Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Clean alkali dispensers for atomic devices using inexpensive, scalable intercalated pyrolyzed and graphitic carbon

William J. Doyle, Nathan Nunley, Paul Kunz, Dan Wasserman

Published Jul 15, 2026• 0 citations
Publisher

Abstract

Introducing alkali atoms to vapor cells and atomic devices can be challenging for reasons including, but not limited to, the reactivity of alkali atoms and the potential for contamination of the hermetically sealed interior of the vapor cell. Intercalated pyrolyzed and graphitic carbon dispensers present a favorable option for stably storing and transporting alkalis into atomic devices. In this work, we report the efficacy of two different carbon sources as low cost alkali intercalation targets for use in atomic devices. We report multiple intercalation and cell fabrication techniques, and demonstrate and characterize macroscopic and chip-scale atomic vapor cells with alkali-intercalated carbon sources. These alkali sources have potential for a wide range of use cases in atomic systems, including integration into chip-scale atomic devices using standard processing techniques.

DOI
10.1364/opticaopen.32984576.v1

Related papers

Clean alkali dispensers for atomic devices using inexpensive, scalable intercalated pyrolyzed and graphitic carbon

William J. Doyle, Nathan Nunley, Paul Kunz +1 more

Introducing alkali atoms to vapor cells and atomic devices can be challenging for reasons including, but not limited to, the reactivity of alkali atoms and the potential for contamination of the hermetically sealed interior of the vapor cell. Intercalated pyrolyzed and graphitic carbon dispensers present a favorable option for stably storing and transporting alkalis into atomic devices. In this work, we report the efficacy of two different carbon sources as low cost alkali intercalation targets for use in atomic devices. We report multiple intercalation and cell fabrication techniques, and demonstrate and characterize macroscopic and chip-scale atomic vapor cells with alkali-intercalated carbon sources. These alkali sources have potential for a wide range of use cases in atomic systems, including integration into chip-scale atomic devices using standard processing techniques.

•Jul 15, 2026•0 citations

Microfabricated Alkali Atom Vapor Cells for Chip Scale Atomic Clock

M.-Z. Huang, Jiashan Zhu, Guangfeng Shi +2 more

In this paper we present a novel fabrication technique for coherent population trapping based chip-sized alkali vapor cells. There are two cavities in the cell design, one is a reaction cavity for alkali dispenser and the other one is a working cavity for alkali storage. An alkali dispenser pill is placed in the reaction cavity and subsequently reacted to obtain pure alkali material. The alkali atoms can be transferred into the working cavity in vapor form once the cell is heated up to 70 degree. Since alkali reacts with many materials and cannot be handled in air, our method provides a low cost and high reproducible way to fabricate highly miniaturized vapor cells. Silicon micromachining and glass-Si-glass three-layer anodic bonding technology is applied to introduce alkali atoms and a buffer gas into the cell and effectively seal this environment within the cell. A rubidium vapor cell is demonstrated using our design. The cell size is 5×4×1.6 mm 3 , with hermetic seal leakage <5e −9 atm cc/s. Modulated optical absorption spectrum of the cell is obtained and matched with pure rubidium atom, indicating the suitability of these cells for use in highly miniaturized atomic frequency references based on CPT excitation scheme. In addition, the entire process is fabricated at the wafer level, with subsequent dicing into individual cells.

Annual Conference of the Chinese Society of Micro-Nano Technology (CSMNT)•Nov 22, 2017•0 citations

Collimated versatile atomic beam source with alkali dispensers

Bochao Wei, Alexandra Crawford, Yorick Andeweg +3 more

Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 °C) is undesirable for many applications, as it shifts the atomic speed distribution to higher values and presents a radiative heat source that can raise the temperature of its surroundings. For this reason, dispensers are typically not used in line-of-sight applications, such as atomic beam generation. In this work, we present an integrated rubidium dispenser collimating device with a thickness of only 2 mm that produces a beam of atoms traveling primarily in the forward direction. We find that the collimator plate serves to both shield the dispenser's radiation and moderate the velocity of the atomic beam so that the measured longitudinal speed distribution is comparable to that of an ordinary alkali oven at only a slightly elevated temperature of 200 °C. To confirm our theory, we also constructed another compact apparatus consisting of a dispenser and a silicon collimator and the measurements support our conclusion. Our integrated dispenser collimator will particularly be useful in integrated photonics and cavity QED on-chip, where a localized, directed source of Rb vapor in small quantities is needed.

arXiv:2202.07076•Applied Physics Letters•Apr 4, 2022•7 citations

Micro-fabricated Alkali Vapor Cells for Chip Scale Atomic Clocks Sealed at Low Temperature with Thin-Film Metallic Bonding

Rahel Strässle, Matthieu Pellaton, Yves Pétremand +4 more

Micro-fabriced alkali vapor cells and applications in various fields as the heart of ultraprecise sensors, like chip scale atomic clocks, magnetometers or gyroscopes. Miniaturization asks for either new fabrication techniques or new physical concepts or both. We present here a new fabrication technique for the alkali cells which allows the integration of a anti-relaxation wall coating for alkali vapor cells in order to improve the signal for miniazurized cells.

•Jan 1, 2013•0 citations

Chip-Scale Atomic Devices Based on Microfabricated Alkali Vapor Cells

John E. Kitching, Svenja A. Knappe, John Moreland +8 more

We describe recent progress in the development of millimeter-scale instruments based on alkali atom vapor cells implemented with microfabrication techniques. Because of their small size and correspondingly low power requirements, these "chip-scale" atomic clocks and magnetometers have the potential to bring atomically precise instrumentation to portable, battery-operated systems such as GPS receivers, remote sensors and wireless communication devices. In addition, wafer-level processing and assembly potentially allows for very low cost per instrument if high volumes are produced.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2007•1 citation

The Microfabricated Alkali Vapor Cell with High Hermeticity for Chip-Scale Atomic Clock

Shuo Jia, Zhiyuan Jiang, Binbin Jiao +4 more

Herein, a microfabricated millimeter-level vapor alkali cell with a high hermeticity is fabricated through a wet etching and single-chip anodic bonding process. The vapor cell, containing Rb and N2, was investigated in a coherent population trapping (CPT) setup for the application of a chip-scale atomic clock (CSAC). The contrast of CPT resonance is up to 1.1% within the only 1 mm length of light interacting with atom. The effects of some critical external parameters on the CPT resonance, such as laser intensity, cell temperature, and buffer gas pressure, are thoroughly studied and optimized. The improved microfabricated vapor cell also exhibited great potential for other chip-scale atomic devices.

Applied Sciences•Jan 3, 2022•21 citations
Introducing alkali atoms to vapor cells and atomic devices can be challenging for reasons including, but not limited to, the reactivity of alkali atoms and the potential for contamination of the hermetically sealed interior of the vapor cell. Intercalated pyrolyzed and graphitic carbon dispensers present a favorable option for stably storing and transporting alkalis into atomic devices. In this work, we report the efficacy of two different carbon sources as low cost alkali intercalation targets for use in atomic devices. We report multiple intercalation and cell fabrication techniques, and demonstrate and characterize macroscopic and chip-scale atomic vapor cells with alkali-intercalated carbon sources. These alkali sources have potential for a wide range of use cases in atomic systems, including integration into chip-scale atomic devices using standard processing techniques.
Introducing alkali atoms to vapor cells and atomic devices can be challenging for reasons including, but not limited to, the reactivity of alkali atoms and the potential for contamination of the hermetically sealed interior of the vapor cell. Intercalated pyrolyzed and graphitic carbon dispensers present a favorable option for stably storing and transporting alkalis into atomic devices. In this work, we report the efficacy of two different carbon sources as low cost alkali intercalation targets for use in atomic devices. We report multiple intercalation and cell fabrication techniques, and demonstrate and characterize macroscopic and chip-scale atomic vapor cells with alkali-intercalated carbon sources. These alkali sources have potential for a wide range of use cases in atomic systems, including integration into chip-scale atomic devices using standard processing techniques.
In this paper we present a novel fabrication technique for coherent population trapping based chip-sized alkali vapor cells. There are two cavities in the cell design, one is a reaction cavity for alkali dispenser and the other one is a working cavity for alkali storage. An alkali dispenser pill is placed in the reaction cavity and subsequently reacted to obtain pure alkali material. The alkali atoms can be transferred into the working cavity in vapor form once the cell is heated up to 70 degree. Since alkali reacts with many materials and cannot be handled in air, our method provides a low cost and high reproducible way to fabricate highly miniaturized vapor cells. Silicon micromachining and glass-Si-glass three-layer anodic bonding technology is applied to introduce alkali atoms and a buffer gas into the cell and effectively seal this environment within the cell. A rubidium vapor cell is demonstrated using our design. The cell size is 5×4×1.6 mm 3 , with hermetic seal leakage <5e −9 atm cc/s. Modulated optical absorption spectrum of the cell is obtained and matched with pure rubidium atom, indicating the suitability of these cells for use in highly miniaturized atomic frequency references based on CPT excitation scheme. In addition, the entire process is fabricated at the wafer level, with subsequent dicing into individual cells.
Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 °C) is undesirable for many applications, as it shifts the atomic speed distribution to higher values and presents a radiative heat source that can raise the temperature of its surroundings. For this reason, dispensers are typically not used in line-of-sight applications, such as atomic beam generation. In this work, we present an integrated rubidium dispenser collimating device with a thickness of only 2 mm that produces a beam of atoms traveling primarily in the forward direction. We find that the collimator plate serves to both shield the dispenser's radiation and moderate the velocity of the atomic beam so that the measured longitudinal speed distribution is comparable to that of an ordinary alkali oven at only a slightly elevated temperature of 200 °C. To confirm our theory, we also constructed another compact apparatus consisting of a dispenser and a silicon collimator and the measurements support our conclusion. Our integrated dispenser collimator will particularly be useful in integrated photonics and cavity QED on-chip, where a localized, directed source of Rb vapor in small quantities is needed.
We describe recent progress in the development of millimeter-scale instruments based on alkali atom vapor cells implemented with microfabrication techniques. Because of their small size and correspondingly low power requirements, these "chip-scale" atomic clocks and magnetometers have the potential to bring atomically precise instrumentation to portable, battery-operated systems such as GPS receivers, remote sensors and wireless communication devices. In addition, wafer-level processing and assembly potentially allows for very low cost per instrument if high volumes are produced.
Herein, a microfabricated millimeter-level vapor alkali cell with a high hermeticity is fabricated through a wet etching and single-chip anodic bonding process. The vapor cell, containing Rb and N2, was investigated in a coherent population trapping (CPT) setup for the application of a chip-scale atomic clock (CSAC). The contrast of CPT resonance is up to 1.1% within the only 1 mm length of light interacting with atom. The effects of some critical external parameters on the CPT resonance, such as laser intensity, cell temperature, and buffer gas pressure, are thoroughly studied and optimized. The improved microfabricated vapor cell also exhibited great potential for other chip-scale atomic devices.