshinori Uzawa, Yasunori Fujii, M. Kroug +8 more

A total of 73 dual polarization superconductor-insulator-superconductor (SIS) receivers for the Atacama Large Millimeter/submillimeter Array (ALMA) have been successfully produced to observe astronomical signals in the 787-950 GHz frequency band. The receivers use two double sideband (DSB) waveguide mixers with Nb/AlOx/Nb tunnel junctions and NbTiN/SiO2/Al microstrip tuning circuits on quartz substrate. The best achieved DSB receiver noise temperature is 125 K, corresponding to about 3 hf/kBfor 4 K operation.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Sep 1, 2016•2 citations
We present the designs of single-ended double sideband (DSB) superconductor-insulator-superconductor (SIS) mixers with broad radio frequency (RF) bandwidths combining Atacama Large Millimeter/sub-millimeter Array (ALMA) bands 5 plus 6 (163-273 GHz), and bands 6 plus 7 (211-373 GHz). We include both end-loaded stub and twin junction tuning methods to produce a suite of streamlined DSB mixer aiming for future applications such as sideband separating receivers. The designs feature silicon-on-insulator (SOI) substrates and gold beam leads. To broaden the intermediate frequency (IF) bandwidth, we incorporate IF matching circuits with external printed circuit boards (PCBs). Preliminary results from the fabrication and assembly process will follow a detailed analysis of the design.
This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.
The Atacama Large Millimeter Array (ALMA) is the largest radio astronomical enterprise ever proposed. When completed, each of its 64 constituting radio-telescopes will be able to hold 10 heterodyne receivers covering the spectroscopic windows allowed by the atmospheric transmission at the construction site, the altiplanos of the northern Chilean Andes. In contrast to the sideband-separating (2SB) receivers being developed at low frequencies, double-side-band (DSB) receivers are being developed for the highest two spectroscopic windows (bands 9 and 10). Despite of the well known advantages of 2SB mixers over their DSB counterparts, they have not been implemented at the highest-frequency bands as the involved dimensions for some of the radio frequency components are prohibitory small. However, the current state-of-the-art micromachining technology has proved that the structures necessary for this development are attainable. Here we report the design, modeling, realization, and characterization of a 2SB mixer for band 9 of ALMA (600 to 720 GHz). At the heart of the mixer, two superconductor-insulator-superconductor (SIS) junctions are used as mixing elements. The constructed instrument presents an excellent performance as shown by two important figures of merit: noise temperature of the system and side band ratio, both of them within ALMA specifications.
We report on the design and experimental results of a fix-tuned Superconductor-Insulator-Superconductor (SIS) mixer for Atacama Large Millimeter/submillimeter Array (ALMA) band 8 (385-500 GHz) receivers. Nb-based SIS junctions of a current density of 10 kA/cm(2) and one micrometer size (fabricated with a two-step lift-off process) are employed to accomplish the ALMA receiver specification, which requires wide frequency coverage as well as low noise temperature. A parallel-connected twin-junction (PCTJ) is designed to resonate at the band center to tune out the junction geometric capacitance. A waveguide-microstrip probe is optimized to have nearly frequency-independent impedance at the probe's feed point, thereby making it easy to match the low-impedance PCTJ over a wide frequency band. The RF embedding impedance is retrieved by fitting the measured pumped I-V curves to confirm good matching between PCTJ and signal source. We demonstrate here a minimum double-sideband receiver noise temperature of 3 times of quantum limits for an intermediate-frequency range of 4-8 GHz. The mixers were measured in band 8 cartridge with a sideband separation scheme. Single-sideband receiver noise below ALMA specification was achieved over the whole band.
In this paper, we report on the design and experimental results of a fix-tuned Superconductor-Insulator-Superconductor (SIS) mixer for Atacama Large Millimeter/submillimeter Array (ALMA) band 8 (385-500 GHz) receivers. Nb-based SIS junctions of a current density of 10 kA/cm/sup 2/ and one micrometer size (fabricated with a two-step lift-off process) are employed to accomplish the ALMA receiver specification, which requires wide frequency coverage as well as low noise temperature. Parallel-connected twin junctions (PCTJ) are designed to resonate at the band center to tune out the junction geometric capacitance. A waveguide-microstrip probe is optimized to have nearly frequency-independent impedance at the probe's feed point, thereby making it much easier to match the low-impedance PCTJ over a wide frequency band. In addition, a superconducting magnet fixed onto the compact mixer block to provide efficient magnetic field coupling is designed. The SIS mixer demonstrates a minimum double-sideband receiver noise temperature of 108 K at the band center and temperatures of less than 167 K over the whole band (for an intermediate-frequency range of 4-8 GHz).
We present the design and preliminary experimental results of superconductor-insulator-superconductor (SIS) mixers for Atacama large millimeter array (ALMA) band 10 (780-950GHz) receivers. To achieve wide frequency coverage as well as low noise temperature, we integrated high current density (10 kA/cm2) and small-sized (one micrometer in diameter) Nb/AlOx/Nb SIS junctions with a tuning microstrip line using NbTiN ground plane and Al wiring layers. High quality NbTiN films with Tc reaching 14.5 K and Al films with residual resistivity ratio as large as 15 have been achieved. To minimize the waveguide transmission loss and facilitate the fabrication of mixer block, a full height waveguide was adopted. The waveguide probe was optimized to achieve low input impedance in the frequency range of 780-950 GHz while adopting a backshort cavity of zero depth. Preliminary RF testing with a Nb/Al microstrip tuning circuit demonstrated a DSB receiver noise temperature about 400 K at 832.5 GHz, which promises the accommodation of receiver performance in ALMA specification with low loss NbTiN/Al microstrip lines.
A total of 73 dual polarization superconductor-insulator-superconductor (SIS) receivers for the Atacama Large Millimeter/submillimeter Array (ALMA) have been successfully produced to observe astronomical signals in the 787-950 GHz frequency band. The receivers use two double sideband (DSB) waveguide mixers with Nb/AlOx/Nb tunnel junctions and NbTiN/SiO2/Al microstrip tuning circuits on quartz substrate. The best achieved DSB receiver noise temperature is 125 K, corresponding to about 3 hf/kBfor 4 K operation.