Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Space Optics (ICSO)

A transportable cold atom inertial sensor for space applications

Rémi Geiger, Guillaume Stern, Patrick Cheinet, Alexandre Bresson, Arnaud Landragin, Philippe Bouyer, Vincent Ménoret, Baptiste Battelier, Nassim Zahzam, Franck Pereira dos Santos

Published Nov 20, 2017• 3 citations
Publisher

Abstract

Atom interferometry has hugely benefitted from advances made in cold atom physics over the past twenty years, and ultra-precise quantum sensors are now available for a wide range of applications [1]. In particular, cold atom interferometers have shown excellent performances in the field of acceleration and rotation measurements [2,3], and are foreseen as promising candidates for navigation, geophysics, geo-prospecting and tests of fundamental physics such as the Universality of Free Fall (UFF). In order to carry out a test of the UFF with atoms as test masses, one needs to compare precisely the accelerations of two atoms with different masses as they fall in the Earth’s gravitational field. The sensitivity of atom interferometers scales like the square of the time during which the atoms are in free fall, and on ground this interrogation time is limited by the size of the experimental setup to a fraction of a second. Sending an atom interferometer in space would allow for several seconds of excellent free-fall conditions, and tests of the UFF could be carried out with precisions as low as 10-15 [4]. However, cold atoms experiments rely on complex laser systems, which are needed to cool down and manipulate the atoms, and these systems are usually very sensitive to temperature fluctuations and vibrations. In addition, when operating an inertial sensor, vibrations are a major issue, as they deteriorate the performances of the instrument. This is why cold atom interferometers are usually used in ground based facilities, which provide stable enough environments. In order to carry out airborne or space-borne measurements, one has to design an instrument which is both compact and stable, and such that vibrations induced by the platform will not deteriorate the sensitivity of the sensor. We report on the operation of an atom interferometer on board a plane carrying out parabolic flights (Airbus A300 Zero-G, operated by Novespace). We have constructed a compact and stable laser setup, which is well suited for onboard applications. Our goal is to implement a dual-species Rb-K atom interferometer in order to carry out a test of the UFF in the plane. In this perspective, we are designing a dual-wavelength laser source, which will enable us to cool down and coherently manipulate the quantum states of both atoms. We have successfully tested a preliminary version of the source and obtained a double species magneto-optical trap (MOT).

DOI
10.1117/12.2309256

Related papers

Inertial ultra-cold atom sensors in weightlessness

Baptiste Battelier, Philippe Bouyer, Arnaud Landragin +3 more

Quantum technology based on cold-atom interferometers is showing great promise for fields such as inertial sensing and fundamental physics. However, the best precision achievable on Earth is limited by the free-fall time of the atoms, and their full potential can only be realized in Space where interrogation times of many seconds will lead to unprecedented sensitivity. Various mission scenarios are presently being pursued, which plan to implement matter-waves inertial sensors to detect gravitational waves, to measure the Earth gravity field or to test fundamental physics such as the Equivalence Principle.We developed a cold atom sensor experiment adapted to microgravity platforms, especially the ZERO-G plane. To achieve a test of the Universality of Free Fall, we realize the first onboard operation of simultaneous ^{87}Rb - ^{39}K interferometers in the weightlessness environment produced during parabolic flight. The large vibration levels (10 ^{-2} g/Hz ^{1/2}), acceleration range and rotation rates (5 deg/s) during flight present significant technical challenges for atom interferometers. By hybridizing each atomic sensor with a common mechanical accelerometer, we achieve a sensitivity of 3.4 10 ^{-5} g per shot-more than 1600 times below the ambient vibration level onboard the aircraft. We demonstrate the capability of our dual-quantum sensor by measuring the Eötvös parameter with systematic-limited uncertainties of 3.0 10 ^{-4} during micro-gravity. This constitutes the first quantum test of the equivalence principle in a free falling vehicle. Our results can be extended to the trajectory of a satellite for future Space missions. We also achieved a simultaneous ^{87}Rb- ^{39}K interferometer on ground with a long term stability on the differential acceleration measurement around 5 10 ^{-8}g, limited by the fall of the atom clouds. To increase the interrogation time and the sensitivity, a ZERO-G simulator has been installed in our laboratory and allows our experiment to be in free fall during 500 ms every 12 seconds, to achieve highly repeatable measurements in microgravity. We expect to increase our short-term sensitivity by two orders of magnitude, and consequently reach a long-term measurement of the Eötvös parameter at the level of 10 ^{-11}.To benefit from the free fall of the experiment completely, it is necessary to produce atoms clouds with a reduced velocity dispersion. To reach this goal, we put ^{87}Rb atoms in an optical dipole trap supplied by a compact fiber laser compliant with onboard applications and decrease the optical power on a very controlled way to obtain evaporative cooling. Preliminary results of ultra-fast evaporative cooling (less than a few seconds) onboard the ZERO-G plane allowed us to reach a regime of temperature compliant with an interrogation time of the order of one second. This method and technology will be tested on the ZERO-G simulator as well.

•Jul 14, 2018•0 citations

Development of a transportable atom interferometer operating as inertial and gravity sensor

A. Giorgini

Atom Interferometry methods open new prospectives for absolute acceleration measurements; the quantum features of matter and the employment of atomic test masses with manipulation technique of internal and external degrees of freedom lead to a new generation of quantum sensors. In this thesis I present the development of a prototype for a transportable sensor at system and subsystem level. An instrument with such characteristics can find applications in many felds. The work has been developed in the framework of two European projects respectively oriented to the realization of an atom interferometry based absolute gravimeter for geophysical and metrological applications and to the realization of a Space Atom Interferometer for tests in micro-gravity environment. In order to focus on the possible scientific landscape I briefy illustrate in the introduction the existing devices and their characteristic performances, pointing out how the atom interferometry may represent a valid alternative leading to a new generation of quantum devices. The study, the development and the realization stages for our instrument are presented either for the laser system realization and for the the implementation of the whole apparatus. This work leads to the development of a very compact atomic physics interferometric system responding to the scientific requirements that represent our target. From the laser system side it has been realized also a complete and compact apparatus organized in a modular framework with stand alone components characterized by high working performances. This laser subsystem also includes laser sources in an external cavity configuration specially oriented to transportable apparatuses; they are characterized by an intrinsical passive stability, robustness and very narrow emission linewidth. The experience with neutral atom manipulation and with atom cooling and trapping technique has been integrated with a direct implementation, characterization and optimization of a Two Dimensional Magneto Optical Trap as a cold atoms source for an operating Atom Interferometer. Such kind of implementation represents a fundamental topic for a transportable sensor realization.

•Jan 1, 2009•2 citations

Vectorial quantum sensors

Philippe Bouyer

Inertial sensors based on cold atoms and light-pulse interferometry exhibit state-of-the-art sensitivity and ultra-low measurement bias that could revolutionize a variety of fields including geophysics and seismology, gravitational wave detection and fundamental tests of gravity, and inertial navigation. In the latter case, cold-atom interferometers are widely considered as breakthrough technology for future autonomous INSs. Nowadays, absolute quantum inertial sensors are available as commercial and field-deployable devices. Yet, their current size and complexity has not yet reached a technology readiness level compatible with mobile applications or plug-and-play operation by non-specialists. These systems are in desperate need of further development and miniaturization. We will present progress beyond these first experiments while exploring new methods relying on 3D matter-wave manipulation that can lead to interferometer geometries that are simultaneously sensitive to accelerations and rotations in 3D and can discern their vector components within a single measurement. These novel innovations produce additional sensitivity to rotations and gravity gradients which has not yet been exploited experimentally and could be a game changing innovation for future atomic sensors. The ability to measure the full acceleration and rotation vectors with a compact, high-precision, low-bias inertial sensor could strongly impact the fields of inertial navigation, gravity gradiometry, and gyroscopy.

Optical and Quantum Sensing and Precision Metrology II•Mar 9, 2022•0 citations

A Transportable Gravity Gradiometer Based on Atom Interferometry

Nan Yu, Robert J. Thompson, James R. Kellogg +3 more

A transportable atom interferometer-based gravity gradiometer has been developed at JPL to carry out measurements of Earth's gravity field at ever finer spatial resolutions, and to facilitate high-resolution monitoring of temporal variations in the gravity field from ground- and flight-based platforms. Existing satellite-based gravity missions such as CHAMP and GRACE measure the gravity field via precise monitoring of the motion of the satellites; i.e. the satellites themselves function as test masses. JPL's quantum gravity gradiometer employs a quantum phase measurement technique, similar to that employed in atomic clocks, made possible by recent advances in laser cooling and manipulation of atoms. This measurement technique is based on atomwave interferometry, and individual laser-cooled atoms are used as drag-free test masses. The quantum gravity gradiometer employs two identical atom interferometers as precision accelerometers to measure the difference in gravitational acceleration between two points (Figure 1). By using the same lasers for the manipulation of atoms in both interferometers, the accelerometers have a common reference frame and non-inertial accelerations are effectively rejected as common mode noise in the differential measurement of the gravity gradient. As a result, the dual atom interferometer-based gravity gradiometer allows gravity measurements on a moving platform, while achieving the same long-term stability of the best atomic clocks. In the laboratory-based prototype (Figure 2), the cesium atoms used in each atom interferometer are initially collected and cooled in two separate magneto-optic traps (MOTs). Each MOT, consisting of three orthogonal pairs of counter-propagating laser beams centered on a quadrupole magnetic field, collects up to 10(exp 9) atoms. These atoms are then launched vertically as in an atom fountain by switching off the magnetic field and introducing a slight frequency shift between pairs of lasers to create a moving rest frame for the trapped atoms. While still in this moving-frame molasses, the laser frequencies are further detuned from the atomic resonance (while maintaining this relative frequency shift) to cool the atom cloud's temperature to 2 K or below, corresponding to an rms velocity of less than 2 cm/s. After launch, the cold atoms undergo further state and velocity selection to prepare for atom interferometry. The atom interferometers are then realized using laser-induced stimulated Raman transitions to perform the necessary manipulations of each atom, and the resulting interferometer phase is measured using laser-induced fluorescence for state-normalized detection. More than 20 laser beams with independent controls of frequency, phase, and intensity are required for this measurement sequence. This instrument can facilitate the study of Earth's gravitational field from surface and air vehicles, as well as from space by allowing gravity mapping from a low-cost, single spacecraft mission. In addition, the operation of atom interferometer-based instruments in space offers greater sensitivity than is possible in terrestrial instruments due to the much longer interrogation times available in the microgravity environment. A space-based quantum gravity gradiometer has the potential to achieve sensitivities similar to the GRACE mission at long spatial wavelengths, and will also have resolution similar to GOCE for measurement at shorter length scales.

•May 1, 2010•2 citations

I.C.E.: a transportable atomic inertial sensor for test in microgravity

Robert A. Nyman, Gael P. Varoquaux, Jean‐François Clément +9 more

We present our the construction of an atom interferometer for inertial sensing in microgravity, as part of the I.C.E. (Interferometrie Coherente pour l’Espace) collaboration. On-board laser systems have been developed based on fibre-optic components, which are insensitive to mechanical vibrations and acoustic noise, have sub-MHz linewidth, and remain frequency stabilised for weeks at a time. A compact, transportable vacuum system has been built, and used for laser cooling and magneto-optical trapping. We will use a mixture of quantum degenerate gases, bosonic 87Rb and fermionic 40K, in order to find the optimal conditions for precision and sensitivity of inertial measurements. Microgravity will be realised in parabolic flights lasting up to 20s in an Airbus.

International Conference on Space Optics (ICSO)•Nov 21, 2017•0 citations

Development of compact cold-atom sensors for inertial navigation

Baptiste Battelier, B. Barrett, Lauriane Fouché +7 more

Inertial sensors based on cold atom interferometry exhibit many interesting features for applications related to inertial navigation, particularly in terms of sensitivity and long-term stability. However, at present the typical atom interferometer is still very much an experiment—consisting of a bulky, static apparatus with a limited dynamic range and high sensitivity to environmental effects. To be compliant with mobile applications further development is needed. In this work, we present a compact and mobile experiment, which we recently used to achieve the first inertial measurements with an atomic accelerometer onboard an aircraft. By integrating classical inertial sensors into our apparatus, we are able to operate the atomic sensor well beyond its standard operating range, corresponding to half of an interference fringe. We report atom-based acceleration measurements along both the horizontal and vertical axes of the aircraft with one-shot sensitivities of 2.3 × 10−4 g over a range of ∼ 0.1 g. The same technology can be used to develop cold-atom gyroscopes, which could surpass the best optical gyroscopes in terms of long-term sensitivity. Our apparatus was also designed to study multi-axis atom interferometry with the goal of realizing a full inertial measurement unit comprised of the three axes of acceleration and rotation. Finally, we present a compact and tunable laser system, which constitutes an essential part of any cold-atom-based sensor. The architecture of the laser is based on phase modulating a single fiber-optic laser diode, and can be tuned over a range of 1 GHz in less than 200 μs.

arXiv:1605.02454•Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 29, 2016•84 citations
Atom interferometry has hugely benefitted from advances made in cold atom physics over the past twenty years, and ultra-precise quantum sensors are now available for a wide range of applications [1]. In particular, cold atom interferometers have shown excellent performances in the field of acceleration and rotation measurements [2,3], and are foreseen as promising candidates for navigation, geophysics, geo-prospecting and tests of fundamental physics such as the Universality of Free Fall (UFF). In order to carry out a test of the UFF with atoms as test masses, one needs to compare precisely the accelerations of two atoms with different masses as they fall in the Earth’s gravitational field. The sensitivity of atom interferometers scales like the square of the time during which the atoms are in free fall, and on ground this interrogation time is limited by the size of the experimental setup to a fraction of a second. Sending an atom interferometer in space would allow for several seconds of excellent free-fall conditions, and tests of the UFF could be carried out with precisions as low as 10-15 [4]. However, cold atoms experiments rely on complex laser systems, which are needed to cool down and manipulate the atoms, and these systems are usually very sensitive to temperature fluctuations and vibrations. In addition, when operating an inertial sensor, vibrations are a major issue, as they deteriorate the performances of the instrument. This is why cold atom interferometers are usually used in ground based facilities, which provide stable enough environments. In order to carry out airborne or space-borne measurements, one has to design an instrument which is both compact and stable, and such that vibrations induced by the platform will not deteriorate the sensitivity of the sensor. We report on the operation of an atom interferometer on board a plane carrying out parabolic flights (Airbus A300 Zero-G, operated by Novespace). We have constructed a compact and stable laser setup, which is well suited for onboard applications. Our goal is to implement a dual-species Rb-K atom interferometer in order to carry out a test of the UFF in the plane. In this perspective, we are designing a dual-wavelength laser source, which will enable us to cool down and coherently manipulate the quantum states of both atoms. We have successfully tested a preliminary version of the source and obtained a double species magneto-optical trap (MOT).
Quantum technology based on cold-atom interferometers is showing great promise for fields such as inertial sensing and fundamental physics. However, the best precision achievable on Earth is limited by the free-fall time of the atoms, and their full potential can only be realized in Space where interrogation times of many seconds will lead to unprecedented sensitivity. Various mission scenarios are presently being pursued, which plan to implement matter-waves inertial sensors to detect gravitational waves, to measure the Earth gravity field or to test fundamental physics such as the Equivalence Principle.We developed a cold atom sensor experiment adapted to microgravity platforms, especially the ZERO-G plane. To achieve a test of the Universality of Free Fall, we realize the first onboard operation of simultaneous ^{87}Rb - ^{39}K interferometers in the weightlessness environment produced during parabolic flight. The large vibration levels (10 ^{-2} g/Hz ^{1/2}), acceleration range and rotation rates (5 deg/s) during flight present significant technical challenges for atom interferometers. By hybridizing each atomic sensor with a common mechanical accelerometer, we achieve a sensitivity of 3.4 10 ^{-5} g per shot-more than 1600 times below the ambient vibration level onboard the aircraft. We demonstrate the capability of our dual-quantum sensor by measuring the Eötvös parameter with systematic-limited uncertainties of 3.0 10 ^{-4} during micro-gravity. This constitutes the first quantum test of the equivalence principle in a free falling vehicle. Our results can be extended to the trajectory of a satellite for future Space missions. We also achieved a simultaneous ^{87}Rb- ^{39}K interferometer on ground with a long term stability on the differential acceleration measurement around 5 10 ^{-8}g, limited by the fall of the atom clouds. To increase the interrogation time and the sensitivity, a ZERO-G simulator has been installed in our laboratory and allows our experiment to be in free fall during 500 ms every 12 seconds, to achieve highly repeatable measurements in microgravity. We expect to increase our short-term sensitivity by two orders of magnitude, and consequently reach a long-term measurement of the Eötvös parameter at the level of 10 ^{-11}.To benefit from the free fall of the experiment completely, it is necessary to produce atoms clouds with a reduced velocity dispersion. To reach this goal, we put ^{87}Rb atoms in an optical dipole trap supplied by a compact fiber laser compliant with onboard applications and decrease the optical power on a very controlled way to obtain evaporative cooling. Preliminary results of ultra-fast evaporative cooling (less than a few seconds) onboard the ZERO-G plane allowed us to reach a regime of temperature compliant with an interrogation time of the order of one second. This method and technology will be tested on the ZERO-G simulator as well.
Atom Interferometry methods open new prospectives for absolute acceleration measurements; the quantum features of matter and the employment of atomic test masses with manipulation technique of internal and external degrees of freedom lead to a new generation of quantum sensors. In this thesis I present the development of a prototype for a transportable sensor at system and subsystem level. An instrument with such characteristics can find applications in many felds. The work has been developed in the framework of two European projects respectively oriented to the realization of an atom interferometry based absolute gravimeter for geophysical and metrological applications and to the realization of a Space Atom Interferometer for tests in micro-gravity environment. In order to focus on the possible scientific landscape I briefy illustrate in the introduction the existing devices and their characteristic performances, pointing out how the atom interferometry may represent a valid alternative leading to a new generation of quantum devices. The study, the development and the realization stages for our instrument are presented either for the laser system realization and for the the implementation of the whole apparatus. This work leads to the development of a very compact atomic physics interferometric system responding to the scientific requirements that represent our target. From the laser system side it has been realized also a complete and compact apparatus organized in a modular framework with stand alone components characterized by high working performances. This laser subsystem also includes laser sources in an external cavity configuration specially oriented to transportable apparatuses; they are characterized by an intrinsical passive stability, robustness and very narrow emission linewidth. The experience with neutral atom manipulation and with atom cooling and trapping technique has been integrated with a direct implementation, characterization and optimization of a Two Dimensional Magneto Optical Trap as a cold atoms source for an operating Atom Interferometer. Such kind of implementation represents a fundamental topic for a transportable sensor realization.
Inertial sensors based on cold atoms and light-pulse interferometry exhibit state-of-the-art sensitivity and ultra-low measurement bias that could revolutionize a variety of fields including geophysics and seismology, gravitational wave detection and fundamental tests of gravity, and inertial navigation. In the latter case, cold-atom interferometers are widely considered as breakthrough technology for future autonomous INSs. Nowadays, absolute quantum inertial sensors are available as commercial and field-deployable devices. Yet, their current size and complexity has not yet reached a technology readiness level compatible with mobile applications or plug-and-play operation by non-specialists. These systems are in desperate need of further development and miniaturization. We will present progress beyond these first experiments while exploring new methods relying on 3D matter-wave manipulation that can lead to interferometer geometries that are simultaneously sensitive to accelerations and rotations in 3D and can discern their vector components within a single measurement. These novel innovations produce additional sensitivity to rotations and gravity gradients which has not yet been exploited experimentally and could be a game changing innovation for future atomic sensors. The ability to measure the full acceleration and rotation vectors with a compact, high-precision, low-bias inertial sensor could strongly impact the fields of inertial navigation, gravity gradiometry, and gyroscopy.
A transportable atom interferometer-based gravity gradiometer has been developed at JPL to carry out measurements of Earth's gravity field at ever finer spatial resolutions, and to facilitate high-resolution monitoring of temporal variations in the gravity field from ground- and flight-based platforms. Existing satellite-based gravity missions such as CHAMP and GRACE measure the gravity field via precise monitoring of the motion of the satellites; i.e. the satellites themselves function as test masses. JPL's quantum gravity gradiometer employs a quantum phase measurement technique, similar to that employed in atomic clocks, made possible by recent advances in laser cooling and manipulation of atoms. This measurement technique is based on atomwave interferometry, and individual laser-cooled atoms are used as drag-free test masses. The quantum gravity gradiometer employs two identical atom interferometers as precision accelerometers to measure the difference in gravitational acceleration between two points (Figure 1). By using the same lasers for the manipulation of atoms in both interferometers, the accelerometers have a common reference frame and non-inertial accelerations are effectively rejected as common mode noise in the differential measurement of the gravity gradient. As a result, the dual atom interferometer-based gravity gradiometer allows gravity measurements on a moving platform, while achieving the same long-term stability of the best atomic clocks. In the laboratory-based prototype (Figure 2), the cesium atoms used in each atom interferometer are initially collected and cooled in two separate magneto-optic traps (MOTs). Each MOT, consisting of three orthogonal pairs of counter-propagating laser beams centered on a quadrupole magnetic field, collects up to 10(exp 9) atoms. These atoms are then launched vertically as in an atom fountain by switching off the magnetic field and introducing a slight frequency shift between pairs of lasers to create a moving rest frame for the trapped atoms. While still in this moving-frame molasses, the laser frequencies are further detuned from the atomic resonance (while maintaining this relative frequency shift) to cool the atom cloud's temperature to 2 K or below, corresponding to an rms velocity of less than 2 cm/s. After launch, the cold atoms undergo further state and velocity selection to prepare for atom interferometry. The atom interferometers are then realized using laser-induced stimulated Raman transitions to perform the necessary manipulations of each atom, and the resulting interferometer phase is measured using laser-induced fluorescence for state-normalized detection. More than 20 laser beams with independent controls of frequency, phase, and intensity are required for this measurement sequence. This instrument can facilitate the study of Earth's gravitational field from surface and air vehicles, as well as from space by allowing gravity mapping from a low-cost, single spacecraft mission. In addition, the operation of atom interferometer-based instruments in space offers greater sensitivity than is possible in terrestrial instruments due to the much longer interrogation times available in the microgravity environment. A space-based quantum gravity gradiometer has the potential to achieve sensitivities similar to the GRACE mission at long spatial wavelengths, and will also have resolution similar to GOCE for measurement at shorter length scales.
We present our the construction of an atom interferometer for inertial sensing in microgravity, as part of the I.C.E. (Interferometrie Coherente pour l’Espace) collaboration. On-board laser systems have been developed based on fibre-optic components, which are insensitive to mechanical vibrations and acoustic noise, have sub-MHz linewidth, and remain frequency stabilised for weeks at a time. A compact, transportable vacuum system has been built, and used for laser cooling and magneto-optical trapping. We will use a mixture of quantum degenerate gases, bosonic 87Rb and fermionic 40K, in order to find the optimal conditions for precision and sensitivity of inertial measurements. Microgravity will be realised in parabolic flights lasting up to 20s in an Airbus.
Inertial sensors based on cold atom interferometry exhibit many interesting features for applications related to inertial navigation, particularly in terms of sensitivity and long-term stability. However, at present the typical atom interferometer is still very much an experiment—consisting of a bulky, static apparatus with a limited dynamic range and high sensitivity to environmental effects. To be compliant with mobile applications further development is needed. In this work, we present a compact and mobile experiment, which we recently used to achieve the first inertial measurements with an atomic accelerometer onboard an aircraft. By integrating classical inertial sensors into our apparatus, we are able to operate the atomic sensor well beyond its standard operating range, corresponding to half of an interference fringe. We report atom-based acceleration measurements along both the horizontal and vertical axes of the aircraft with one-shot sensitivities of 2.3 × 10−4 g over a range of ∼ 0.1 g. The same technology can be used to develop cold-atom gyroscopes, which could surpass the best optical gyroscopes in terms of long-term sensitivity. Our apparatus was also designed to study multi-axis atom interferometry with the goal of realizing a full inertial measurement unit comprised of the three axes of acceleration and rotation. Finally, we present a compact and tunable laser system, which constitutes an essential part of any cold-atom-based sensor. The architecture of the laser is based on phase modulating a single fiber-optic laser diode, and can be tuned over a range of 1 GHz in less than 200 μs.