Sub-Doppler rubidium atom cooling using a programmable agile integrated PZT-on-SiN resonator
Andrei Isichenko, S. Carpenter, Nick Montifiore, Jiawei Wang, Mayand Dangi, Nitesh Chauhan, Pritha Mukherjee, Xuting Yang, Nitin Sai Varma Indukuri, Mark Harrington, Chuan Zhong, Iain Michael Kierzewski, Ryan Q. Rudy, Jennifer T. Choy, Daniel J. Blumenthal
Abstract Programmability and precise control of laser frequency are essential for quantum experiments and applications such as atomic clocks, quantum computers, and cold-atom sensors. Current systems use bulky, power-hungry modulators and frequency shifters which are difficult to integrate and limit portability and scalability. We report an electrically controllable, agile optical frequency source based on a semiconductor laser stabilized to a photonic integrated resonator cavity with a lead zirconate titanate (PZT) actuator. We demonstrate this approach with precision programmable frequency control of a 780-nm laser that can periodically reference to rubidium-87 ( 87 Rb) spectroscopy followed by fast, programmable, arbitrary frequency tuning sequences for quantum control. We use this approach to demonstrate sub-Doppler cooling of 87 Rb without any external modulators, achieving atom-cloud temperatures as low as 16 μ K. The device achieves a tuning strength up to 1 GHz/V with 11 MHz modulation bandwidth while consuming only 10 nW of electrical power. This work establishes a route toward compact, low-power, and chip-scale laser systems for next-generation quantum and atomic sensing technologies.
Abstract Programmability and precise control of laser frequency are essential for quantum experiments and applications such as atomic clocks, quantum computers, and cold-atom sensors. Current systems use bulky, power-hungry modulators and frequency shifters which are difficult to integrate and limit portability and scalability. We report an electrically controllable, agile optical frequency source based on a semiconductor laser stabilized to a photonic integrated resonator cavity with a lead zirconate titanate (PZT) actuator. We demonstrate this approach with precision programmable frequency control of a 780-nm laser that can periodically reference to rubidium-87 ( 87 Rb) spectroscopy followed by fast, programmable, arbitrary frequency tuning sequences for quantum control. We use this approach to demonstrate sub-Doppler cooling of 87 Rb without any external modulators, achieving atom-cloud temperatures as low as 16 μ K. The device achieves a tuning strength up to 1 GHz/V with 11 MHz modulation bandwidth while consuming only 10 nW of electrical power. This work establishes a route toward compact, low-power, and chip-scale laser systems for next-generation quantum and atomic sensing technologies.
The creation of cold atoms underpins quantum sensing and precision metrology, computing, timekeeping, and fundamental science experiments. Miniaturizing the lasers and optical infrastructure, which occupy over 80% of the volume of these experiments, through photonic integration could improve robustness, reliability, and manufacturability while reducing cost and enabling portable space-based precision measurements and quantum tools for non-experts. Yet, there has been limited progress towards integration of the laser and optical infrastructure required to generate cold atoms onto a single chip. We demonstrate a photonic engine that generates, controls, and delivers precision light to create cold atoms in a rubidium 3-dimensional magneto-optical trap (3D-MOT). We integrate on a single chip two frequency-agile self-injection-locked lasers, laser frequency and intensity control, passive beam combining and splitting, signal monitoring, and high-efficiency beam delivery to a rubidium vapor cell. The integrated engine is shown to support multiple functions required for generating cold atoms including stable generation of low-noise cooling and repump light, frequency control for atom spectroscopy and stabilization, real-time laser monitoring, routing for laser offset locking, optical power modulation, and large-area three-beam delivery of 3 mW to the physics package. Fully electrically controlled, the engine enables sustained 3D-MOT operation, trapping more than 1 million atoms at an average temperature of 350 uK and supporting atom-number and temperature measurements. These results demonstrate the first single-chip integration of light generation, control, and delivery for cold-atom generation, offering a path toward smaller, more robust, and manufacturable cold-atom systems for applications including cold-atom clocks and sensors.
Precision atomic and quantum experiments rely on ultra-stable narrow linewidth lasers constructed using table-top ultra-low expansion reference cavities. These experiments often require multiple lasers, operating at different wavelengths, to perform key steps used in state preparation and measurement required in quantum sensing and computing. This is traditionally achieved by disciplining a cavity-stabilized laser to a key atomic transition and then transferring the transition linewidth and stability to other lasers using the same reference cavity in combination with bulk-optic frequency shifting such as acousto-optic modulators. Transitioning such capabilities to a future potentially low-cost photonic-integrated platform will enable a wide range of portable, low power, scalable quantum experiments and applications. Yet, today’s bulk optic approaches pose challenges related to lack of cavity tunability, large free spectral range, and limited photonic integration potential. Here, we address these challenges with demonstration of an agile photonic-integrated 780 nm ultra-high-Q tunable silicon nitride reference cavity that performs multiple critical experimental steps including laser linewidth narrowing, high resolution rubidium spectroscopy, dual-stage stabilization to a rubidium transition, and stability transfer to other lasers. We achieve up to 20 dB of frequency noise reduction at 10 kHz offset, precision spectroscopy over a 250 MHz range, and dual-stage locking to rubidium with an Allan deviation of 8.5 × 10 −12 at 1 s and up to 40 dB frequency noise reduction at 100 Hz frequency offset. We further use the rubidium-disciplined cavity to provide atomic-referenced frequency stability to a second laser and demonstrate multi-wavelength Rydberg electrometry quantum sensing. These results pave the path for integrated, compact, and scalable solutions for quantum sensing, computing, and other atomic and trapped ion applications.
In this study, a miniature laser frequency stabilization module for cold atom sensing applications was designed and realized.The module can lock the laser frequency to the saturated absorption spectrum of the D2 line of rubidium (Rb) atoms using the frequency modulation spectroscopy method.The module core is a tiny Rb cell, co-packaged with the saturation absorption optical setup, temperature control circuit, and detection circuit through a joint optical-mechanical-electrical design for a total volume of only 40 mm × 15 mm × 30 mm.The frequency fluctuation of the 780 nm laser after frequency stabilization by the module was within 1 MHz over 1000 s, which is adequate for magneto-optical trap experiments.The results verify the feasibility of the module as a frequency reference and provide a light source for portable cold atom sensing devices.
Precise control of atomic systems has led to an array of emerging 'quantum' sensor concepts ranging from Rydberg-atom RF-electric probes to cold-atom interferometer gravimeters. Looking forward, the potential impact of these technologies hinges on their capability to be adapted from laboratory-scale experiments to compact and low-power field-deployable instruments. However, existing setups typically require a bulky and power-hungry laser and optics system (LOS) to prepare, control, and interrogate the relevant atomic system using a variety of frequency-referenced and rapidly reconfigurable laser beams. In this work, we investigate the feasibility of using semiconductor optical amplifiers (SOAs) to replace high-power pump lasers and acousto-optic modulators within a simple atom cooling apparatus, looking forward to the ultimate goal of a space-deployable atom interferometer. We find that existing off-the-shelf SOA components operating at relevant wavelengths for Cs and Rb atom cooling (852 and 780 nm, respectively) are able to permit an attractive combination of rapid (sub-microsecond), high extinction ratio (>60-65 dB) switching while acting as power boosters prior to the atom physics package. These attributes enable a radically different, power-efficient approach to LOS design, reducing or eliminating the need for Watt-class laser amplifiers that are unsuitable for flight deployment. Building on these results, we construct a simple and compact all-semiconductor laser/amplifier LOS for atom cooling that is integrated with custom path-to-flight drive electronics. Up to 125 mW of total optical power is delivered to six fiber-coupled channels for magneto-optical-trap-based cooling of a cloud of neutral Cs atoms. The entire LOS, including reference and cooling laser subsystems and control electronics, occupies a volume of 20×20×15 cm and totals DC power consumption of around 13.5 W, and is designed in a modular format so that additional hardware for synthesizing atom interferometry beams may be added through future development efforts. These results indicate the utility of all-semiconductor laser systems for future low-power flyable atom-based sensor instruments.
We have designed and completed initial testing on a laser source suitable for atomic interferometry from compact, robust, integrated components. Our design is enabled by capitalizing on robust, well-commercialized, low-noise telecom components with high reliability and declining costs which will help to drive the widespread deployment of this system. The key innovation is the combination of current telecom-based fiber laser and modulator technology with periodicallypoled waveguide technology to produce tunable laser light at rubidium D1 and D2 wavelengths (and expandable to other alkalis) using second harmonic generation (SHG). Unlike direct-diode sources, this source is immune to feedback at the Rb line eliminating the need for bulky high-power isolators in the system. In addition, the source has GHz-level frequency agility and in our experiments was found to only be limited by the agility of our RF generator. As a proof-of principle, the source was scanned through the Doppler-broadened Rb D2 absorption line. With this technology, multiple channels can be independently tuned to produce the fields needed for addressing atomic states in atom interferometers and clocks. Thus, this technology could be useful in the development cold-atom inertial sensors and gyroscopes.
We present the development and complete spectral characterization of our compact and frequency-stabilized laser heads, to be used for rubidium atomic clocks and basic spectroscopy. The light source is a Distributed Feed-Back (DFB) laser diode emitting at 780 nm or 795 nm. The laser frequency is stabilized on a sub-Doppler absorption peak of the 87Rb atom, obtained from an evacuated rubidium cell. These laser heads, including the electronics for the light signals detection, have an overall volume of 0.63 liters. We also present a variant of the laser head into which is integrated an Acousto-Optical Modulator (AOM) that precisely detunes the laser frequency in order to minimize the AC Stark shift in Rb atomic clocks.