Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

NbTiN thin films for superconducting photon detectors on photonic and two-dimensional materials

Stephan Steinhauer, Lily Yang, Samuel Gyger, Thomas Lettner, Carlos Errando-Herranz, Klaus D. Jöns, Mohammad Amin Baghban, Katia Gallo, Julien Zichi, Val Zwiller

Published Apr 27, 2020• 45 citations
Publisher

Abstract

Integration of superconducting devices on photonic platforms opens up a wide range of functionalities and applications. We report on NbTiN thin films deposited on SiO2, Si3N4, GaAs, LiNbO3, and AlN as well as on a monolayer of hexagonal boron nitride, using a universal reactive co-sputtering recipe. The morphology and the superconducting properties of the NbTiN thin films with a thickness of 10 nm were characterized by atomic force microscopy and electrical transport measurements. Superconducting strip photon detectors were fabricated using a design suitable for waveguide integration and compared in terms of their internal quantum efficiency and detection pulse kinetics. Our results show well-comparable performances for detectors integrated on different platforms, while also demonstrating that reactive co-sputter deposition of NbTiN at room temperature provides a robust method for realizing superconducting devices on various materials.

DOI
10.1063/1.5143986

Related papers

Superconducting single-photon detectors based on ultrathin NbTiN films

Stephan Steinhauer, Samuel Gyger, Bruno Lopez-Rodriguez +5 more

Superconducting single-photon detectors (SSPDs) have developed into a mature device technology and excel due outstanding performance metrics, in particular high detection efficiency combined with high time resolution and low dark count rate for a wide wavelength range from the visible to the mid-infrared. In addition to commercially available systems with devices coupled to optical fibers, SSPDs can be integrated with photonic circuits using scalable nanofabrication technologies. Here, we will present recent progress on SSPDs based on NbTiN thin films and their integration on different photonic material platforms. Our process for NbTiN growth at room temperature will be described, using magnetron reactive co-sputtering to achieve high-quality superconducting layers down to thicknesses of few nanometres. Optimized SSPD devices are realized by tuning the superconducting properties of NbTiN thin films, adjusting the material composition and nanocrystalline structure. The realization of different types of detectors and geometries will be shown, including nanofabrication techniques for achieving fully suspended nanowire structures. Furthermore, we will discuss challenges and prospects for scaling-up SSPD device technology as well as detector systems. Multiplexing schemes such as dispersion engineering of superconducting transmission lines will be highlighted as powerful approach to address multiple detectors and reduce the number of required feedthroughs and electrical lines in the cryostat. Eventually, exemplary applications of SSPDs for photon counting in quantum optics and light detection and ranging (LIDAR) will be outlined.

Quantum Optics and Photon Counting•Apr 14, 2021•0 citations

Ultrathin NbN Films for Superconducting Single-Photon Detectors

Wojciech Słysz, M. Guziewicz, Michal Adam Borysiewicz +11 more

We present our research on fabrication and structural and transport characterization of ultrathin superconducting NbN layers deposited on both single-crystal Al2O3 and Si wafers, and SiO2 and Si3N4 buffer layers grown directly on Si wafers.The thicknesses of our films varied from 6 nm to 50 nm and they were grown using reactive RF magnetron sputtering on substrates maintained at the temperature 850 • C. We have performed extensive morphology characterization of our films using the X-ray diffraction method and atomic force microscopy, and related the results to the type of the substrate used for the film deposition.Our transport measurements showed that even the thinnest, 6 nm thick NbN films had the superconducting critical temperature of 10-12 K, which was increased to 14 K for thicker films.

Acta Physica Polonica A•Jul 1, 2011•14 citations

Sputtered NbN films for ultrahigh performance superconducting nanowire single-photon detectors

Ilya A. Stepanov, Aleksandr S. Baburin, Danil V. Kushnev +7 more

At the present time, ultrahigh performance superconducting nanowire single-photon detectors are the key elements in a variety of devices from biological research to quantum communications and computing. Accurate tuning of superconducting material properties is a powerful resource for fabricating single-photon detectors with desired properties. Here, we report on the major theoretical relations between ultrathin niobium nitride (NbN) film properties and superconducting nanowire single-photon detector characteristics, as well as the dependence of ultrathin NbN film properties on reactive magnetron sputtering recipes. Based on this study, we formulate the exact requirements for ultrathin NbN films for ultrahigh performance superconducting nanowire single-photon detectors. Then, we experimentally studied the properties of ultrathin NbN films (morphology, crystalline structure, critical temperature, and sheet resistance) on silicon, sapphire, silicon dioxide, and silicon nitride substrates sputtered with various recipes. We demonstrate ultrathin NbN films (obtained with more than 100 films deposition) with a wide range of critical temperature from 2.5 to 12.1 K and sheet resistance from 285 to 2000 Ω/sq and report a sheet resistance evolution of more than 40% within two years. Finally, we found out that one should use ultrathin NbN films with a specific critical temperature near 9.5 K and a sheet resistance of about 350 Ω/sq for ultrahigh performance state-of-the-art superconducting nanowire single-photon detectors at 1550 nm wavelength.

arXiv:2311.17000•APL Materials•Feb 1, 2024•18 citations

Characterization of NbTiN Thin Films for Waveguide-Integrated Superconducting Nanowire Detectors

Aadit Sharma, Lan Hoang, Erika M. Sommer +16 more

Quantum photonic integrated circuits represent a promising pathway for advancing quantum technologies, but their realization hinges on efficient on-chip detection of single photons. Superconducting nanowire single-photon detectors (SNSPDs) based on NbTiN offer high detection efficiencies and low jitter. Yet, integration challenges persist, especially on platforms like GaAs. In particular, very limited data exist about the optical properties of NbTiN. This letter reports on measurements of structural and optical properties of NbTiN thin films deposited on GaAs and Si substrates.

IEEE Photonics Technology Letters•Jul 13, 2026•0 citations

High-temperature growth of ultra thin NbTiN films on lithium niobate for integrated single photon detection

Sjoerd Telkamp, Odiel Hooybergs, Myriam Rihani +9 more

Lithium niobate-on-insulator (LNOI) is an emerging photonic platform with high potential for scalable quantum information processing due to its strong second-order nonlinearity. However, little progress has been made in developing on-chip single-photon detectors on LNOI. Niobium tita nium nitride (NbTiN) superconducting nanowire single-photon detectors (SNSPDs) are a promising candidate for this application. In this work, we use DC reactive magnetron sputtering to grow high quality NbTiN thin films using an ultra-high vacuum deposition system with a base pressure lower than 2×10‾¹⁰ mbar. Enabled by the low concentration of background impurities in this system, we investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature (Tc) of 12.3 K grown at a substrate temperature of 825 K. We find that the NbTiN films grow in the (111) orientation and evolve from a porous pillar structure when grown at low temperatures to densely packed fibrous grains at higher temper atures. Furthermore, we demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LNOI platform and investigate the obtained interface quality. Lastly, we fabricate SNSPDs from the NbTiN film on LNOI and characterize the detector performance.

•Sep 9, 2025•0 citations

High-temperature growth of ultra thin NbTiN films on lithium niobate for integrated single photon detection

Sjoerd Telkamp, Odiel Hooybergs, Myriam Rihani +9 more

Lithium niobate-on-insulator (LNOI) is an emerging photonic platform with high potential for scalable quantum information processing due to its strong second-order nonlinearity. However, little progress has been made in developing on-chip single-photon detectors on LNOI. Niobium titanium nitride (NbTiN) superconducting nanowire single-photon detectors (SNSPDs) are a promising candidate for this application. In this work, we use DC reactive magnetron sputtering to grow high-quality NbTiN thin films using an ultrahigh vacuum deposition system with a base pressure lower than 2 × 10 − 10 mbar. Enabled by the low concentration of background impurities in this system, we investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature ( T c ) of 12.3 K grown at a substrate temperature of 825 K. We find that the NbTiN films grow in the (111) orientation and evolve from a porous pillar structure when grown at low temperatures to densely packed fibrous grains at higher temperatures. Furthermore, we demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LNOI platform and investigate the obtained interface quality. Lastly, we fabricate SNSPDs from the NbTiN film on LNOI and characterize the detector performance.

arXiv:2509.07870•Physical Review Materials•Jun 22, 2026•2 citations
Integration of superconducting devices on photonic platforms opens up a wide range of functionalities and applications. We report on NbTiN thin films deposited on SiO2, Si3N4, GaAs, LiNbO3, and AlN as well as on a monolayer of hexagonal boron nitride, using a universal reactive co-sputtering recipe. The morphology and the superconducting properties of the NbTiN thin films with a thickness of 10 nm were characterized by atomic force microscopy and electrical transport measurements. Superconducting strip photon detectors were fabricated using a design suitable for waveguide integration and compared in terms of their internal quantum efficiency and detection pulse kinetics. Our results show well-comparable performances for detectors integrated on different platforms, while also demonstrating that reactive co-sputter deposition of NbTiN at room temperature provides a robust method for realizing superconducting devices on various materials.
Superconducting single-photon detectors (SSPDs) have developed into a mature device technology and excel due outstanding performance metrics, in particular high detection efficiency combined with high time resolution and low dark count rate for a wide wavelength range from the visible to the mid-infrared. In addition to commercially available systems with devices coupled to optical fibers, SSPDs can be integrated with photonic circuits using scalable nanofabrication technologies. Here, we will present recent progress on SSPDs based on NbTiN thin films and their integration on different photonic material platforms. Our process for NbTiN growth at room temperature will be described, using magnetron reactive co-sputtering to achieve high-quality superconducting layers down to thicknesses of few nanometres. Optimized SSPD devices are realized by tuning the superconducting properties of NbTiN thin films, adjusting the material composition and nanocrystalline structure. The realization of different types of detectors and geometries will be shown, including nanofabrication techniques for achieving fully suspended nanowire structures. Furthermore, we will discuss challenges and prospects for scaling-up SSPD device technology as well as detector systems. Multiplexing schemes such as dispersion engineering of superconducting transmission lines will be highlighted as powerful approach to address multiple detectors and reduce the number of required feedthroughs and electrical lines in the cryostat. Eventually, exemplary applications of SSPDs for photon counting in quantum optics and light detection and ranging (LIDAR) will be outlined.
We present our research on fabrication and structural and transport characterization of ultrathin superconducting NbN layers deposited on both single-crystal Al2O3 and Si wafers, and SiO2 and Si3N4 buffer layers grown directly on Si wafers.The thicknesses of our films varied from 6 nm to 50 nm and they were grown using reactive RF magnetron sputtering on substrates maintained at the temperature 850 • C. We have performed extensive morphology characterization of our films using the X-ray diffraction method and atomic force microscopy, and related the results to the type of the substrate used for the film deposition.Our transport measurements showed that even the thinnest, 6 nm thick NbN films had the superconducting critical temperature of 10-12 K, which was increased to 14 K for thicker films.
At the present time, ultrahigh performance superconducting nanowire single-photon detectors are the key elements in a variety of devices from biological research to quantum communications and computing. Accurate tuning of superconducting material properties is a powerful resource for fabricating single-photon detectors with desired properties. Here, we report on the major theoretical relations between ultrathin niobium nitride (NbN) film properties and superconducting nanowire single-photon detector characteristics, as well as the dependence of ultrathin NbN film properties on reactive magnetron sputtering recipes. Based on this study, we formulate the exact requirements for ultrathin NbN films for ultrahigh performance superconducting nanowire single-photon detectors. Then, we experimentally studied the properties of ultrathin NbN films (morphology, crystalline structure, critical temperature, and sheet resistance) on silicon, sapphire, silicon dioxide, and silicon nitride substrates sputtered with various recipes. We demonstrate ultrathin NbN films (obtained with more than 100 films deposition) with a wide range of critical temperature from 2.5 to 12.1 K and sheet resistance from 285 to 2000 Ω/sq and report a sheet resistance evolution of more than 40% within two years. Finally, we found out that one should use ultrathin NbN films with a specific critical temperature near 9.5 K and a sheet resistance of about 350 Ω/sq for ultrahigh performance state-of-the-art superconducting nanowire single-photon detectors at 1550 nm wavelength.
Quantum photonic integrated circuits represent a promising pathway for advancing quantum technologies, but their realization hinges on efficient on-chip detection of single photons. Superconducting nanowire single-photon detectors (SNSPDs) based on NbTiN offer high detection efficiencies and low jitter. Yet, integration challenges persist, especially on platforms like GaAs. In particular, very limited data exist about the optical properties of NbTiN. This letter reports on measurements of structural and optical properties of NbTiN thin films deposited on GaAs and Si substrates.
Lithium niobate-on-insulator (LNOI) is an emerging photonic platform with high potential for scalable quantum information processing due to its strong second-order nonlinearity. However, little progress has been made in developing on-chip single-photon detectors on LNOI. Niobium tita nium nitride (NbTiN) superconducting nanowire single-photon detectors (SNSPDs) are a promising candidate for this application. In this work, we use DC reactive magnetron sputtering to grow high quality NbTiN thin films using an ultra-high vacuum deposition system with a base pressure lower than 2×10‾¹⁰ mbar. Enabled by the low concentration of background impurities in this system, we investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature (Tc) of 12.3 K grown at a substrate temperature of 825 K. We find that the NbTiN films grow in the (111) orientation and evolve from a porous pillar structure when grown at low temperatures to densely packed fibrous grains at higher temper atures. Furthermore, we demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LNOI platform and investigate the obtained interface quality. Lastly, we fabricate SNSPDs from the NbTiN film on LNOI and characterize the detector performance.
Lithium niobate-on-insulator (LNOI) is an emerging photonic platform with high potential for scalable quantum information processing due to its strong second-order nonlinearity. However, little progress has been made in developing on-chip single-photon detectors on LNOI. Niobium titanium nitride (NbTiN) superconducting nanowire single-photon detectors (SNSPDs) are a promising candidate for this application. In this work, we use DC reactive magnetron sputtering to grow high-quality NbTiN thin films using an ultrahigh vacuum deposition system with a base pressure lower than 2 × 10 − 10 mbar. Enabled by the low concentration of background impurities in this system, we investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature ( T c ) of 12.3 K grown at a substrate temperature of 825 K. We find that the NbTiN films grow in the (111) orientation and evolve from a porous pillar structure when grown at low temperatures to densely packed fibrous grains at higher temperatures. Furthermore, we demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LNOI platform and investigate the obtained interface quality. Lastly, we fabricate SNSPDs from the NbTiN film on LNOI and characterize the detector performance.