Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EPJ Quantum Technology

Semiconductor optical amplifier-based laser system for cold-atom sensors

Eric A. Kittlaus, Jonathon Hunacek, Mahmood Bagheri, Hani Nejadriahi, Mehdi Langlois, Sheng‐wey Chiow, Nan Yu, Siamak Forouhar

Published Apr 10, 2025• 7 citations
Publisher

Abstract

Precise control of atomic systems has led to an array of emerging 'quantum' sensor concepts ranging from Rydberg-atom RF-electric probes to cold-atom interferometer gravimeters. Looking forward, the potential impact of these technologies hinges on their capability to be adapted from laboratory-scale experiments to compact and low-power field-deployable instruments. However, existing setups typically require a bulky and power-hungry laser and optics system (LOS) to prepare, control, and interrogate the relevant atomic system using a variety of frequency-referenced and rapidly reconfigurable laser beams. In this work, we investigate the feasibility of using semiconductor optical amplifiers (SOAs) to replace high-power pump lasers and acousto-optic modulators within a simple atom cooling apparatus, looking forward to the ultimate goal of a space-deployable atom interferometer. We find that existing off-the-shelf SOA components operating at relevant wavelengths for Cs and Rb atom cooling (852 and 780 nm, respectively) are able to permit an attractive combination of rapid (sub-microsecond), high extinction ratio (>60-65 dB) switching while acting as power boosters prior to the atom physics package. These attributes enable a radically different, power-efficient approach to LOS design, reducing or eliminating the need for Watt-class laser amplifiers that are unsuitable for flight deployment. Building on these results, we construct a simple and compact all-semiconductor laser/amplifier LOS for atom cooling that is integrated with custom path-to-flight drive electronics. Up to 125 mW of total optical power is delivered to six fiber-coupled channels for magneto-optical-trap-based cooling of a cloud of neutral Cs atoms. The entire LOS, including reference and cooling laser subsystems and control electronics, occupies a volume of 20×20×15 cm and totals DC power consumption of around 13.5 W, and is designed in a modular format so that additional hardware for synthesizing atom interferometry beams may be added through future development efforts. These results indicate the utility of all-semiconductor laser systems for future low-power flyable atom-based sensor instruments.

DOI
10.1140/epjqt/s40507-025-00348-z

Related papers

Sub-Doppler rubidium atom cooling using a programmable agile integrated PZT-on-SiN resonator

Andrei Isichenko, S. Carpenter, Nick Montifiore +12 more

Abstract Programmability and precise control of laser frequency are essential for quantum experiments and applications such as atomic clocks, quantum computers, and cold-atom sensors. Current systems use bulky, power-hungry modulators and frequency shifters which are difficult to integrate and limit portability and scalability. We report an electrically controllable, agile optical frequency source based on a semiconductor laser stabilized to a photonic integrated resonator cavity with a lead zirconate titanate (PZT) actuator. We demonstrate this approach with precision programmable frequency control of a 780-nm laser that can periodically reference to rubidium-87 ( 87 Rb) spectroscopy followed by fast, programmable, arbitrary frequency tuning sequences for quantum control. We use this approach to demonstrate sub-Doppler cooling of 87 Rb without any external modulators, achieving atom-cloud temperatures as low as 16 μ K. The device achieves a tuning strength up to 1 GHz/V with 11 MHz modulation bandwidth while consuming only 10 nW of electrical power. This work establishes a route toward compact, low-power, and chip-scale laser systems for next-generation quantum and atomic sensing technologies.

arXiv:2601.11834•Nature Communications•Sep 16, 2026•4 citations

High performance of semiconductor optical amplifier available for cold atom physics research

马千里 Qianli, 夏林 Lin Xia, 鹿博 Bo Lu +4 more

We present a novel design of a compact, stable, and easy-adjustable semiconductor optical amplifier (SOA) system.This SOA system is capable of providing up to 560-mW laser power at the wavelength of 852 nm.For the continuous-wave (CW) seeding laser, the amplification gain can reach 18 dB.We add amplitude modulation onto the CW laser and measure the modulation amplification between seeding and output laser.The amplification gain remains constant within the frequency range from 10 Hz to 1 MHz.The whole system could work in ultra-stable condition: for CW seeding laser, the fluctuation of output power is less than 0.33% in several hours.

Chinese Optics Letters•Jan 1, 2009•2 citations

A transportable cold atom inertial sensor for space applications

Rémi Geiger, Guillaume Stern, Patrick Cheinet +7 more

Atom interferometry has hugely benefitted from advances made in cold atom physics over the past twenty years, and ultra-precise quantum sensors are now available for a wide range of applications [1]. In particular, cold atom interferometers have shown excellent performances in the field of acceleration and rotation measurements [2,3], and are foreseen as promising candidates for navigation, geophysics, geo-prospecting and tests of fundamental physics such as the Universality of Free Fall (UFF). In order to carry out a test of the UFF with atoms as test masses, one needs to compare precisely the accelerations of two atoms with different masses as they fall in the Earth’s gravitational field. The sensitivity of atom interferometers scales like the square of the time during which the atoms are in free fall, and on ground this interrogation time is limited by the size of the experimental setup to a fraction of a second. Sending an atom interferometer in space would allow for several seconds of excellent free-fall conditions, and tests of the UFF could be carried out with precisions as low as 10-15 [4]. However, cold atoms experiments rely on complex laser systems, which are needed to cool down and manipulate the atoms, and these systems are usually very sensitive to temperature fluctuations and vibrations. In addition, when operating an inertial sensor, vibrations are a major issue, as they deteriorate the performances of the instrument. This is why cold atom interferometers are usually used in ground based facilities, which provide stable enough environments. In order to carry out airborne or space-borne measurements, one has to design an instrument which is both compact and stable, and such that vibrations induced by the platform will not deteriorate the sensitivity of the sensor. We report on the operation of an atom interferometer on board a plane carrying out parabolic flights (Airbus A300 Zero-G, operated by Novespace). We have constructed a compact and stable laser setup, which is well suited for onboard applications. Our goal is to implement a dual-species Rb-K atom interferometer in order to carry out a test of the UFF in the plane. In this perspective, we are designing a dual-wavelength laser source, which will enable us to cool down and coherently manipulate the quantum states of both atoms. We have successfully tested a preliminary version of the source and obtained a double species magneto-optical trap (MOT).

International Conference on Space Optics (ICSO)•Nov 20, 2017•3 citations

A Photonic Integrated Light Generation, Control, and Delivery Engine for Creating Cold Atoms

Andrei Isichenko, Calisto Ruiz, Chuan Zhong +7 more

The creation of cold atoms underpins quantum sensing and precision metrology, computing, timekeeping, and fundamental science experiments. Miniaturizing the lasers and optical infrastructure, which occupy over 80% of the volume of these experiments, through photonic integration could improve robustness, reliability, and manufacturability while reducing cost and enabling portable space-based precision measurements and quantum tools for non-experts. Yet, there has been limited progress towards integration of the laser and optical infrastructure required to generate cold atoms onto a single chip. We demonstrate a photonic engine that generates, controls, and delivers precision light to create cold atoms in a rubidium 3-dimensional magneto-optical trap (3D-MOT). We integrate on a single chip two frequency-agile self-injection-locked lasers, laser frequency and intensity control, passive beam combining and splitting, signal monitoring, and high-efficiency beam delivery to a rubidium vapor cell. The integrated engine is shown to support multiple functions required for generating cold atoms including stable generation of low-noise cooling and repump light, frequency control for atom spectroscopy and stabilization, real-time laser monitoring, routing for laser offset locking, optical power modulation, and large-area three-beam delivery of 3 mW to the physics package. Fully electrically controlled, the engine enables sustained 3D-MOT operation, trapping more than 1 million atoms at an average temperature of 350 uK and supporting atom-number and temperature measurements. These results demonstrate the first single-chip integration of light generation, control, and delivery for cold-atom generation, offering a path toward smaller, more robust, and manufacturable cold-atom systems for applications including cold-atom clocks and sensors.

arXiv:2610.17918•Oct 13, 2026•0 citations

Software Defined Lasers using SDR Techniques - Enabling Atomic Clocks, Quantum Technologies, and Coherent Links

Ho Kwan Chau

Quantum technologies using laser-cooled atoms, such as cold atom interferometersand atomic clocks, have revealed their potential in ground-based instruments. Un-doubtedly, space-based quantum devices could provide orders of improvement undermicro-gravity environments. However, current instruments, including both terrestrialand space-based, rely on complex laser systems, resulting in a high Size, Weight, andPower (SWaP) and high-cost design. Overcoming this bottleneck could enable quantumtechnologies for low-cost experiments and missions using small satellites. This wouldopen the door to new types of scientific experiments and missions, such as constella-tions of quantum sensors, deep space optical communication networks, and cold atomgyroscopes.This research develops the Software Defined Laser (SDL), a compact laser systemarchitecture that applies Software Defined Radio (SDR) concepts to optical frequencycontrol. By combining reconfigurable Field-Programmable Gate Array (FPGA)-basedelectronics with Radio Frequency (RF) techniques and optical modulators, SDL reducesthe number of seed lasers and optical components while maintaining the performancerequired for quantum applications. We derive quantitative requirements for SDL byanalysing existing ground-based and space-based quantum instruments and develop ahighly configurable system-on-chip firmware to support diverse missions.A Python-based SDL model is developed to evaluate RF technologies, frequency-tuning topologies, and noise performance. Comprehensive noise analysis shows that allinvestigated RF sources contribute less than 100 Hz to laser linewidth, satisfying Ramanand optical clock requirements. A novel frequency-tuning method is proposed, main-taining sub-1 kHz linewidth while reducing tuning dead time from 5.8 ms to 200 µs.To improve robustness beyond conventional PID control, SDL enables a multiple-input multiple-output (MIMO) laser controller synthesised using H2 robust control.Both single-input single-output (SISO) and MIMO controllers are evaluated under re-alistic disturbances. The MIMO controller maintains laser frequency noise below 1 kHzand achieves 0.02 % power stability under 17.5 K temperature variations over 6000 s,outperforming state-of-the-art systems. To enable autonomous adaptation, an FPGA-accelerated H2 synthesis module is developed, reducing optimisation time by 30 % andenabling real-time controller reconfiguration during operation.

•Jan 1, 2026•0 citations

Compact laser modulation system for a transportable atomic gravimeter

Alejandra López-Vázquez, Mario A. Maldonado, E. Gómez +15 more

Nowadays, atom-based quantum sensors are leaving the laboratory towards field applications requiring compact and robust laser systems. Here we describe the realization of a compact laser system for atomic gravimetry. Starting with a single diode laser operating at 780 nm and adding only one fiber electro-optical modulator, one acousto-optical modulator and one laser amplifier we produce laser beams at all the frequencies required for a Rb-87 atomic gravimeter. Furthermore, we demonstrate that an atomic fountain configuration can also be implemented with our laser system. The modulated system reported here represents a substantial advance in the simplification of the laser source for transportable atom-based quantum sensors that can be adapted to other sensors such as atomic clocks, accelerometers, gyroscopes or magnetometers with minor modifications.

Optics Express•Dec 22, 2022•18 citations
Precise control of atomic systems has led to an array of emerging 'quantum' sensor concepts ranging from Rydberg-atom RF-electric probes to cold-atom interferometer gravimeters. Looking forward, the potential impact of these technologies hinges on their capability to be adapted from laboratory-scale experiments to compact and low-power field-deployable instruments. However, existing setups typically require a bulky and power-hungry laser and optics system (LOS) to prepare, control, and interrogate the relevant atomic system using a variety of frequency-referenced and rapidly reconfigurable laser beams. In this work, we investigate the feasibility of using semiconductor optical amplifiers (SOAs) to replace high-power pump lasers and acousto-optic modulators within a simple atom cooling apparatus, looking forward to the ultimate goal of a space-deployable atom interferometer. We find that existing off-the-shelf SOA components operating at relevant wavelengths for Cs and Rb atom cooling (852 and 780 nm, respectively) are able to permit an attractive combination of rapid (sub-microsecond), high extinction ratio (>60-65 dB) switching while acting as power boosters prior to the atom physics package. These attributes enable a radically different, power-efficient approach to LOS design, reducing or eliminating the need for Watt-class laser amplifiers that are unsuitable for flight deployment. Building on these results, we construct a simple and compact all-semiconductor laser/amplifier LOS for atom cooling that is integrated with custom path-to-flight drive electronics. Up to 125 mW of total optical power is delivered to six fiber-coupled channels for magneto-optical-trap-based cooling of a cloud of neutral Cs atoms. The entire LOS, including reference and cooling laser subsystems and control electronics, occupies a volume of 20×20×15 cm and totals DC power consumption of around 13.5 W, and is designed in a modular format so that additional hardware for synthesizing atom interferometry beams may be added through future development efforts. These results indicate the utility of all-semiconductor laser systems for future low-power flyable atom-based sensor instruments.
Abstract Programmability and precise control of laser frequency are essential for quantum experiments and applications such as atomic clocks, quantum computers, and cold-atom sensors. Current systems use bulky, power-hungry modulators and frequency shifters which are difficult to integrate and limit portability and scalability. We report an electrically controllable, agile optical frequency source based on a semiconductor laser stabilized to a photonic integrated resonator cavity with a lead zirconate titanate (PZT) actuator. We demonstrate this approach with precision programmable frequency control of a 780-nm laser that can periodically reference to rubidium-87 ( 87 Rb) spectroscopy followed by fast, programmable, arbitrary frequency tuning sequences for quantum control. We use this approach to demonstrate sub-Doppler cooling of 87 Rb without any external modulators, achieving atom-cloud temperatures as low as 16 μ K. The device achieves a tuning strength up to 1 GHz/V with 11 MHz modulation bandwidth while consuming only 10 nW of electrical power. This work establishes a route toward compact, low-power, and chip-scale laser systems for next-generation quantum and atomic sensing technologies.
We present a novel design of a compact, stable, and easy-adjustable semiconductor optical amplifier (SOA) system.This SOA system is capable of providing up to 560-mW laser power at the wavelength of 852 nm.For the continuous-wave (CW) seeding laser, the amplification gain can reach 18 dB.We add amplitude modulation onto the CW laser and measure the modulation amplification between seeding and output laser.The amplification gain remains constant within the frequency range from 10 Hz to 1 MHz.The whole system could work in ultra-stable condition: for CW seeding laser, the fluctuation of output power is less than 0.33% in several hours.
Atom interferometry has hugely benefitted from advances made in cold atom physics over the past twenty years, and ultra-precise quantum sensors are now available for a wide range of applications [1]. In particular, cold atom interferometers have shown excellent performances in the field of acceleration and rotation measurements [2,3], and are foreseen as promising candidates for navigation, geophysics, geo-prospecting and tests of fundamental physics such as the Universality of Free Fall (UFF). In order to carry out a test of the UFF with atoms as test masses, one needs to compare precisely the accelerations of two atoms with different masses as they fall in the Earth’s gravitational field. The sensitivity of atom interferometers scales like the square of the time during which the atoms are in free fall, and on ground this interrogation time is limited by the size of the experimental setup to a fraction of a second. Sending an atom interferometer in space would allow for several seconds of excellent free-fall conditions, and tests of the UFF could be carried out with precisions as low as 10-15 [4]. However, cold atoms experiments rely on complex laser systems, which are needed to cool down and manipulate the atoms, and these systems are usually very sensitive to temperature fluctuations and vibrations. In addition, when operating an inertial sensor, vibrations are a major issue, as they deteriorate the performances of the instrument. This is why cold atom interferometers are usually used in ground based facilities, which provide stable enough environments. In order to carry out airborne or space-borne measurements, one has to design an instrument which is both compact and stable, and such that vibrations induced by the platform will not deteriorate the sensitivity of the sensor. We report on the operation of an atom interferometer on board a plane carrying out parabolic flights (Airbus A300 Zero-G, operated by Novespace). We have constructed a compact and stable laser setup, which is well suited for onboard applications. Our goal is to implement a dual-species Rb-K atom interferometer in order to carry out a test of the UFF in the plane. In this perspective, we are designing a dual-wavelength laser source, which will enable us to cool down and coherently manipulate the quantum states of both atoms. We have successfully tested a preliminary version of the source and obtained a double species magneto-optical trap (MOT).
The creation of cold atoms underpins quantum sensing and precision metrology, computing, timekeeping, and fundamental science experiments. Miniaturizing the lasers and optical infrastructure, which occupy over 80% of the volume of these experiments, through photonic integration could improve robustness, reliability, and manufacturability while reducing cost and enabling portable space-based precision measurements and quantum tools for non-experts. Yet, there has been limited progress towards integration of the laser and optical infrastructure required to generate cold atoms onto a single chip. We demonstrate a photonic engine that generates, controls, and delivers precision light to create cold atoms in a rubidium 3-dimensional magneto-optical trap (3D-MOT). We integrate on a single chip two frequency-agile self-injection-locked lasers, laser frequency and intensity control, passive beam combining and splitting, signal monitoring, and high-efficiency beam delivery to a rubidium vapor cell. The integrated engine is shown to support multiple functions required for generating cold atoms including stable generation of low-noise cooling and repump light, frequency control for atom spectroscopy and stabilization, real-time laser monitoring, routing for laser offset locking, optical power modulation, and large-area three-beam delivery of 3 mW to the physics package. Fully electrically controlled, the engine enables sustained 3D-MOT operation, trapping more than 1 million atoms at an average temperature of 350 uK and supporting atom-number and temperature measurements. These results demonstrate the first single-chip integration of light generation, control, and delivery for cold-atom generation, offering a path toward smaller, more robust, and manufacturable cold-atom systems for applications including cold-atom clocks and sensors.
Quantum technologies using laser-cooled atoms, such as cold atom interferometersand atomic clocks, have revealed their potential in ground-based instruments. Un-doubtedly, space-based quantum devices could provide orders of improvement undermicro-gravity environments. However, current instruments, including both terrestrialand space-based, rely on complex laser systems, resulting in a high Size, Weight, andPower (SWaP) and high-cost design. Overcoming this bottleneck could enable quantumtechnologies for low-cost experiments and missions using small satellites. This wouldopen the door to new types of scientific experiments and missions, such as constella-tions of quantum sensors, deep space optical communication networks, and cold atomgyroscopes.This research develops the Software Defined Laser (SDL), a compact laser systemarchitecture that applies Software Defined Radio (SDR) concepts to optical frequencycontrol. By combining reconfigurable Field-Programmable Gate Array (FPGA)-basedelectronics with Radio Frequency (RF) techniques and optical modulators, SDL reducesthe number of seed lasers and optical components while maintaining the performancerequired for quantum applications. We derive quantitative requirements for SDL byanalysing existing ground-based and space-based quantum instruments and develop ahighly configurable system-on-chip firmware to support diverse missions.A Python-based SDL model is developed to evaluate RF technologies, frequency-tuning topologies, and noise performance. Comprehensive noise analysis shows that allinvestigated RF sources contribute less than 100 Hz to laser linewidth, satisfying Ramanand optical clock requirements. A novel frequency-tuning method is proposed, main-taining sub-1 kHz linewidth while reducing tuning dead time from 5.8 ms to 200 µs.To improve robustness beyond conventional PID control, SDL enables a multiple-input multiple-output (MIMO) laser controller synthesised using H2 robust control.Both single-input single-output (SISO) and MIMO controllers are evaluated under re-alistic disturbances. The MIMO controller maintains laser frequency noise below 1 kHzand achieves 0.02 % power stability under 17.5 K temperature variations over 6000 s,outperforming state-of-the-art systems. To enable autonomous adaptation, an FPGA-accelerated H2 synthesis module is developed, reducing optimisation time by 30 % andenabling real-time controller reconfiguration during operation.
Nowadays, atom-based quantum sensors are leaving the laboratory towards field applications requiring compact and robust laser systems. Here we describe the realization of a compact laser system for atomic gravimetry. Starting with a single diode laser operating at 780 nm and adding only one fiber electro-optical modulator, one acousto-optical modulator and one laser amplifier we produce laser beams at all the frequencies required for a Rb-87 atomic gravimeter. Furthermore, we demonstrate that an atomic fountain configuration can also be implemented with our laser system. The modulated system reported here represents a substantial advance in the simplification of the laser source for transportable atom-based quantum sensors that can be adapted to other sensors such as atomic clocks, accelerometers, gyroscopes or magnetometers with minor modifications.