Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Optics Letters

High performance of semiconductor optical amplifier available for cold atom physics research

马千里 Qianli, 夏林 Lin Xia, 鹿博 Bo Lu, 熊伟 Wei Xiong, 张胤 Yin Zhang, 周小计 Xiaoji Zhou, Xuzong Chen

Published Jan 1, 2009• 2 citations
Publisher

Abstract

We present a novel design of a compact, stable, and easy-adjustable semiconductor optical amplifier (SOA) system.This SOA system is capable of providing up to 560-mW laser power at the wavelength of 852 nm.For the continuous-wave (CW) seeding laser, the amplification gain can reach 18 dB.We add amplitude modulation onto the CW laser and measure the modulation amplification between seeding and output laser.The amplification gain remains constant within the frequency range from 10 Hz to 1 MHz.The whole system could work in ultra-stable condition: for CW seeding laser, the fluctuation of output power is less than 0.33% in several hours.

DOI
10.3788/col20090701.0046

Related papers

Semiconductor optical amplifier-based laser system for cold-atom sensors

Eric A. Kittlaus, Jonathon Hunacek, Mahmood Bagheri +5 more

Precise control of atomic systems has led to an array of emerging 'quantum' sensor concepts ranging from Rydberg-atom RF-electric probes to cold-atom interferometer gravimeters. Looking forward, the potential impact of these technologies hinges on their capability to be adapted from laboratory-scale experiments to compact and low-power field-deployable instruments. However, existing setups typically require a bulky and power-hungry laser and optics system (LOS) to prepare, control, and interrogate the relevant atomic system using a variety of frequency-referenced and rapidly reconfigurable laser beams. In this work, we investigate the feasibility of using semiconductor optical amplifiers (SOAs) to replace high-power pump lasers and acousto-optic modulators within a simple atom cooling apparatus, looking forward to the ultimate goal of a space-deployable atom interferometer. We find that existing off-the-shelf SOA components operating at relevant wavelengths for Cs and Rb atom cooling (852 and 780 nm, respectively) are able to permit an attractive combination of rapid (sub-microsecond), high extinction ratio (>60-65 dB) switching while acting as power boosters prior to the atom physics package. These attributes enable a radically different, power-efficient approach to LOS design, reducing or eliminating the need for Watt-class laser amplifiers that are unsuitable for flight deployment. Building on these results, we construct a simple and compact all-semiconductor laser/amplifier LOS for atom cooling that is integrated with custom path-to-flight drive electronics. Up to 125 mW of total optical power is delivered to six fiber-coupled channels for magneto-optical-trap-based cooling of a cloud of neutral Cs atoms. The entire LOS, including reference and cooling laser subsystems and control electronics, occupies a volume of 20×20×15 cm and totals DC power consumption of around 13.5 W, and is designed in a modular format so that additional hardware for synthesizing atom interferometry beams may be added through future development efforts. These results indicate the utility of all-semiconductor laser systems for future low-power flyable atom-based sensor instruments.

EPJ Quantum Technology•Apr 10, 2025•7 citations

Aluminium free active region 780nm tapered semiconductor optical amplifiers for Rubidium pumping

A. Jammot, J. Bébé Manga Lobé, Marco Lamponi +6 more

Here we present a new tapered semiconductor optical amplifier (SOA) structure that exhibits more than 600 mW output power at a wavelength of 780 nm.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2013•1 citation

Highly efficient diode-pumped alkali-vapor amplification with near-extreme-limit gain

Heewoo Kim, Yujae Jeong, Kyeongjun Hwang +2 more

We report high-efficiency optical amplification with near-extreme-limit gain from a diode-pumped Cs vapor cell. We used wavelength-division multiplexing to couple 852 nm pump and 895 nm seed lasers to achieve nearly overlapping spatial modes in the Cs vapor cell. We investigated the amplification factor as a function of the focal length of the lens focusing on the combined pump and seed signals and determined the optimal focal length under our experimental conditions. The small-signal amplification factor from the Cs vapor cell reached >30 dB at 240 mW pump power, and the optimal optical amplification factor per pump power was 4171/W.

Optics Express•Jun 15, 2022•15 citations

Lasers and Amplifiers

Hans‐A. Bachor, Timothy C. Ralph

The laser is the key component in any quantum optics experiment. The performance of a laser can be described by the following parameters: optical power, spatial mode structure, output wavelength, frequency spectrum, and noise spectrum. The spatial properties of the laser beams are determined by the properties of the optical resonator. Lasers are available that produce output beams, which are very close to the theoretical limit. In order to determine the dynamics of the fluctuations of the laser system, a quantum model is required. Diode lasers use the band gap in doped semiconductor materials to produce optical gain directly from an electrical current. The chapter focuses on continuous-wave lasers since they are very common in quantum optics experiments, in precision metrology. It considers the theoretical limits to amplification of quantum limited light and discusses the theory of the non-linear interaction. The chapter discusses the measurement-based quantum amplifiers based on electro-optic feed forward and heralded devices based on photon counting.

Wiley eBooks•Jul 5, 2019•0 citations

Pulsed-pump phosphorus-doped fiber Raman amplifier around 1260 nm for applications in quantum non-linear optics

Eilon Poem, Artem Golenchenko, Omri Davidson +3 more

We describe a fiber Raman amplifier for nanosecond and sub-nanosecond pulses centered around 1260 nm. The amplification takes place inside a 4.5-m-long polarization-maintaining phosphorus-doped fiber, pumped at 1080 nm by 3-ns-long pulses with a repetition rate of 200 kHz and up to 1.75 kW peak power. The input seed pulses are of sub-mW peak-power and minimal duration of 0.25 ns, carved out of a continuous-wave laser with sub-MHz linewidth. We obtain linearly polarized output pulses with peak powers of up to 1.4 kW, corresponding to peak-power conversion efficiency of over 80%. An ultrahigh small signal gain of 90 dB is achieved, and the signal-to-noise ratio 3 dB below the saturation power is above 20 dB. No significant temporal and spectral broadening is observed for output pulses up to 400 W peak power, and broadening at higher powers can be reduced by phase modulation of the seed pulse. Thus, nearly-transform-limited pulses with peak power up to 1 kW are obtained. Finally, we demonstrate the generation of pulses with controllable frequency chirp, pulses with variable width, and double pulses. This amplifier is thus suitable for coherent control of narrow atomic resonances, especially for the fast and coherent excitation of rubidium atoms to Rydberg states. These abilities open the way towards several important applications in quantum non-linear optics.

arXiv:2007.09190•Optics Express•Sep 25, 2020•5 citations

Highly customized 1010 nm, ns-pulsed Yb-doped fiber amplifier as a key tool for on-demand single-photon generation

Oliver de Vries, Marco Plötner, Florian Christaller +9 more

The development of highly customized technical devices is a decisive feature of technically complex setups, as frequently observed in quantum experiments. This paper describes the development and realization of an Yb-doped all-fiber amplifier system designed for such a special application, more specifically, an on-demand single-photon source based on four-wave mixing with rubidium Rydberg atoms. The laser is capable of generating bandwidth-limited configurable nanosecond pulses up to peak powers of >100 W and with pulse repetition frequencies (PRF) between 50 Hz and 1 MHz at selectable wavelengths (1008-1024 nm). Especially the amplification of the 1010 nm reference seed at the lower edge of the amplification range for Yb-based fibers is challenging and tends to produce amplified spontaneous emission (ASE) at higher wavelengths. To achieve high ASE suppression, particularly at low pulse repetition frequencies, two acousto-optical modulators (AOM) are utilized both for pulse picking and for temporal filtering. The synchronization between pulse repetition frequency and AOM driver signal allows pulse amplitude fluctuations to be kept below 1%, while ASE is suppressed by at least 85 dB (PRF = 1 MHz) and 65 dB (PRF = 1 kHz).

Optics Express•May 15, 2020•9 citations
We present a novel design of a compact, stable, and easy-adjustable semiconductor optical amplifier (SOA) system.This SOA system is capable of providing up to 560-mW laser power at the wavelength of 852 nm.For the continuous-wave (CW) seeding laser, the amplification gain can reach 18 dB.We add amplitude modulation onto the CW laser and measure the modulation amplification between seeding and output laser.The amplification gain remains constant within the frequency range from 10 Hz to 1 MHz.The whole system could work in ultra-stable condition: for CW seeding laser, the fluctuation of output power is less than 0.33% in several hours.
Precise control of atomic systems has led to an array of emerging 'quantum' sensor concepts ranging from Rydberg-atom RF-electric probes to cold-atom interferometer gravimeters. Looking forward, the potential impact of these technologies hinges on their capability to be adapted from laboratory-scale experiments to compact and low-power field-deployable instruments. However, existing setups typically require a bulky and power-hungry laser and optics system (LOS) to prepare, control, and interrogate the relevant atomic system using a variety of frequency-referenced and rapidly reconfigurable laser beams. In this work, we investigate the feasibility of using semiconductor optical amplifiers (SOAs) to replace high-power pump lasers and acousto-optic modulators within a simple atom cooling apparatus, looking forward to the ultimate goal of a space-deployable atom interferometer. We find that existing off-the-shelf SOA components operating at relevant wavelengths for Cs and Rb atom cooling (852 and 780 nm, respectively) are able to permit an attractive combination of rapid (sub-microsecond), high extinction ratio (>60-65 dB) switching while acting as power boosters prior to the atom physics package. These attributes enable a radically different, power-efficient approach to LOS design, reducing or eliminating the need for Watt-class laser amplifiers that are unsuitable for flight deployment. Building on these results, we construct a simple and compact all-semiconductor laser/amplifier LOS for atom cooling that is integrated with custom path-to-flight drive electronics. Up to 125 mW of total optical power is delivered to six fiber-coupled channels for magneto-optical-trap-based cooling of a cloud of neutral Cs atoms. The entire LOS, including reference and cooling laser subsystems and control electronics, occupies a volume of 20×20×15 cm and totals DC power consumption of around 13.5 W, and is designed in a modular format so that additional hardware for synthesizing atom interferometry beams may be added through future development efforts. These results indicate the utility of all-semiconductor laser systems for future low-power flyable atom-based sensor instruments.
We report high-efficiency optical amplification with near-extreme-limit gain from a diode-pumped Cs vapor cell. We used wavelength-division multiplexing to couple 852 nm pump and 895 nm seed lasers to achieve nearly overlapping spatial modes in the Cs vapor cell. We investigated the amplification factor as a function of the focal length of the lens focusing on the combined pump and seed signals and determined the optimal focal length under our experimental conditions. The small-signal amplification factor from the Cs vapor cell reached >30 dB at 240 mW pump power, and the optimal optical amplification factor per pump power was 4171/W.
The laser is the key component in any quantum optics experiment. The performance of a laser can be described by the following parameters: optical power, spatial mode structure, output wavelength, frequency spectrum, and noise spectrum. The spatial properties of the laser beams are determined by the properties of the optical resonator. Lasers are available that produce output beams, which are very close to the theoretical limit. In order to determine the dynamics of the fluctuations of the laser system, a quantum model is required. Diode lasers use the band gap in doped semiconductor materials to produce optical gain directly from an electrical current. The chapter focuses on continuous-wave lasers since they are very common in quantum optics experiments, in precision metrology. It considers the theoretical limits to amplification of quantum limited light and discusses the theory of the non-linear interaction. The chapter discusses the measurement-based quantum amplifiers based on electro-optic feed forward and heralded devices based on photon counting.
We describe a fiber Raman amplifier for nanosecond and sub-nanosecond pulses centered around 1260 nm. The amplification takes place inside a 4.5-m-long polarization-maintaining phosphorus-doped fiber, pumped at 1080 nm by 3-ns-long pulses with a repetition rate of 200 kHz and up to 1.75 kW peak power. The input seed pulses are of sub-mW peak-power and minimal duration of 0.25 ns, carved out of a continuous-wave laser with sub-MHz linewidth. We obtain linearly polarized output pulses with peak powers of up to 1.4 kW, corresponding to peak-power conversion efficiency of over 80%. An ultrahigh small signal gain of 90 dB is achieved, and the signal-to-noise ratio 3 dB below the saturation power is above 20 dB. No significant temporal and spectral broadening is observed for output pulses up to 400 W peak power, and broadening at higher powers can be reduced by phase modulation of the seed pulse. Thus, nearly-transform-limited pulses with peak power up to 1 kW are obtained. Finally, we demonstrate the generation of pulses with controllable frequency chirp, pulses with variable width, and double pulses. This amplifier is thus suitable for coherent control of narrow atomic resonances, especially for the fast and coherent excitation of rubidium atoms to Rydberg states. These abilities open the way towards several important applications in quantum non-linear optics.
The development of highly customized technical devices is a decisive feature of technically complex setups, as frequently observed in quantum experiments. This paper describes the development and realization of an Yb-doped all-fiber amplifier system designed for such a special application, more specifically, an on-demand single-photon source based on four-wave mixing with rubidium Rydberg atoms. The laser is capable of generating bandwidth-limited configurable nanosecond pulses up to peak powers of >100 W and with pulse repetition frequencies (PRF) between 50 Hz and 1 MHz at selectable wavelengths (1008-1024 nm). Especially the amplification of the 1010 nm reference seed at the lower edge of the amplification range for Yb-based fibers is challenging and tends to produce amplified spontaneous emission (ASE) at higher wavelengths. To achieve high ASE suppression, particularly at low pulse repetition frequencies, two acousto-optical modulators (AOM) are utilized both for pulse picking and for temporal filtering. The synchronization between pulse repetition frequency and AOM driver signal allows pulse amplitude fluctuations to be kept below 1%, while ASE is suppressed by at least 85 dB (PRF = 1 MHz) and 65 dB (PRF = 1 kHz).