Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Low-power high-resolution superconducting flux-quantizing A/D converter for IR array readout

Sergey V. Rylov, R. P. Robertazzi

Published Jun 23, 1994• 1 citation
Publisher

Abstract

We have developed a new architecture for a superconducting high-resolution analog-to-digital converter (ADC) which is highly beneficial for IR array readout applications due to its high sensitivity, wide dynamic range and sub-mW power consumption. This ADC is based on the principles of magnetic flux quantization, direct differential coding and decimation filtering. The digital part of the ADC employs elements of the Rapid Single Flux Quantum logic family which are capable of clock frequencies in excess of 100 GHz. We discuss the limits of ADC performance and present an analysis of the power consumption in these ADCs. We also report experimental verification of several key components of this architecture in Niobium technology (operating at 4.2 K), particularly the implementation of a synchronizer unit (necessary for the generation of the differential digital code) as well as a dual-counter synchronous ADC.

DOI
10.1117/12.178490

Related papers

Superconducting high-resolution A/D converter based on phase modulation and multichannel timing arbitration

Sergey V. Rylov, R. P. Robertazzi

We have developed a flux-quantizing A/D converter (ADC) based on RSFQ elements, employing a novel front end capable of generating high-linearity multibit differential code within a wide dynamic range (up to 16 bits). The front end operates as a phase modulator/demodulator and uses fractional-flux-quantum least significant bit (LSB). It runs at multi-GHz speed, enabling ADCs with large oversampling ratio and effective resolution in excess of 20 bits (after decimation filtering). We have designed, fabricated and tested several versions of a complete ADC using this new architecture and demonstrated its operation with dynamic range of 14 bits. We have also confirmed continuous phase modulation of the flux quantizer with a carrier frequency of 10 GHz.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•54 citations

Analysis of superconducting analog-to-digital converter front-end for improved resolution and large dynamic range

Pascal Febvre, Héla Gassara, Patricia Desgreys +1 more

Analog-to-digital converters (ADCs) are key components of most digital systems, as the necessary interface between the analogue world to send and receive signals. Semiconductor ADC systems are intrinsically limited to low frequency ranges of a few GHz and associated to dynamic ranges limited by linearity issues. Superconductor electronic ADCs rely on the magnetic flux quantization and do not suffer from the linearity issues. Moreover, the Rapid-Single-Flux Quantum (RSFQ) technique [1] allows the sampling of signals far in the microwave range, of the order of 100 GHz for the fastest circuits with state-of-the-art low critical temperature niobium-based technology.Two main applications require the use of fast and high dynamic range superconducting ADCs: future ground- or space-based telecommunication systems for software defined radio (SDR) and all systems requiring very high dynamic range in the 120-180 dB range. In this last category, one can find the digital Superconducting Quantum Interference Devices (SQUIDs) that combine the digitization due to the RSFQ technique, with the ultrasensitive sensing of magnetic fields, that are of interest for several applications, ranging from Non-Destructive Evaluation (NDE) to the detection of faint geomagnetic signatures [2].In this work, we will describe in details an analysis of performances of two different kinds of ADCs, respectively for space and geophysics applications. New designs with their electrical circuits will be described for operation in the microwave frequency band with a sigma-delta architecture, and for improved dynamic range with a delta design. The performance in terms of number of bits or dynamic range, frequency bandwidth and ultimate sampling speed will be compared with the ones of existing ADCs. Considerations about the layout due to technological considerations are taken into account in the design. Trade-offs between performance and technologies will be emphasized.[1] K. Likharev and V. Semenov, IEEE Trans. Appl. Supercond. 1, 3 (1991).[2] T. Reich, P. Febvre, T. Ortlepp, F. H. Uhlmann, J. Kunert, R. Stolz, and H.-G. Meyer, Journal of Applied Physics 104(2), 024509 (2008).

•Apr 25, 2010•0 citations

Superconductor analog-to-digital converters

Oleg A. Mukhanov, Deepnarayan Gupta, Alan M. Kadin +1 more

Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.

Proceedings of the IEEE•Sep 20, 2004•182 citations

High resolution ADC system

Sergey V. Rylov, Lewis A. Bunz, Dmitri V. Gaidarenko +3 more

We have developed and verified experimentally a novel high-resolution superconducting ADC architecture based on phase modulation/demodulation principle and implemented in RSFQ logic. We have demonstrated an ADC chip providing full implementation of this architecture, including on-chip decimation filter and multiple-channel synchronizer. We have also developed a digital ADC evaluation system consisting of an interface electronics block converting the low-voltage ADC output to standard TTL form at multi-MHz sampling rate, and a computerized test station performing data acquisition, processing and display in real time. Using this system we have demonstrated that for low-frequency (kHz) signals our ADC chips possess linearity in excess of 16 bits with Spur-Free Dynamic Range over 108 dB, which is an important benchmark for any high-resolution ADC technology.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•26 citations

Analysis of high-performance counter-type A/D converters using RSFQ logic/memory elements

Sergey V. Rylov

A new family of counter-type Josephson-junction A/D converters using ultrafast rapid single-flux quantum (RSFQ) logic/memory elements is proposed. The converters are built in two main blocks: a low-bit differential-code A/D converter running with subterahertz clock speed and a RSFQ-logic-based digital processing unit providing digital low-pass filtering and sample rate reduction. It is shown that such converters can be treated as digital SQUIDs possessing an extremely high slew rate (up to 10/sup 11/ phi /sub 0//s) combined with flux resolution close to that of analog DC SQUIDs (up to 10/sup -6/ phi /sub 0/Hz/sup -1/2/). Several ways of implementing both main blocks to make it possible to tradeoff these parameters against converter complexity are presented and discussed.

IEEE Transactions on Magnetics•Mar 1, 1991•35 citations

Superconductor analog-to-digital converters and their applications

Deepnarayan Gupta, Amol Inamdar, Dmitri E. Kirichenko +2 more

A wide variety of applications, ranging from radio-frequency (RF) receivers for broadband communications and signal detection, on earth and in space, would benefit from high-performance superconductor analog-to-digital converters (ADCs), based on magnetic flux quantization and fast switching Josephson junctions. Superconductor ADCs are capable of very high sample rates (100 GHz or more), very high linearity, and high sensitivity. Nyquist-rate ADCs use the high sample rate to digitize a wide instantaneous bandwidth (tens of GHz) and are useful for wideband spectrum monitoring as well as high-end scientific instrumentation. Delta and delta-sigma oversampling ADCs use the high linearity to achieve programmable trade-off between dynamic range and instantaneous bandwidth. These lowpass and bandpass ADCs have been used for direct digitization of narrower (tens to hundreds of MHz) RF bands in the 1-20 GHz range for a variety of communications, intelligence, electronic warfare, and radar applications. Another application area of these cryogenic ADCs is for outputs of cryogenic sensor arrays and terahertz mixers. Recent advances in various classes of ADCs for different applications are described.

IEEE MTT-S International Microwave Symposium digest•Jun 1, 2011•23 citations
We have developed a new architecture for a superconducting high-resolution analog-to-digital converter (ADC) which is highly beneficial for IR array readout applications due to its high sensitivity, wide dynamic range and sub-mW power consumption. This ADC is based on the principles of magnetic flux quantization, direct differential coding and decimation filtering. The digital part of the ADC employs elements of the Rapid Single Flux Quantum logic family which are capable of clock frequencies in excess of 100 GHz. We discuss the limits of ADC performance and present an analysis of the power consumption in these ADCs. We also report experimental verification of several key components of this architecture in Niobium technology (operating at 4.2 K), particularly the implementation of a synchronizer unit (necessary for the generation of the differential digital code) as well as a dual-counter synchronous ADC.
We have developed a flux-quantizing A/D converter (ADC) based on RSFQ elements, employing a novel front end capable of generating high-linearity multibit differential code within a wide dynamic range (up to 16 bits). The front end operates as a phase modulator/demodulator and uses fractional-flux-quantum least significant bit (LSB). It runs at multi-GHz speed, enabling ADCs with large oversampling ratio and effective resolution in excess of 20 bits (after decimation filtering). We have designed, fabricated and tested several versions of a complete ADC using this new architecture and demonstrated its operation with dynamic range of 14 bits. We have also confirmed continuous phase modulation of the flux quantizer with a carrier frequency of 10 GHz.>
Analog-to-digital converters (ADCs) are key components of most digital systems, as the necessary interface between the analogue world to send and receive signals. Semiconductor ADC systems are intrinsically limited to low frequency ranges of a few GHz and associated to dynamic ranges limited by linearity issues. Superconductor electronic ADCs rely on the magnetic flux quantization and do not suffer from the linearity issues. Moreover, the Rapid-Single-Flux Quantum (RSFQ) technique [1] allows the sampling of signals far in the microwave range, of the order of 100 GHz for the fastest circuits with state-of-the-art low critical temperature niobium-based technology.Two main applications require the use of fast and high dynamic range superconducting ADCs: future ground- or space-based telecommunication systems for software defined radio (SDR) and all systems requiring very high dynamic range in the 120-180 dB range. In this last category, one can find the digital Superconducting Quantum Interference Devices (SQUIDs) that combine the digitization due to the RSFQ technique, with the ultrasensitive sensing of magnetic fields, that are of interest for several applications, ranging from Non-Destructive Evaluation (NDE) to the detection of faint geomagnetic signatures [2].In this work, we will describe in details an analysis of performances of two different kinds of ADCs, respectively for space and geophysics applications. New designs with their electrical circuits will be described for operation in the microwave frequency band with a sigma-delta architecture, and for improved dynamic range with a delta design. The performance in terms of number of bits or dynamic range, frequency bandwidth and ultimate sampling speed will be compared with the ones of existing ADCs. Considerations about the layout due to technological considerations are taken into account in the design. Trade-offs between performance and technologies will be emphasized.[1] K. Likharev and V. Semenov, IEEE Trans. Appl. Supercond. 1, 3 (1991).[2] T. Reich, P. Febvre, T. Ortlepp, F. H. Uhlmann, J. Kunert, R. Stolz, and H.-G. Meyer, Journal of Applied Physics 104(2), 024509 (2008).
Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.
We have developed and verified experimentally a novel high-resolution superconducting ADC architecture based on phase modulation/demodulation principle and implemented in RSFQ logic. We have demonstrated an ADC chip providing full implementation of this architecture, including on-chip decimation filter and multiple-channel synchronizer. We have also developed a digital ADC evaluation system consisting of an interface electronics block converting the low-voltage ADC output to standard TTL form at multi-MHz sampling rate, and a computerized test station performing data acquisition, processing and display in real time. Using this system we have demonstrated that for low-frequency (kHz) signals our ADC chips possess linearity in excess of 16 bits with Spur-Free Dynamic Range over 108 dB, which is an important benchmark for any high-resolution ADC technology.
A new family of counter-type Josephson-junction A/D converters using ultrafast rapid single-flux quantum (RSFQ) logic/memory elements is proposed. The converters are built in two main blocks: a low-bit differential-code A/D converter running with subterahertz clock speed and a RSFQ-logic-based digital processing unit providing digital low-pass filtering and sample rate reduction. It is shown that such converters can be treated as digital SQUIDs possessing an extremely high slew rate (up to 10/sup 11/ phi /sub 0//s) combined with flux resolution close to that of analog DC SQUIDs (up to 10/sup -6/ phi /sub 0/Hz/sup -1/2/). Several ways of implementing both main blocks to make it possible to tradeoff these parameters against converter complexity are presented and discussed.
A wide variety of applications, ranging from radio-frequency (RF) receivers for broadband communications and signal detection, on earth and in space, would benefit from high-performance superconductor analog-to-digital converters (ADCs), based on magnetic flux quantization and fast switching Josephson junctions. Superconductor ADCs are capable of very high sample rates (100 GHz or more), very high linearity, and high sensitivity. Nyquist-rate ADCs use the high sample rate to digitize a wide instantaneous bandwidth (tens of GHz) and are useful for wideband spectrum monitoring as well as high-end scientific instrumentation. Delta and delta-sigma oversampling ADCs use the high linearity to achieve programmable trade-off between dynamic range and instantaneous bandwidth. These lowpass and bandpass ADCs have been used for direct digitization of narrower (tens to hundreds of MHz) RF bands in the 1-20 GHz range for a variety of communications, intelligence, electronic warfare, and radar applications. Another application area of these cryogenic ADCs is for outputs of cryogenic sensor arrays and terahertz mixers. Recent advances in various classes of ADCs for different applications are described.