Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Effect of Post Deposition Annealing on the Structural and Electrical Properties of NbTiN Thin Films Deposited by Reactive Bias Target Ion Beam Deposition Technique

Tannaz Farrahi, Michael E. Cyberey, Michael B. Eller, Arthur W. Lichtenberger

Published May 9, 2019• 9 citations
Publisher

Abstract

Nb-based superconducting alloys, such as NbN and NbTiN, can have a superconducting energy gap near twice that of elemental Nb, thus, being ideal candidates for low-loss superconducting circuits operating above the gap frequency of Nb. We are particularly interested in these materials for THz-frequency superconducting-insulating-superconducting (SIS) mixers, kinetic inductance detectors, and traveling wave kinetic inductance parametric amplifier devices. We recently reported the use of an alternative synthesis technique, reactive bias target ion beam deposition (RBTIBD), used to realize high-quality NbTiN films and high-energy gap NbTiN/AlN/NbTiN SIS heterostructures. In this paper, the effect of post-deposition annealing on the electrical and structural properties of room temperature deposited RBTIBD NbTiN was investigated. Our room temperature RBTIBD NbTiN films were annealed using rapid thermal annealing from 200 to 1000 °C. The change in structural and electrical properties was characterized by X-ray diffraction, atomic force microscopy, and four-point probe measurements. The annealed films demonstrated an enhancement in transition temperature (Tc), increased crystallinity, larger grain size, and significantly reduced intrinsic stress.

DOI
10.1109/tasc.2019.2910024

Related papers

Growth and Characterization of NbTiN Films Synthesized by Reactive Bias Target Ion Beam Deposition (RBTIBD)

Michael E. Cyberey, Tannaz Farrahi, Michael B. Eller +4 more

High energy gap Nb-based superconducting alloys with low normal state resistivity are fundamentally important for realization of low-loss high frequency circuits operating above the typical ~670 GHz gap frequency of elemental Nb. NbTiN has been shown to have a superconducting energy gap nearly twice that of elemental Nb, and is emerging as an important material for various detector and superconducting computing technologies. In this paper, we report on the growth of high-quality face-centered cubic (FCC) NbTiN films through the use of an alternative materials deposition technology-reactive bias target ion beam deposition. This novel technique offers more degrees of freedom compared to conventional sputtering, notably through decoupling the plasma generation and target bias, through use of a hollow-cathode ion source and independently pulse biased sputtering targets. The reported films are of high quality, with increased transition temperatures, reduced normal state resistivity, and surface roughness, compared to our previously reported reactive magnetron sputtered NbTiN films. In particular, at UVA, we are investigating these NbTiN films for wide-bandgap all-NbTiN superconducting-insulating-superconducting mixers, kinetic inductance detectors, and traveling-wave kinetic inductance parametric amplifier devices.

IEEE Transactions on Applied Superconductivity•Apr 27, 2019•5 citations

Effect of Rapid Thermal Annealing on the Superconductivity of ALD-Grown TiN thin films

Z. Sadirkhanov, A. Tuigynbek, M. Surendran +5 more

Titanium nitride (TiN) is a promising superconducting material for scalable quantum technologies owing to its tunable kinetic inductance and compatibility with CMOS thin-film processing. However, the superconducting performance of atomic-layer-deposited TiN can be degraded by oxygen incorporation, off-stoichiometry, and crystallographic disorder. In this work, we investigate rapid thermal annealing (RTA) in high-purity nitrogen as a post-deposition strategy to improve polycrystalline TiN films grown by RF-biased plasma-enhanced atomic layer deposition. Grazing-incidence X-ray diffraction reveals reduced peak broadening, a smaller lattice parameter, and a stronger (111) preferred orientation with increasing annealing temperature. X-ray photoelectron spectroscopy depth profiling shows reduced oxygen-related bonding and a shift toward a Ti--N-dominated chemical environment after annealing. These structural and chemical changes result in a 25% increase in the superconducting transition temperature and a significant narrowing of the transition width. Annealing also reduced the sheet resistance and the estimated sheet kinetic inductance, increased the residual resistance ratio, and improved the magnetic-field tolerance. Together, the structural, chemical, and transport results are consistent with reduced material disorder and improved superconducting uniformity. Because RTA is a relatively low thermal budget and is a semiconductor fabrication compatible process, it offers a practical route to improve the quality of ALD-grown TiN for superconducting applications.

arXiv:2611.00424•Oct 30, 2026•0 citations

Tunable superconductivity in NbTiN thin films: Influence of growth temperature on fluctuation dynamics and quantum applicability

Pratiksha Pratap, Laxmipriya Nanda, Satyendra Singh +3 more

Abstract In this report, we present the superconducting properties of NbTiN films grown by reactive DC magnetron sputtering on MgO substrates. The films were deposited at room temperature, 300 °C, and 600 o C to study the effect of deposition temperature on crystalline structure and superconducting behavior. Superconducting parameters such as transition temperature (T c ), coherence length ( ξ (0)), and upper critical field (B C2 (0)) were obtained from resistance–temperature measurements. A clear dependence of structural and superconducting properties on deposition temperature was observed. Resistance–temperature data were analyzed using Aslamazov–Larkin (AL) and Lowest Landau Level (LLL) scaling theories to describe the superconducting fluctuation mechanism. Magnetoconductance curves extracted from magnetoresistance (MR) measurements were analyzed within the AL + MT fluctuation framework to estimate the dephasing time ( τ ϕ ) in the picosecond range. All these findings are crucial for understanding the response and recovery time of superconducting single-photon detectors. The successful growth and robust parameters of high-temperature-deposited NbTiN films indicate their potential for superconducting photon detectors, kinetic inductance detectors, and other quantum applications.

Physica Scripta•Nov 24, 2025•0 citations

SuperGaN: Synthesis of NbTiN/GaN/NbTiN Tunnel Junctions

Michael E. Cyberey, Scott Hinton, Christopher W. Moore +2 more

Nb-based circuits have broad applications in quantum-limited photon detectors, low-noise parametric amplifiers, superconducting digital logic circuits, and low-loss circuits for quantum computing. The current state-of-the-art approach for superconductor-insulator-superconductor (SIS) junction material is the Gurvitch trilayer process based on magnetron sputtering of Nb electrodes with Al-Oxide or AlN tunnel barriers grown on an Al overlayer [1]. However, a current limitation of elemental Nb-based circuits is the low-loss operation of THz circuits operating above the 670 GHz gap frequency of Nb and operation at higher temperatures for projects with a strict power budget, such as space-based applications. NbTiN is an alternative higher energy gap material and we have previously reported on the first NbTiN/AlN/NbTiN superconducting-insulating-superconducting (SIS) junctions with an epitaxially grown AlN tunnel barrier [2]. One drawback of a directly grown tunnel barrier compared to thermal oxidation is control of the barrier thickness and the uniformity of thickness across a substrate, leading to variations in current density (Jc). Semiconductor barriers with smaller barrier heights enable thicker tunnel barriers for a given Jc[3]. GaN is an alternative semiconductor material with a closed-packed Wurtzite crystal structure similar to AlN and it can be epitaxially grown as a tunnel barrier using the Reactive Bias Target Ion Beam Deposition (RBTIBD) technique. This work presents the preliminary results of the first reported high-quality NbTiN/GaN/NbTiN heterojunctions with underdamped SIS I(V) characteristics

arXiv:2309.15100•IEEE Transactions on Applied Superconductivity•Nov 30, 2023•4 citations

Low-Temperature Stabilization of $δ$-NbN Superconducting Thin Films through Energy-Selective Ion Beam Sputtering

Yifan Liu, Junwoo Lee, Mingyu Xu +3 more

Achieving high-quality superconducting thin films at low temperatures is a central challenge for scalable quantum device integration and Complementary Metal-Oxide-Semiconductor (CMOS)-compatible fabrication. Here, we demonstrate a room-temperature magnetron sputtering approach for synthesizing niobium nitride (NbN) thin films using a novel energy-selective ion source that enables independent control of ion energy and ion flux. This capability provides a powerful route to precisely tailor surface kinetics and crystallization pathways, overcoming longstanding limitations in stabilizing high-quality NbN at reduced temperatures. The resulting films were characterized by superconducting transport measurements, X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. Compared with conventional reactive sputtering, ion beam-assisted growth yields a substantial narrowing of the transition width at the superconducting temperature, indicating improved phase purity and electronic homogeneity. Furthermore, this work introduces energy-selective ion control as a general, non-equilibrium route to stabilize metastable superconducting phases at low temperatures, offering a new design paradigm for thin-film quantum materials.

arXiv:2609.35091•Sep 28, 2026•0 citations

NbTiN thin films for superconducting photon detectors on photonic and two-dimensional materials

Stephan Steinhauer, Lily Yang, Samuel Gyger +7 more

Integration of superconducting devices on photonic platforms opens up a wide range of functionalities and applications. We report on NbTiN thin films deposited on SiO2, Si3N4, GaAs, LiNbO3, and AlN as well as on a monolayer of hexagonal boron nitride, using a universal reactive co-sputtering recipe. The morphology and the superconducting properties of the NbTiN thin films with a thickness of 10 nm were characterized by atomic force microscopy and electrical transport measurements. Superconducting strip photon detectors were fabricated using a design suitable for waveguide integration and compared in terms of their internal quantum efficiency and detection pulse kinetics. Our results show well-comparable performances for detectors integrated on different platforms, while also demonstrating that reactive co-sputter deposition of NbTiN at room temperature provides a robust method for realizing superconducting devices on various materials.

Applied Physics Letters•Apr 27, 2020•45 citations
Nb-based superconducting alloys, such as NbN and NbTiN, can have a superconducting energy gap near twice that of elemental Nb, thus, being ideal candidates for low-loss superconducting circuits operating above the gap frequency of Nb. We are particularly interested in these materials for THz-frequency superconducting-insulating-superconducting (SIS) mixers, kinetic inductance detectors, and traveling wave kinetic inductance parametric amplifier devices. We recently reported the use of an alternative synthesis technique, reactive bias target ion beam deposition (RBTIBD), used to realize high-quality NbTiN films and high-energy gap NbTiN/AlN/NbTiN SIS heterostructures. In this paper, the effect of post-deposition annealing on the electrical and structural properties of room temperature deposited RBTIBD NbTiN was investigated. Our room temperature RBTIBD NbTiN films were annealed using rapid thermal annealing from 200 to 1000 °C. The change in structural and electrical properties was characterized by X-ray diffraction, atomic force microscopy, and four-point probe measurements. The annealed films demonstrated an enhancement in transition temperature (Tc), increased crystallinity, larger grain size, and significantly reduced intrinsic stress.
High energy gap Nb-based superconducting alloys with low normal state resistivity are fundamentally important for realization of low-loss high frequency circuits operating above the typical ~670 GHz gap frequency of elemental Nb. NbTiN has been shown to have a superconducting energy gap nearly twice that of elemental Nb, and is emerging as an important material for various detector and superconducting computing technologies. In this paper, we report on the growth of high-quality face-centered cubic (FCC) NbTiN films through the use of an alternative materials deposition technology-reactive bias target ion beam deposition. This novel technique offers more degrees of freedom compared to conventional sputtering, notably through decoupling the plasma generation and target bias, through use of a hollow-cathode ion source and independently pulse biased sputtering targets. The reported films are of high quality, with increased transition temperatures, reduced normal state resistivity, and surface roughness, compared to our previously reported reactive magnetron sputtered NbTiN films. In particular, at UVA, we are investigating these NbTiN films for wide-bandgap all-NbTiN superconducting-insulating-superconducting mixers, kinetic inductance detectors, and traveling-wave kinetic inductance parametric amplifier devices.
Titanium nitride (TiN) is a promising superconducting material for scalable quantum technologies owing to its tunable kinetic inductance and compatibility with CMOS thin-film processing. However, the superconducting performance of atomic-layer-deposited TiN can be degraded by oxygen incorporation, off-stoichiometry, and crystallographic disorder. In this work, we investigate rapid thermal annealing (RTA) in high-purity nitrogen as a post-deposition strategy to improve polycrystalline TiN films grown by RF-biased plasma-enhanced atomic layer deposition. Grazing-incidence X-ray diffraction reveals reduced peak broadening, a smaller lattice parameter, and a stronger (111) preferred orientation with increasing annealing temperature. X-ray photoelectron spectroscopy depth profiling shows reduced oxygen-related bonding and a shift toward a Ti--N-dominated chemical environment after annealing. These structural and chemical changes result in a 25% increase in the superconducting transition temperature and a significant narrowing of the transition width. Annealing also reduced the sheet resistance and the estimated sheet kinetic inductance, increased the residual resistance ratio, and improved the magnetic-field tolerance. Together, the structural, chemical, and transport results are consistent with reduced material disorder and improved superconducting uniformity. Because RTA is a relatively low thermal budget and is a semiconductor fabrication compatible process, it offers a practical route to improve the quality of ALD-grown TiN for superconducting applications.
Abstract In this report, we present the superconducting properties of NbTiN films grown by reactive DC magnetron sputtering on MgO substrates. The films were deposited at room temperature, 300 °C, and 600 o C to study the effect of deposition temperature on crystalline structure and superconducting behavior. Superconducting parameters such as transition temperature (T c ), coherence length ( ξ (0)), and upper critical field (B C2 (0)) were obtained from resistance–temperature measurements. A clear dependence of structural and superconducting properties on deposition temperature was observed. Resistance–temperature data were analyzed using Aslamazov–Larkin (AL) and Lowest Landau Level (LLL) scaling theories to describe the superconducting fluctuation mechanism. Magnetoconductance curves extracted from magnetoresistance (MR) measurements were analyzed within the AL + MT fluctuation framework to estimate the dephasing time ( τ ϕ ) in the picosecond range. All these findings are crucial for understanding the response and recovery time of superconducting single-photon detectors. The successful growth and robust parameters of high-temperature-deposited NbTiN films indicate their potential for superconducting photon detectors, kinetic inductance detectors, and other quantum applications.
Nb-based circuits have broad applications in quantum-limited photon detectors, low-noise parametric amplifiers, superconducting digital logic circuits, and low-loss circuits for quantum computing. The current state-of-the-art approach for superconductor-insulator-superconductor (SIS) junction material is the Gurvitch trilayer process based on magnetron sputtering of Nb electrodes with Al-Oxide or AlN tunnel barriers grown on an Al overlayer [1]. However, a current limitation of elemental Nb-based circuits is the low-loss operation of THz circuits operating above the 670 GHz gap frequency of Nb and operation at higher temperatures for projects with a strict power budget, such as space-based applications. NbTiN is an alternative higher energy gap material and we have previously reported on the first NbTiN/AlN/NbTiN superconducting-insulating-superconducting (SIS) junctions with an epitaxially grown AlN tunnel barrier [2]. One drawback of a directly grown tunnel barrier compared to thermal oxidation is control of the barrier thickness and the uniformity of thickness across a substrate, leading to variations in current density (Jc). Semiconductor barriers with smaller barrier heights enable thicker tunnel barriers for a given Jc[3]. GaN is an alternative semiconductor material with a closed-packed Wurtzite crystal structure similar to AlN and it can be epitaxially grown as a tunnel barrier using the Reactive Bias Target Ion Beam Deposition (RBTIBD) technique. This work presents the preliminary results of the first reported high-quality NbTiN/GaN/NbTiN heterojunctions with underdamped SIS I(V) characteristics
Low-Temperature Stabilization of δδδ-NbN Superconducting Thin Films through Energy-Selective Ion Beam Sputtering
Achieving high-quality superconducting thin films at low temperatures is a central challenge for scalable quantum device integration and Complementary Metal-Oxide-Semiconductor (CMOS)-compatible fabrication. Here, we demonstrate a room-temperature magnetron sputtering approach for synthesizing niobium nitride (NbN) thin films using a novel energy-selective ion source that enables independent control of ion energy and ion flux. This capability provides a powerful route to precisely tailor surface kinetics and crystallization pathways, overcoming longstanding limitations in stabilizing high-quality NbN at reduced temperatures. The resulting films were characterized by superconducting transport measurements, X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. Compared with conventional reactive sputtering, ion beam-assisted growth yields a substantial narrowing of the transition width at the superconducting temperature, indicating improved phase purity and electronic homogeneity. Furthermore, this work introduces energy-selective ion control as a general, non-equilibrium route to stabilize metastable superconducting phases at low temperatures, offering a new design paradigm for thin-film quantum materials.
Integration of superconducting devices on photonic platforms opens up a wide range of functionalities and applications. We report on NbTiN thin films deposited on SiO2, Si3N4, GaAs, LiNbO3, and AlN as well as on a monolayer of hexagonal boron nitride, using a universal reactive co-sputtering recipe. The morphology and the superconducting properties of the NbTiN thin films with a thickness of 10 nm were characterized by atomic force microscopy and electrical transport measurements. Superconducting strip photon detectors were fabricated using a design suitable for waveguide integration and compared in terms of their internal quantum efficiency and detection pulse kinetics. Our results show well-comparable performances for detectors integrated on different platforms, while also demonstrating that reactive co-sputter deposition of NbTiN at room temperature provides a robust method for realizing superconducting devices on various materials.