Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)

Highly Collimated Collinear Rb/Cs Dual-atom Beam Source

Jie Liu, Xiaofeng Li, Chao Li, Guangkun Guo, Fuyu Sun, Jie Ma, Shougang Zhang

Published Apr 1, 2019• 0 citations
Publisher

Abstract

We have designed a highly collimated collinear Rb/Cs atomic beam source device used in vacuum environment, which can be applied to both high-precision comparison measurement based on dual-atom system and dual clock. The developed device allows the separate heating of Rb and Cs atoms, and making the operation mode (Rb mode and/or Cs mode) selectable. During operation, Rb and/or Cs atoms are ejected from the same collimating channel, implying that the travelling paths of the two atomic beams overlap precisely. This is very useful and particularly important for dual-atom system, since the environment of the same temperature field and static magnetic field are achieved while the two atoms interact with microwaves. We will discuss the specific application in dual Rb/Cs beam clocks and demonstrate how the dual beam source works in our dual clock.

DOI
10.1109/fcs.2019.8856041

Related papers

Dual-mode Ramsey cavity for a dual Rb/Cs atomic clock

Fuyu Sun, Xianhe Huang, Qingsong Bai

In this paper, we propose a dual-mode Ramsey cavity for a dual Rb/Cs atomic clock, with resonances at 6.83GHz and 9.19GHz under the two different operating modes, respectively. Thus, the proposed cavity can excite Rb atoms and Cs atoms clock transition in the same environment (e.g., static magnetic field, temperature, and/or the asymmetric length between the two arms due to a single U-shaped structure). This design provides a compact physical package for a dual Rb/Cs clock. Another potential application of the dual-mode is high-accuracy comparison measurement. As an example, a dual-mode cavity with TE105 and TE109 modes was simulated.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2016•3 citations

Dual‐mode Ramsey microwave cavity for a dual Rb/Cs atomic clock

Guangkun Guo, Jie Liu, Dong Hou +5 more

As one of the crucial elements of microwave (MW) atomic clocks, Ramsey MW cavities are crucial for assisting MW–atom interactions. A dual‐mode Ramsey cavity for a dual Rb/Cs atomic clock with simultaneous resonances at 6.83 and 9.19 GHz is presented here. The reported cavity, with its high mechanical strength and stability, can excite clock transitions in Rb and Cs atoms in the same zones, thereby providing a compact physical package for a dual Rb/Cs clock. Since both atoms are in the same MW–atom interaction environment, this measurement platform allows for high‐accuracy comparisons.

Electronics Letters•Apr 5, 2018•10 citations

Collimated versatile atomic beam source with alkali dispensers

Bochao Wei, Alexandra Crawford, Yorick Andeweg +3 more

Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 °C) is undesirable for many applications, as it shifts the atomic speed distribution to higher values and presents a radiative heat source that can raise the temperature of its surroundings. For this reason, dispensers are typically not used in line-of-sight applications, such as atomic beam generation. In this work, we present an integrated rubidium dispenser collimating device with a thickness of only 2 mm that produces a beam of atoms traveling primarily in the forward direction. We find that the collimator plate serves to both shield the dispenser's radiation and moderate the velocity of the atomic beam so that the measured longitudinal speed distribution is comparable to that of an ordinary alkali oven at only a slightly elevated temperature of 200 °C. To confirm our theory, we also constructed another compact apparatus consisting of a dispenser and a silicon collimator and the measurements support our conclusion. Our integrated dispenser collimator will particularly be useful in integrated photonics and cavity QED on-chip, where a localized, directed source of Rb vapor in small quantities is needed.

arXiv:2202.07076•Applied Physics Letters•Apr 4, 2022•7 citations

Generation of a high-flux and collimated rubidium beam source

Xiangxiang Lu, Qianyun Zhao, Chuang Pei +3 more

A high-flux and collimated atomic beam source has important application in the fields of high precision rotation measurement and atomic clocks. Starting from the principle of atomic interference measurement, the need of atom interference gyroscope for performance parameters of a rubidium beam source is briefly introduced in this paper. An atomic beam generation method that uses micro-channel stainless arrays with a length-diameter ratio of 100:1 is proposed, which is used to support the parameter design and verification system construction. A preliminary parameter characterization is performed, with a peak atomic flux of$2.1\times 10^{12}\text{atoms}/\mathrm{s}$and a full divergence angle of 16 mrad. The test results agree well with theoretical calculation, and the slight difference results from atom-wall collision. A$\pi/2-\pi/2$Ramsey interferometer with an interval of 200 mm is also constructed and characterized with two phase-coherent Raman beams, which proves good coherence of the atom beam, and thus pave the way to high-sensitivity atom interferometry measurements.

International Conference on Ocean Studies (ICOS)•Oct 3, 2023•0 citations

A Compact Dual-Beam Zeeman Slower for High-Flux Cold Atoms

Chen Chen, Kejun Liu, Dezhou Deng +6 more

We present a compact design of dual-beam Zeeman slower optimized for efficient production of cold atom applications. Traditional single-beam configurations face challenges from substantial residual atomic flux impacting downstream optical windows, resulting in increased system size, atomic deposition contamination, and a reduced operational lifetime. Our approach employs two oblique laser beams and a capillary-array collimation system to address these challenges while maintaining efficient deceleration. For rubidium ($^{87}$Rb), simulations demonstrate a significant increase in the fraction of atoms captured by a two-dimensional magneto-optical trap (2D-MOT) and nearly eliminate atom-induced contamination probability at optical windows, all within a compact Zeeman slower length of 44 cm. Experimental validation with Rb and Yb demonstrates highly efficient atomic loading within the same compact design. This advancement represents a substantial improvement for high-flux cold atom applications, providing reliable performance for high-precision metrology, quantum computation and simulation.

physics.atom-phCross-listedarXiv:2511.08193•Physical Review Applied•Nov 12, 2025•2 citations

Cascaded collimator for atomic beams traveling in planar silicon devices

Chao Li, Xiao Chai, Bochao Wei +4 more

Micro- and increasingly, nano-fabrication have enabled the miniaturization of atomic devices, from vapor cells to atom chips for Bose-Einstein condensation. Here we present microfabricated planar devices for thermal atomic beams. Etched microchannels were used to create highly collimated, continuous rubidium atom beams traveling parallel to a silicon wafer surface. Precise, lithographic definition of the guiding channels allowed for shaping and tailoring the velocity distributions in ways not possible using conventional machining. Multiple miniature beams with individually prescribed geometries were created, including collimated, focusing and diverging outputs. A "cascaded" collimator was realized with 40 times greater purity than conventional collimators. These localized, miniature atom beam sources can be a valuable resource for a number of quantum technologies, including atom interferometers, clocks, Rydberg atoms, and hybrid atom-nanophotonic systems, as well as enabling controlled studies of atom-surface interactions at the nanometer scale.

Nature Communications•Apr 23, 2019•33 citations
We have designed a highly collimated collinear Rb/Cs atomic beam source device used in vacuum environment, which can be applied to both high-precision comparison measurement based on dual-atom system and dual clock. The developed device allows the separate heating of Rb and Cs atoms, and making the operation mode (Rb mode and/or Cs mode) selectable. During operation, Rb and/or Cs atoms are ejected from the same collimating channel, implying that the travelling paths of the two atomic beams overlap precisely. This is very useful and particularly important for dual-atom system, since the environment of the same temperature field and static magnetic field are achieved while the two atoms interact with microwaves. We will discuss the specific application in dual Rb/Cs beam clocks and demonstrate how the dual beam source works in our dual clock.
In this paper, we propose a dual-mode Ramsey cavity for a dual Rb/Cs atomic clock, with resonances at 6.83GHz and 9.19GHz under the two different operating modes, respectively. Thus, the proposed cavity can excite Rb atoms and Cs atoms clock transition in the same environment (e.g., static magnetic field, temperature, and/or the asymmetric length between the two arms due to a single U-shaped structure). This design provides a compact physical package for a dual Rb/Cs clock. Another potential application of the dual-mode is high-accuracy comparison measurement. As an example, a dual-mode cavity with TE105 and TE109 modes was simulated.
As one of the crucial elements of microwave (MW) atomic clocks, Ramsey MW cavities are crucial for assisting MW–atom interactions. A dual‐mode Ramsey cavity for a dual Rb/Cs atomic clock with simultaneous resonances at 6.83 and 9.19 GHz is presented here. The reported cavity, with its high mechanical strength and stability, can excite clock transitions in Rb and Cs atoms in the same zones, thereby providing a compact physical package for a dual Rb/Cs clock. Since both atoms are in the same MW–atom interaction environment, this measurement platform allows for high‐accuracy comparisons.
Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 °C) is undesirable for many applications, as it shifts the atomic speed distribution to higher values and presents a radiative heat source that can raise the temperature of its surroundings. For this reason, dispensers are typically not used in line-of-sight applications, such as atomic beam generation. In this work, we present an integrated rubidium dispenser collimating device with a thickness of only 2 mm that produces a beam of atoms traveling primarily in the forward direction. We find that the collimator plate serves to both shield the dispenser's radiation and moderate the velocity of the atomic beam so that the measured longitudinal speed distribution is comparable to that of an ordinary alkali oven at only a slightly elevated temperature of 200 °C. To confirm our theory, we also constructed another compact apparatus consisting of a dispenser and a silicon collimator and the measurements support our conclusion. Our integrated dispenser collimator will particularly be useful in integrated photonics and cavity QED on-chip, where a localized, directed source of Rb vapor in small quantities is needed.
A high-flux and collimated atomic beam source has important application in the fields of high precision rotation measurement and atomic clocks. Starting from the principle of atomic interference measurement, the need of atom interference gyroscope for performance parameters of a rubidium beam source is briefly introduced in this paper. An atomic beam generation method that uses micro-channel stainless arrays with a length-diameter ratio of 100:1 is proposed, which is used to support the parameter design and verification system construction. A preliminary parameter characterization is performed, with a peak atomic flux of2.1×1012atoms/s2.1\times 10^{12}\text{atoms}/\mathrm{s}2.1×1012atoms/sand a full divergence angle of 16 mrad. The test results agree well with theoretical calculation, and the slight difference results from atom-wall collision. Aπ/2−π/2\pi/2-\pi/2π/2−π/2Ramsey interferometer with an interval of 200 mm is also constructed and characterized with two phase-coherent Raman beams, which proves good coherence of the atom beam, and thus pave the way to high-sensitivity atom interferometry measurements.
We present a compact design of dual-beam Zeeman slower optimized for efficient production of cold atom applications. Traditional single-beam configurations face challenges from substantial residual atomic flux impacting downstream optical windows, resulting in increased system size, atomic deposition contamination, and a reduced operational lifetime. Our approach employs two oblique laser beams and a capillary-array collimation system to address these challenges while maintaining efficient deceleration. For rubidium (87^{87}87Rb), simulations demonstrate a significant increase in the fraction of atoms captured by a two-dimensional magneto-optical trap (2D-MOT) and nearly eliminate atom-induced contamination probability at optical windows, all within a compact Zeeman slower length of 44 cm. Experimental validation with Rb and Yb demonstrates highly efficient atomic loading within the same compact design. This advancement represents a substantial improvement for high-flux cold atom applications, providing reliable performance for high-precision metrology, quantum computation and simulation.
Micro- and increasingly, nano-fabrication have enabled the miniaturization of atomic devices, from vapor cells to atom chips for Bose-Einstein condensation. Here we present microfabricated planar devices for thermal atomic beams. Etched microchannels were used to create highly collimated, continuous rubidium atom beams traveling parallel to a silicon wafer surface. Precise, lithographic definition of the guiding channels allowed for shaping and tailoring the velocity distributions in ways not possible using conventional machining. Multiple miniature beams with individually prescribed geometries were created, including collimated, focusing and diverging outputs. A "cascaded" collimator was realized with 40 times greater purity than conventional collimators. These localized, miniature atom beam sources can be a valuable resource for a number of quantum technologies, including atom interferometers, clocks, Rydberg atoms, and hybrid atom-nanophotonic systems, as well as enabling controlled studies of atom-surface interactions at the nanometer scale.