Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1212.0815 · IEEE Transactions on Applied Superconductivity

Magnetic Josephson Junctions With Superconducting Interlayer for Cryogenic Memory

I. V. Vernik, V. V. Bol'ginov, Sergey V. Bakurskiy, A. A. Golubov, M. Yu. Kupriyanov, V. V. Ryazanov, O. A. Mukhanov

Published Dec 10, 2012• 149 citations
arXivHTMLPDF

Abstract

We investigate a Magnetic Josephson Junction (MJJ) - a superconducting device with ferromagnetic barrier for a scalable high-density cryogenic memory compatible with energy-efficient single flux quantum (SFQ) circuits. The superconductor-insulator-superconductor-ferromagnet-superconductor (SIS'FS) MJJs are analyzed both experimentally and theoretically. We found that the properties of SIS'FS junctions fall into two distinct classes based on the thickness of S'layer. We fabricate Nb-Al/AlOx-Nb-PdFe-Nb SIS'FS MJJs using a co-processing approach with a combination of HYPRES and ISSP fabrication processes. The resultant SIS'FS structure with thin superconducting S'-layer is substantially affected by the ferromagnetic layer as a whole. We fabricate these type of junctions to reach the device compatibility with conventional SIS junctions used for superconducting SFQ electronics to ensure a seamless integration of MJJ-based circuits and SIS JJ-based ultra-fast digital SFQ circuits. We report experimental results for MJJs, demonstrating their applicability for superconducting memory and digital circuits. These MJJs exhibitIcRnproduct only ~ 30% lower than that of conventional SIS junctions co-produced in the same fabrication. Analytical calculations for these SIS'FS structures are in a good agreement with the experiment. We discuss application of MJJ devices for memory and programmable logic circuits.

DOI
10.1109/tasc.2012.2233270

Related papers

Magnetic Josephson Junction Technology for Digital and Memory Applications

V. V. Ryazanov, V. V. Bol’ginov, Danila S. Sobanin +4 more

The lack of dense, fast, energy efficient memory has been the main detractor for multiple superconducting digital projects in the past. Recently, fundamental physics research in superconductor-ferromagnet thin-film tunnel structures created a new opportunity to solve this long-standing problem. Superconductivity and ferromagnetism, two deeply antagonistic electronic properties, can co-exist in form of Magnetic Josephson Junctions (MJJs). The superconducting-ferromagnetic MJJs are electrically compatible with traditional superconductor-insulator-superconductor (SIS) Josephson junctions (JJs) used for digital energy-efficient single flux quantum (eSFQ/ERSFQ) circuits. Both MJJ and JJ circuits have similar fabrication process and can be integrated on a single chip. As a result, a combination of MJJs and JJs can be used to form addressable memory cells, energy-efficient memory periphery circuits and programmable logic elements. In this paper, we present the test results of superconductor-insulator-ferromagnet-superconductor (SIFS) MJJs showing their applicability for superconducting spintronic memory and digital circuits.

Physics Procedia•Jan 1, 2012•121 citations

Ferromagnetic Josephson switching device with high characteristic voltage

Timofei I. Larkin, Vitaly V. Bol’ginov, Vasily S. Stolyarov +4 more

We develop a fast magnetic Josephson junction (MJJ)—a superconducting ferromagnetic device for a scalable high-density cryogenic memory compatible in speed and fabrication with energy-efficient single flux quantum (SFQ) circuits. We present experimental results for superconductor-insulator-ferromagnet-superconductor (SIFS) MJJs with high characteristic voltage IcRn of >700 μV proving their applicability for superconducting circuits. By applying magnetic field pulses, the device can be switched between MJJ logic states. The MJJ IcRn product is only ∼30% lower than that of conventional junction co-produced in the same process, allowing for integration of MJJ-based and SIS-based ultra-fast digital SFQ circuits operating at tens of gigahertz.

arXiv:1205.3372•Applied Physics Letters•May 28, 2012•169 citations

Nonvolatile memory cell using a superconducting-ferromagnetic π Josephson junction

Junwen Zeng, Lei Chen, Xianghai Zhong +8 more

Abstract Storage of a single magnetic flux quantum in a superconducting loop containing a Josephson junction represents a promising unit cell configuration for construction of a cryogenic memory of superconducting digital circuits. However, application of a DC bias current is required for operation of such a memory cell to maintain trapping of the flux quantum in the storage loop. In this work, we present a superconducting memory cell that uses a superconducting-magnetic π junction. The cell characteristics show flux quantum hysteresis centering at the zero-bias current. We develop a fabrication process that combines superconductor–ferromagnet–superconductor (SFS) junctions with superconductor–normal metal–superconductor (SNS) junctions. The critical current density of the SFS junctions shows a 0–π oscillation as a function of the ferromagnetic layer thickness. The formation of the π junction is confirmed further by the flux modulation curves of a superconducting quantum interference device made from SNS junctions with an additional SFS junction.

Superconductor Science and Technology•Jul 13, 2022•9 citations

Transport regimes in tunnel ferromagnetic Josephson junctions

R. Satariano, A. A. Golubov, E. Raja +13 more

We present a systematic study of the temperature-dependent transport properties of Nb- and Al-based superconductor--insulator--thin superconductor--ferromagnet--superconductor (SIsFS) Josephson junctions. By varying the superconducting material and the thickness of the intermediate superconducting layer, we identify three distinct transport regimes: a tunnel-dominated SIS-like regime, a temperature-driven crossover, and a complex weak-link regime. A unified Usadel-based description connects these regimes through the self-consistent pair potential of the intermediate s-layer. While for Al-based devices an SIS-like transport regime is observed, a self-consistent calculation of the s/F/S proximity electrode, combined with perturbative tunnel coupling to the outer electrode, accounts for Nb devices with different thickness of the superconducting interlayer. The calculation places the 10-nm-interlayer sample in a proximity-supported, strongly suppressed s state, close to the SInFS limit in which the interlayer is effectively driven normal (\textit{n}). A reduced nonlinear long-junction description captures the same limiting physics. The evolution of I_cR_N(T) thereby provides a direct experimental signature of the three transport regimes. Beyond the fundamental interest, the results establish practical design guidelines: Nb junctions with sufficiently thick s interlayers are well suited for high-speed cryogenic memory elements and tunable superconducting parametric amplifiers, while Al junctions are natural candidates for coherent superconducting quantum circuits

arXiv:2610.20268•Oct 14, 2026•0 citations

Design methodologies for high density superconducting circuits and systems

Ana Mitrović, Mark F. Bocko

With operating frequencies reaching hundreds of gigahertz and switching energies in the attojoule range, superconducting electronics has become one of the leading candidates among beyond CMOS technologies. The practical implementation of large scale superconducting digital systems is constrained by multiple challenges, including limited power delivery efficiency, restricted scalability and integration density, and the absence of mature electronic design automation tools for large scale circuit design. In this dissertation, modeling, analysis, and design methodologies are presented that address the scalability and integration density challenges of superconducting digital technologies. A methodology for thermal analysis is introduced to describe heat generation and propagation in rapid single flux quantum (RSFQ) circuits. The modeling approach provides temperature estimates that agree with numerical simulations while maintaining low computational cost, enabling temperature-aware design of RSFQ circuit structures and large scale layouts. By quantifying thermal effects on chip, this method supports reliable operation of digital circuits and guides the scaling of integration density in superconducting systems. To further improve scalability of superconducting digital circuits, the use of Josephson junctions with ferromagnetic barriers is investigated. Replacing the insulating barrier with a ferromagnetic layer modifies the current–phase relationship, enabling π-, 2ϕ-, and ϕ-junction operation. These junctions allow inductorless flux quantum storage, intrinsic bias, and phase logic, offering new approaches for area efficient and energy efficient computing with superconducting devices. An inductorless dynamic logic family based on bistable 2ϕ-junctions is proposed, exhibiting improved scalability compared with conventional RSFQ circuits. To enable accurate circuit analysis, a compact Verilog-A model of 2ϕ-junctions is developed. The model reproduces experimentally observed behavior of junctions with weak ferromagnetic and ferromagnetic insulator barriers, and simulations reveal the influence of harmonic components on switching dynamics, margins, and circuit robustness. A variation-aware design methodology is introduced for circuits employing superconductor-erromagnet-superconductor π-junctions. Sensitivities of the critical current density to process and temperature variations are quantified and margins are established for reliable circuit operation. It is shown that magnetic scattering, in particular spin-flip scattering, is the dominant source of parameter sensitivity in junctions with weak ferromagnetic barriers. Material and fabrication choices that enable better control of this parameter are therefore critical for improving reproducibility and reliable device performance. Together, the modeling and design methodologies developed in this dissertation contribute to improving the scalability and reliability of superconducting digital systems, supporting the advancement of high speed, energy efficient computing technologies.

•Jan 1, 2025•0 citations

Cryogenic Memories based on Spin-Singlet and Spin-Triplet Ferromagnetic Josephson Junctions

Eric C. Gingrich

The last several decades have seen an explosion in the use and size of computers for scientific applications. The US Department of Energy has set an ExaScale computing goal for high performance computing that is projected to be unattainable by current CMOS computing designs [1]. This has led to a renewed interest in superconducting computing as a means of beating these projections. One of the primary requirements of this thrust is the development of an efficient cryogenic memory. Estimates of power consumption of early Rapid Single Flux Quantum (RSFQ) memory designs are on the order of MW, far too steep for any real application [1]. Therefore, other memory concepts are required. S/F/S Josephson Junctions, a class of device in which two superconductors (S) are separated by one or more ferromagnetic layers (F) has shown promise as a memory element. Several different systems have been proposed utilizing either the spin-singlet or spin-triplet superconducting states [2]. This talk will discuss the concepts underpinning these devices, and the recent work done to demonstrate their feasibility. [1] Energy-Efficient Superconducting Computing Power Budgets and Requirements, D. Scott Holmes, Andrew L. Ripple, Marc A. Manheimer, IEEE Trans. Appl. Supercon., Vol 23, No. 3, June 2013 [2] B. M. Niedzielski et al., “Use of Pd-Fe and Ni-Fe-Nb as soft magnetic layers in ferromagnetic Josephson junctions for nonvolatile cryogenic memory,” IEEE Trans. Appl. Supercond., vol. 24, no. 4, Aug. 2014, Art. ID. 1800307.

Bulletin of the American Physical Society•Mar 15, 2016•0 citations
We investigate a Magnetic Josephson Junction (MJJ) - a superconducting device with ferromagnetic barrier for a scalable high-density cryogenic memory compatible with energy-efficient single flux quantum (SFQ) circuits. The superconductor-insulator-superconductor-ferromagnet-superconductor (SIS'FS) MJJs are analyzed both experimentally and theoretically. We found that the properties of SIS'FS junctions fall into two distinct classes based on the thickness of S'layer. We fabricate Nb-Al/AlOx-Nb-PdFe-Nb SIS'FS MJJs using a co-processing approach with a combination of HYPRES and ISSP fabrication processes. The resultant SIS'FS structure with thin superconducting S'-layer is substantially affected by the ferromagnetic layer as a whole. We fabricate these type of junctions to reach the device compatibility with conventional SIS junctions used for superconducting SFQ electronics to ensure a seamless integration of MJJ-based circuits and SIS JJ-based ultra-fast digital SFQ circuits. We report experimental results for MJJs, demonstrating their applicability for superconducting memory and digital circuits. These MJJs exhibitIcRnproduct only ~ 30% lower than that of conventional SIS junctions co-produced in the same fabrication. Analytical calculations for these SIS'FS structures are in a good agreement with the experiment. We discuss application of MJJ devices for memory and programmable logic circuits.
The lack of dense, fast, energy efficient memory has been the main detractor for multiple superconducting digital projects in the past. Recently, fundamental physics research in superconductor-ferromagnet thin-film tunnel structures created a new opportunity to solve this long-standing problem. Superconductivity and ferromagnetism, two deeply antagonistic electronic properties, can co-exist in form of Magnetic Josephson Junctions (MJJs). The superconducting-ferromagnetic MJJs are electrically compatible with traditional superconductor-insulator-superconductor (SIS) Josephson junctions (JJs) used for digital energy-efficient single flux quantum (eSFQ/ERSFQ) circuits. Both MJJ and JJ circuits have similar fabrication process and can be integrated on a single chip. As a result, a combination of MJJs and JJs can be used to form addressable memory cells, energy-efficient memory periphery circuits and programmable logic elements. In this paper, we present the test results of superconductor-insulator-ferromagnet-superconductor (SIFS) MJJs showing their applicability for superconducting spintronic memory and digital circuits.
We develop a fast magnetic Josephson junction (MJJ)—a superconducting ferromagnetic device for a scalable high-density cryogenic memory compatible in speed and fabrication with energy-efficient single flux quantum (SFQ) circuits. We present experimental results for superconductor-insulator-ferromagnet-superconductor (SIFS) MJJs with high characteristic voltage IcRn of >700 μV proving their applicability for superconducting circuits. By applying magnetic field pulses, the device can be switched between MJJ logic states. The MJJ IcRn product is only ∼30% lower than that of conventional junction co-produced in the same process, allowing for integration of MJJ-based and SIS-based ultra-fast digital SFQ circuits operating at tens of gigahertz.
Abstract Storage of a single magnetic flux quantum in a superconducting loop containing a Josephson junction represents a promising unit cell configuration for construction of a cryogenic memory of superconducting digital circuits. However, application of a DC bias current is required for operation of such a memory cell to maintain trapping of the flux quantum in the storage loop. In this work, we present a superconducting memory cell that uses a superconducting-magnetic π junction. The cell characteristics show flux quantum hysteresis centering at the zero-bias current. We develop a fabrication process that combines superconductor–ferromagnet–superconductor (SFS) junctions with superconductor–normal metal–superconductor (SNS) junctions. The critical current density of the SFS junctions shows a 0–π oscillation as a function of the ferromagnetic layer thickness. The formation of the π junction is confirmed further by the flux modulation curves of a superconducting quantum interference device made from SNS junctions with an additional SFS junction.
We present a systematic study of the temperature-dependent transport properties of Nb- and Al-based superconductor--insulator--thin superconductor--ferromagnet--superconductor (SIsFS) Josephson junctions. By varying the superconducting material and the thickness of the intermediate superconducting layer, we identify three distinct transport regimes: a tunnel-dominated SIS-like regime, a temperature-driven crossover, and a complex weak-link regime. A unified Usadel-based description connects these regimes through the self-consistent pair potential of the intermediate s-layer. While for Al-based devices an SIS-like transport regime is observed, a self-consistent calculation of the s/F/S proximity electrode, combined with perturbative tunnel coupling to the outer electrode, accounts for Nb devices with different thickness of the superconducting interlayer. The calculation places the 10-nm-interlayer sample in a proximity-supported, strongly suppressed s state, close to the SInFS limit in which the interlayer is effectively driven normal (\textit{n}). A reduced nonlinear long-junction description captures the same limiting physics. The evolution of I_cR_N(T) thereby provides a direct experimental signature of the three transport regimes. Beyond the fundamental interest, the results establish practical design guidelines: Nb junctions with sufficiently thick s interlayers are well suited for high-speed cryogenic memory elements and tunable superconducting parametric amplifiers, while Al junctions are natural candidates for coherent superconducting quantum circuits
With operating frequencies reaching hundreds of gigahertz and switching energies in the attojoule range, superconducting electronics has become one of the leading candidates among beyond CMOS technologies. The practical implementation of large scale superconducting digital systems is constrained by multiple challenges, including limited power delivery efficiency, restricted scalability and integration density, and the absence of mature electronic design automation tools for large scale circuit design. In this dissertation, modeling, analysis, and design methodologies are presented that address the scalability and integration density challenges of superconducting digital technologies. A methodology for thermal analysis is introduced to describe heat generation and propagation in rapid single flux quantum (RSFQ) circuits. The modeling approach provides temperature estimates that agree with numerical simulations while maintaining low computational cost, enabling temperature-aware design of RSFQ circuit structures and large scale layouts. By quantifying thermal effects on chip, this method supports reliable operation of digital circuits and guides the scaling of integration density in superconducting systems. To further improve scalability of superconducting digital circuits, the use of Josephson junctions with ferromagnetic barriers is investigated. Replacing the insulating barrier with a ferromagnetic layer modifies the current–phase relationship, enabling π-, 2ϕ-, and ϕ-junction operation. These junctions allow inductorless flux quantum storage, intrinsic bias, and phase logic, offering new approaches for area efficient and energy efficient computing with superconducting devices. An inductorless dynamic logic family based on bistable 2ϕ-junctions is proposed, exhibiting improved scalability compared with conventional RSFQ circuits. To enable accurate circuit analysis, a compact Verilog-A model of 2ϕ-junctions is developed. The model reproduces experimentally observed behavior of junctions with weak ferromagnetic and ferromagnetic insulator barriers, and simulations reveal the influence of harmonic components on switching dynamics, margins, and circuit robustness. A variation-aware design methodology is introduced for circuits employing superconductor-erromagnet-superconductor π-junctions. Sensitivities of the critical current density to process and temperature variations are quantified and margins are established for reliable circuit operation. It is shown that magnetic scattering, in particular spin-flip scattering, is the dominant source of parameter sensitivity in junctions with weak ferromagnetic barriers. Material and fabrication choices that enable better control of this parameter are therefore critical for improving reproducibility and reliable device performance. Together, the modeling and design methodologies developed in this dissertation contribute to improving the scalability and reliability of superconducting digital systems, supporting the advancement of high speed, energy efficient computing technologies.
The last several decades have seen an explosion in the use and size of computers for scientific applications. The US Department of Energy has set an ExaScale computing goal for high performance computing that is projected to be unattainable by current CMOS computing designs [1]. This has led to a renewed interest in superconducting computing as a means of beating these projections. One of the primary requirements of this thrust is the development of an efficient cryogenic memory. Estimates of power consumption of early Rapid Single Flux Quantum (RSFQ) memory designs are on the order of MW, far too steep for any real application [1]. Therefore, other memory concepts are required. S/F/S Josephson Junctions, a class of device in which two superconductors (S) are separated by one or more ferromagnetic layers (F) has shown promise as a memory element. Several different systems have been proposed utilizing either the spin-singlet or spin-triplet superconducting states [2]. This talk will discuss the concepts underpinning these devices, and the recent work done to demonstrate their feasibility. [1] Energy-Efficient Superconducting Computing Power Budgets and Requirements, D. Scott Holmes, Andrew L. Ripple, Marc A. Manheimer, IEEE Trans. Appl. Supercon., Vol 23, No. 3, June 2013 [2] B. M. Niedzielski et al., “Use of Pd-Fe and Ni-Fe-Nb as soft magnetic layers in ferromagnetic Josephson junctions for nonvolatile cryogenic memory,” IEEE Trans. Appl. Supercond., vol. 24, no. 4, Aug. 2014, Art. ID. 1800307.