We have developed and verified experimentally a novel high-resolution superconducting ADC architecture based on phase modulation/demodulation principle and implemented in RSFQ logic. We have demonstrated an ADC chip providing full implementation of this architecture, including on-chip decimation filter and multiple-channel synchronizer. We have also developed a digital ADC evaluation system consisting of an interface electronics block converting the low-voltage ADC output to standard TTL form at multi-MHz sampling rate, and a computerized test station performing data acquisition, processing and display in real time. Using this system we have demonstrated that for low-frequency (kHz) signals our ADC chips possess linearity in excess of 16 bits with Spur-Free Dynamic Range over 108 dB, which is an important benchmark for any high-resolution ADC technology.
We have developed and verified experimentally a novel high-resolution superconducting ADC architecture based on phase modulation/demodulation principle and implemented in RSFQ logic. We have demonstrated an ADC chip providing full implementation of this architecture, including on-chip decimation filter and multiple-channel synchronizer. We have also developed a digital ADC evaluation system consisting of an interface electronics block converting the low-voltage ADC output to standard TTL form at multi-MHz sampling rate, and a computerized test station performing data acquisition, processing and display in real time. Using this system we have demonstrated that for low-frequency (kHz) signals our ADC chips possess linearity in excess of 16 bits with Spur-Free Dynamic Range over 108 dB, which is an important benchmark for any high-resolution ADC technology.
Last year we presented the first fully operational superconducting Analog-to-Digital Converter (ADC) with on-chip Digital Signal Processing (DSP). Here we review this device and introduce completed and prospective innovations required to exceed the performance of the best semiconductor counterparts. The ADC chip contains 2 basic parts: a "fundamental" ADC operating at about 20 GHz sampling rate and a digital decimation filter which attenuates high-frequency noise components and reduces the sampling rate to match it with the bandwidth of an input signal. Our short term goal is to achieve 14 bits Spurious Free Dynamic Range (SFDR) for 60 MHz signal bandwidth by using the standard 1000 A/cm/sup 2/ Nb-trilayer fabrication technology commercially available at HYPRES, Inc.
We have developed a flux-quantizing A/D converter (ADC) based on RSFQ elements, employing a novel front end capable of generating high-linearity multibit differential code within a wide dynamic range (up to 16 bits). The front end operates as a phase modulator/demodulator and uses fractional-flux-quantum least significant bit (LSB). It runs at multi-GHz speed, enabling ADCs with large oversampling ratio and effective resolution in excess of 20 bits (after decimation filtering). We have designed, fabricated and tested several versions of a complete ADC using this new architecture and demonstrated its operation with dynamic range of 14 bits. We have also confirmed continuous phase modulation of the flux quantizer with a carrier frequency of 10 GHz.>
Analog-to-digital converters (ADCs) are key components of most digital systems, as the necessary interface between the analogue world to send and receive signals. Semiconductor ADC systems are intrinsically limited to low frequency ranges of a few GHz and associated to dynamic ranges limited by linearity issues. Superconductor electronic ADCs rely on the magnetic flux quantization and do not suffer from the linearity issues. Moreover, the Rapid-Single-Flux Quantum (RSFQ) technique [1] allows the sampling of signals far in the microwave range, of the order of 100 GHz for the fastest circuits with state-of-the-art low critical temperature niobium-based technology.Two main applications require the use of fast and high dynamic range superconducting ADCs: future ground- or space-based telecommunication systems for software defined radio (SDR) and all systems requiring very high dynamic range in the 120-180 dB range. In this last category, one can find the digital Superconducting Quantum Interference Devices (SQUIDs) that combine the digitization due to the RSFQ technique, with the ultrasensitive sensing of magnetic fields, that are of interest for several applications, ranging from Non-Destructive Evaluation (NDE) to the detection of faint geomagnetic signatures [2].In this work, we will describe in details an analysis of performances of two different kinds of ADCs, respectively for space and geophysics applications. New designs with their electrical circuits will be described for operation in the microwave frequency band with a sigma-delta architecture, and for improved dynamic range with a delta design. The performance in terms of number of bits or dynamic range, frequency bandwidth and ultimate sampling speed will be compared with the ones of existing ADCs. Considerations about the layout due to technological considerations are taken into account in the design. Trade-offs between performance and technologies will be emphasized.[1] K. Likharev and V. Semenov, IEEE Trans. Appl. Supercond. 1, 3 (1991).[2] T. Reich, P. Febvre, T. Ortlepp, F. H. Uhlmann, J. Kunert, R. Stolz, and H.-G. Meyer, Journal of Applied Physics 104(2), 024509 (2008).
Superconductor analog-to-digital converters (ADC) offer high sensitivity and large dynamic range. We report recent advances in the low-pass phase-modulation-demodulation (PMD) oversampled analog-to-digital converter (ADC). The oversampled data from the PMD front-end are passed along with sampling clock to an on-chip digital filter. In the past, the maximum frequency of operation of such chips were limited by that of the digital decimation filter (DDF) to about 30 GHz. Recently, we have designed a chip that allows the PMD front-end to be clocked twice as fast as the DDF, resulting in sampling rates of 46.08 GHz and 29.44 GHz for chips with critical current densities of 4.5 and 1 kA/cm2respectively. We have also designed a new PMD front-end, with a quarter-rate quantizer (QRQ) that allows 18-20 dB extension of dynamic range. We are also pursuing a subranging ADC design with two PMD front-ends connected with fluxon amplifier and subtractor circuitry that promises a dynamic range extension by 25-30 dB. We report signal-to-noise ratio and spur-free dynamic range measurement results for various ADC chips, and project performance for future improvements.
Software-Defined Radio (SDR), as explained in [1], is a promising concept for the wireless communication industry since the entire transceiver function can be implemented in software, avoiding the replacement of hardware each time the system has to be upgraded. However, the practical implementation of such a system is depended on the hardware, which consists of precise, ultra highspeed electronic devices such as Analog-to-Digital Converters (ADCs). The present state-of-the-art semiconductor ADCs cannot be used for the implementation of SDR in the near future [2]. Some of the factors that hamper the implementation are the requirements of very high speed of a few tens of GHz and the high resolution (e.g. 16 bits) at these speeds. On the other hand, using the Low-Temperature Superconducting (LTS) technology [3], which relays on the quantum mechanical property of superconductors, very high-speed electronic devices with the accuracy of a flux quantum, can be constructed. In a closed superconducting loop, the magnetic flux can exist only in discrete quantized amounts equal to the multiples of the magnetic flux quantum, φ0 = h/2e ~ 2.07x10 Wb. The theoretical speed limit of such a Rapid Single Flux Quantum (RSFQ) device is close to 1 THz [4]. These RSFQ circuits are the fastest of all devices built in any known technology. The basic building block of an RSFQ circuit is the Josephson Junction (JJ), which is formed when two superconductors are separated by an interface. Since RSFQ circuits work at extremely high speeds, testing and verification of such a device is a difficult and challenging task. Direct testing at these speeds is not possible at this moment. Furthermore, the costs of the equipment required for such tests would be extremely high. Hence methods have to be developed to reduce the requirements of external
We have developed a new architecture for a superconducting high-resolution analog-to-digital converter (ADC) which is highly beneficial for IR array readout applications due to its high sensitivity, wide dynamic range and sub-mW power consumption. This ADC is based on the principles of magnetic flux quantization, direct differential coding and decimation filtering. The digital part of the ADC employs elements of the Rapid Single Flux Quantum logic family which are capable of clock frequencies in excess of 100 GHz. We discuss the limits of ADC performance and present an analysis of the power consumption in these ADCs. We also report experimental verification of several key components of this architecture in Niobium technology (operating at 4.2 K), particularly the implementation of a synchronizer unit (necessary for the generation of the differential digital code) as well as a dual-counter synchronous ADC.