Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physica Scripta

Tunable superconductivity in NbTiN thin films: Influence of growth temperature on fluctuation dynamics and quantum applicability

Pratiksha Pratap, Laxmipriya Nanda, Satyendra Singh, Kartik Senapati, R.P. Aloysius, Venugopal Achanta

Published Nov 24, 2025• 0 citations
Publisher

Abstract

Abstract In this report, we present the superconducting properties of NbTiN films grown by reactive DC magnetron sputtering on MgO substrates. The films were deposited at room temperature, 300 °C, and 600 o C to study the effect of deposition temperature on crystalline structure and superconducting behavior. Superconducting parameters such as transition temperature (T c ), coherence length ( ξ (0)), and upper critical field (B C2 (0)) were obtained from resistance–temperature measurements. A clear dependence of structural and superconducting properties on deposition temperature was observed. Resistance–temperature data were analyzed using Aslamazov–Larkin (AL) and Lowest Landau Level (LLL) scaling theories to describe the superconducting fluctuation mechanism. Magnetoconductance curves extracted from magnetoresistance (MR) measurements were analyzed within the AL + MT fluctuation framework to estimate the dephasing time ( τ ϕ ) in the picosecond range. All these findings are crucial for understanding the response and recovery time of superconducting single-photon detectors. The successful growth and robust parameters of high-temperature-deposited NbTiN films indicate their potential for superconducting photon detectors, kinetic inductance detectors, and other quantum applications.

DOI
10.1088/1402-4896/ae2397

Related papers

High-temperature growth of ultra thin NbTiN films on lithium niobate for integrated single photon detection

Sjoerd Telkamp, Odiel Hooybergs, Myriam Rihani +9 more

Lithium niobate-on-insulator (LNOI) is an emerging photonic platform with high potential for scalable quantum information processing due to its strong second-order nonlinearity. However, little progress has been made in developing on-chip single-photon detectors on LNOI. Niobium tita nium nitride (NbTiN) superconducting nanowire single-photon detectors (SNSPDs) are a promising candidate for this application. In this work, we use DC reactive magnetron sputtering to grow high quality NbTiN thin films using an ultra-high vacuum deposition system with a base pressure lower than 2×10‾¹⁰ mbar. Enabled by the low concentration of background impurities in this system, we investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature (Tc) of 12.3 K grown at a substrate temperature of 825 K. We find that the NbTiN films grow in the (111) orientation and evolve from a porous pillar structure when grown at low temperatures to densely packed fibrous grains at higher temper atures. Furthermore, we demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LNOI platform and investigate the obtained interface quality. Lastly, we fabricate SNSPDs from the NbTiN film on LNOI and characterize the detector performance.

•Sep 9, 2025•0 citations

NbTiN thin films for superconducting photon detectors on photonic and two-dimensional materials

Stephan Steinhauer, Lily Yang, Samuel Gyger +7 more

Integration of superconducting devices on photonic platforms opens up a wide range of functionalities and applications. We report on NbTiN thin films deposited on SiO2, Si3N4, GaAs, LiNbO3, and AlN as well as on a monolayer of hexagonal boron nitride, using a universal reactive co-sputtering recipe. The morphology and the superconducting properties of the NbTiN thin films with a thickness of 10 nm were characterized by atomic force microscopy and electrical transport measurements. Superconducting strip photon detectors were fabricated using a design suitable for waveguide integration and compared in terms of their internal quantum efficiency and detection pulse kinetics. Our results show well-comparable performances for detectors integrated on different platforms, while also demonstrating that reactive co-sputter deposition of NbTiN at room temperature provides a robust method for realizing superconducting devices on various materials.

Applied Physics Letters•Apr 27, 2020•45 citations

High-temperature growth of ultra thin NbTiN films on lithium niobate for integrated single photon detection

Sjoerd Telkamp, Odiel Hooybergs, Myriam Rihani +9 more

Lithium niobate-on-insulator (LNOI) is an emerging photonic platform with high potential for scalable quantum information processing due to its strong second-order nonlinearity. However, little progress has been made in developing on-chip single-photon detectors on LNOI. Niobium titanium nitride (NbTiN) superconducting nanowire single-photon detectors (SNSPDs) are a promising candidate for this application. In this work, we use DC reactive magnetron sputtering to grow high-quality NbTiN thin films using an ultrahigh vacuum deposition system with a base pressure lower than 2 × 10 − 10 mbar. Enabled by the low concentration of background impurities in this system, we investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature ( T c ) of 12.3 K grown at a substrate temperature of 825 K. We find that the NbTiN films grow in the (111) orientation and evolve from a porous pillar structure when grown at low temperatures to densely packed fibrous grains at higher temperatures. Furthermore, we demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LNOI platform and investigate the obtained interface quality. Lastly, we fabricate SNSPDs from the NbTiN film on LNOI and characterize the detector performance.

arXiv:2509.07870•Physical Review Materials•Jun 22, 2026•2 citations

The effect of niobium thin film structure on losses in superconducting circuits

Maxwell Drimmer, Sjoerd Telkamp, Felix L Fischer +7 more

Abstract The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10 6 at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and indicate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.

arXiv:2403.12164•Materials for Quantum Technology•Oct 14, 2025•22 citations

Sputtered NbN films for ultrahigh performance superconducting nanowire single-photon detectors

Ilya A. Stepanov, Aleksandr S. Baburin, Danil V. Kushnev +7 more

At the present time, ultrahigh performance superconducting nanowire single-photon detectors are the key elements in a variety of devices from biological research to quantum communications and computing. Accurate tuning of superconducting material properties is a powerful resource for fabricating single-photon detectors with desired properties. Here, we report on the major theoretical relations between ultrathin niobium nitride (NbN) film properties and superconducting nanowire single-photon detector characteristics, as well as the dependence of ultrathin NbN film properties on reactive magnetron sputtering recipes. Based on this study, we formulate the exact requirements for ultrathin NbN films for ultrahigh performance superconducting nanowire single-photon detectors. Then, we experimentally studied the properties of ultrathin NbN films (morphology, crystalline structure, critical temperature, and sheet resistance) on silicon, sapphire, silicon dioxide, and silicon nitride substrates sputtered with various recipes. We demonstrate ultrathin NbN films (obtained with more than 100 films deposition) with a wide range of critical temperature from 2.5 to 12.1 K and sheet resistance from 285 to 2000 Ω/sq and report a sheet resistance evolution of more than 40% within two years. Finally, we found out that one should use ultrathin NbN films with a specific critical temperature near 9.5 K and a sheet resistance of about 350 Ω/sq for ultrahigh performance state-of-the-art superconducting nanowire single-photon detectors at 1550 nm wavelength.

arXiv:2311.17000•APL Materials•Feb 1, 2024•18 citations

Improvement of the critical temperature of NbTiN films on III-nitride substrates

H. Machhadani, Julien Zichi, Catherine Bougerol +7 more

Abstract In this paper, we study the impact of using III-nitride semiconductors (GaN, AlN) as substrates for ultrathin (11 nm) superconducting films of NbTiN deposited by reactive magnetron sputtering. The resulting NbTiN layers are (111)-oriented, fully relaxed, and they keep an epitaxial relation with the substrate. The higher critical superconducting temperature ( T c = 11.8 K) was obtained on AlN-on-sapphire, which was the substrate with smaller lattice mismatch with NbTiN. We attribute this improvement to a reduction of the NbTiN roughness, which appears associated with the relaxation of the lattice misfit with the substrate. On AlN-on-sapphire, superconducting nanowire single photon detectors were fabricated and tested, obtaining external quantum efficiencies that are in excellent agreement with theoretical calculations.

arXiv:1810.04070•Superconductor Science and Technology•Dec 19, 2018•19 citations
Abstract In this report, we present the superconducting properties of NbTiN films grown by reactive DC magnetron sputtering on MgO substrates. The films were deposited at room temperature, 300 °C, and 600 o C to study the effect of deposition temperature on crystalline structure and superconducting behavior. Superconducting parameters such as transition temperature (T c ), coherence length ( ξ (0)), and upper critical field (B C2 (0)) were obtained from resistance–temperature measurements. A clear dependence of structural and superconducting properties on deposition temperature was observed. Resistance–temperature data were analyzed using Aslamazov–Larkin (AL) and Lowest Landau Level (LLL) scaling theories to describe the superconducting fluctuation mechanism. Magnetoconductance curves extracted from magnetoresistance (MR) measurements were analyzed within the AL + MT fluctuation framework to estimate the dephasing time ( τ ϕ ) in the picosecond range. All these findings are crucial for understanding the response and recovery time of superconducting single-photon detectors. The successful growth and robust parameters of high-temperature-deposited NbTiN films indicate their potential for superconducting photon detectors, kinetic inductance detectors, and other quantum applications.
Lithium niobate-on-insulator (LNOI) is an emerging photonic platform with high potential for scalable quantum information processing due to its strong second-order nonlinearity. However, little progress has been made in developing on-chip single-photon detectors on LNOI. Niobium tita nium nitride (NbTiN) superconducting nanowire single-photon detectors (SNSPDs) are a promising candidate for this application. In this work, we use DC reactive magnetron sputtering to grow high quality NbTiN thin films using an ultra-high vacuum deposition system with a base pressure lower than 2×10‾¹⁰ mbar. Enabled by the low concentration of background impurities in this system, we investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature (Tc) of 12.3 K grown at a substrate temperature of 825 K. We find that the NbTiN films grow in the (111) orientation and evolve from a porous pillar structure when grown at low temperatures to densely packed fibrous grains at higher temper atures. Furthermore, we demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LNOI platform and investigate the obtained interface quality. Lastly, we fabricate SNSPDs from the NbTiN film on LNOI and characterize the detector performance.
Integration of superconducting devices on photonic platforms opens up a wide range of functionalities and applications. We report on NbTiN thin films deposited on SiO2, Si3N4, GaAs, LiNbO3, and AlN as well as on a monolayer of hexagonal boron nitride, using a universal reactive co-sputtering recipe. The morphology and the superconducting properties of the NbTiN thin films with a thickness of 10 nm were characterized by atomic force microscopy and electrical transport measurements. Superconducting strip photon detectors were fabricated using a design suitable for waveguide integration and compared in terms of their internal quantum efficiency and detection pulse kinetics. Our results show well-comparable performances for detectors integrated on different platforms, while also demonstrating that reactive co-sputter deposition of NbTiN at room temperature provides a robust method for realizing superconducting devices on various materials.
Lithium niobate-on-insulator (LNOI) is an emerging photonic platform with high potential for scalable quantum information processing due to its strong second-order nonlinearity. However, little progress has been made in developing on-chip single-photon detectors on LNOI. Niobium titanium nitride (NbTiN) superconducting nanowire single-photon detectors (SNSPDs) are a promising candidate for this application. In this work, we use DC reactive magnetron sputtering to grow high-quality NbTiN thin films using an ultrahigh vacuum deposition system with a base pressure lower than 2 × 10 − 10 mbar. Enabled by the low concentration of background impurities in this system, we investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature ( T c ) of 12.3 K grown at a substrate temperature of 825 K. We find that the NbTiN films grow in the (111) orientation and evolve from a porous pillar structure when grown at low temperatures to densely packed fibrous grains at higher temperatures. Furthermore, we demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LNOI platform and investigate the obtained interface quality. Lastly, we fabricate SNSPDs from the NbTiN film on LNOI and characterize the detector performance.
Abstract The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10 6 at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and indicate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.
At the present time, ultrahigh performance superconducting nanowire single-photon detectors are the key elements in a variety of devices from biological research to quantum communications and computing. Accurate tuning of superconducting material properties is a powerful resource for fabricating single-photon detectors with desired properties. Here, we report on the major theoretical relations between ultrathin niobium nitride (NbN) film properties and superconducting nanowire single-photon detector characteristics, as well as the dependence of ultrathin NbN film properties on reactive magnetron sputtering recipes. Based on this study, we formulate the exact requirements for ultrathin NbN films for ultrahigh performance superconducting nanowire single-photon detectors. Then, we experimentally studied the properties of ultrathin NbN films (morphology, crystalline structure, critical temperature, and sheet resistance) on silicon, sapphire, silicon dioxide, and silicon nitride substrates sputtered with various recipes. We demonstrate ultrathin NbN films (obtained with more than 100 films deposition) with a wide range of critical temperature from 2.5 to 12.1 K and sheet resistance from 285 to 2000 Ω/sq and report a sheet resistance evolution of more than 40% within two years. Finally, we found out that one should use ultrathin NbN films with a specific critical temperature near 9.5 K and a sheet resistance of about 350 Ω/sq for ultrahigh performance state-of-the-art superconducting nanowire single-photon detectors at 1550 nm wavelength.
Abstract In this paper, we study the impact of using III-nitride semiconductors (GaN, AlN) as substrates for ultrathin (11 nm) superconducting films of NbTiN deposited by reactive magnetron sputtering. The resulting NbTiN layers are (111)-oriented, fully relaxed, and they keep an epitaxial relation with the substrate. The higher critical superconducting temperature ( T c = 11.8 K) was obtained on AlN-on-sapphire, which was the substrate with smaller lattice mismatch with NbTiN. We attribute this improvement to a reduction of the NbTiN roughness, which appears associated with the relaxation of the lattice misfit with the substrate. On AlN-on-sapphire, superconducting nanowire single photon detectors were fabricated and tested, obtaining external quantum efficiencies that are in excellent agreement with theoretical calculations.