Micro-fabriced alkali vapor cells and applications in various fields as the heart of ultraprecise sensors, like chip scale atomic clocks, magnetometers or gyroscopes. Miniaturization asks for either new fabrication techniques or new physical concepts or both. We present here a new fabrication technique for the alkali cells which allows the integration of a anti-relaxation wall coating for alkali vapor cells in order to improve the signal for miniazurized cells.
Micro-fabriced alkali vapor cells and applications in various fields as the heart of ultraprecise sensors, like chip scale atomic clocks, magnetometers or gyroscopes. Miniaturization asks for either new fabrication techniques or new physical concepts or both. We present here a new fabrication technique for the alkali cells which allows the integration of a anti-relaxation wall coating for alkali vapor cells in order to improve the signal for miniazurized cells.
We report on the realization and evaluation of micro-fabricated alkali vapor cells using a thin-film indium bonding technique. Optical and double-resonance spectroscopy performed on the cells demonstrates their suitability for atomic clock applications. Long-term measurements show a stable pressure inside the cells and therefore an excellent hermeticity of the bonding over several months. The low bonding process temperature of ≤ 140°C combined with good bond strength makes this method a promising candidate for realizing micro-fabricated alkali cells with anti-relaxation wall-coatings.
We present a microfabricated alkali vapor cell equipped with an anti-relaxation wall coating. The anti-relaxation coating used is octadecyltrichlorosilane and the cell was sealed by thin-film indium-bonding at a low temperature of 140 °C. The cell body is made of silicon and Pyrex and features a double-chamber design. Depolarizing properties due to liquid Rb droplets are avoided by confining the Rb droplets to one chamber only. Optical and microwave spectroscopy performed on this wall-coated cell are used to evaluate the cell's relaxation properties and a potential gas contamination. Double-resonance signals obtained from the cell show an intrinsic linewidth that is significantly lower than the linewidth that would be expected in case the cell had no wall coating but only contained a buffer-gas contamination on the level measured by optical spectroscopy. Combined with further experimental evidence this proves the presence of a working anti-relaxation wall coating in the cell. Such cells are of interest for applications in miniature atomic clocks, magnetometers, and other quantum sensors.
Chip-scale atomic devices combine elements of precision atomic spectroscopy, silicon micromachining, and advanced diode laser technology to create compact, low-power, and manufacturable instruments with high precision and stability. Microfabricated alkali vapor cells are at the heart of most of these technologies, and the fabrication of these cells is discussed in detail. We review the design, fabrication, and performance of chip-scale atomic clocks, magnetometers, and gyroscopes and discuss many applications in which these novel instruments are being used. Finally, we present prospects for future generations of miniaturized devices, such as photonically integrated systems and manufacturable devices, which may enable embedded absolute measurement of a broad range of physical quantities.
High-sensitivity sensors play a critical role in fundamental physics research, space magnetic field detection, geological monitoring, and biomedical applications. Atomic sensors, based on quantum mechanics principles, such as atomic magnetometers, atomic clocks, and atomic gyroscopes, etc. have emerged as pivotal technical equipment for precision measurements due to their exceptional sensitivity, low power consumption, and long-term stability. The atomic vapor cell, serving as the core component, facilitates quantum state manipulation via the Zeeman effect. Miniaturization and integration of these cells have not only advanced the development of portable atomic magnetometers but also provided a foundation for breakthroughs in chip-scale atomic clocks and enhanced navigation accuracy of atomic gyroscopes. The research progresses of chip-scale atomic vapor cells in recent years are reviewed. The advancements in alkali metal introduction methods, anti-relaxation surface coatings, and micro-nano fabrication techniques have enabled the miniaturization of atomic vapor cells while preserving high performance, creating new opportunities for the deployment of quantum sensing technologies across diverse fields. Looking ahead, multifunctional integration and material innovations in atomic vapor cells are expected to further broaden their applications in time-frequency standards, inertial navigation systems, and weak magnetic field measurements.
Compared with superconducting quantum interference devices, chip-scale atomic magnetometers using the wafer-level micro alkali vapor cells can be used more conveniently in the applications of geophysical mapping, health care and remote monitoring. Drastic wall collisions and decreased polarization lifetime are the main barriers for the performance of the chip-scale atomic magnetometers. In this study, OTS organic films coated on the inner surface of the micro vapor cells were used to suppress wall collisions and improve polarization lifetime of the alkali atoms in the micro cells. First of all, the fabrication process of wafer-level micro OTS coated vapor cells is introduced, the process is based on anodic bonding technology. Then the prepared wafer-level micro OTS coated vapor cells have been characterized by the water-contact angle test and measured in the micro-machined spin-exchange relaxation free(SERF) atomic magnetometers. Results show that the OTS coating is effective after anodic bonding from the water contact angle test. Results also indicate that the spin exchange relaxation free atomic magnetometer using the micro OTS-coated vapor cell can operate successfully.
We provide an overview of our research on chip-scale atomic devices. By miniaturizing optical setups based on precision spectroscopy, we have developed small atomic sensors and atomic references such as atomic clocks, atomic magnetometers, and optical wavelength references. We have integrated microfabricated alkali vapor cells with small low-power lasers, micro-optics, and low-power microwave oscillators. As a result, we anticipate that atomic stability can be achieved with small size, low cost, battery-operated devices. Advances in fabrication methods and performance are presented.