Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Superconducting high-resolution A/D converter based on phase modulation and multichannel timing arbitration

Sergey V. Rylov, R. P. Robertazzi

Published Jun 1, 1995• 54 citations
Publisher

Abstract

We have developed a flux-quantizing A/D converter (ADC) based on RSFQ elements, employing a novel front end capable of generating high-linearity multibit differential code within a wide dynamic range (up to 16 bits). The front end operates as a phase modulator/demodulator and uses fractional-flux-quantum least significant bit (LSB). It runs at multi-GHz speed, enabling ADCs with large oversampling ratio and effective resolution in excess of 20 bits (after decimation filtering). We have designed, fabricated and tested several versions of a complete ADC using this new architecture and demonstrated its operation with dynamic range of 14 bits. We have also confirmed continuous phase modulation of the flux quantizer with a carrier frequency of 10 GHz.>

DOI
10.1109/77.403035

Related papers

Low-power high-resolution superconducting flux-quantizing A/D converter for IR array readout

Sergey V. Rylov, R. P. Robertazzi

We have developed a new architecture for a superconducting high-resolution analog-to-digital converter (ADC) which is highly beneficial for IR array readout applications due to its high sensitivity, wide dynamic range and sub-mW power consumption. This ADC is based on the principles of magnetic flux quantization, direct differential coding and decimation filtering. The digital part of the ADC employs elements of the Rapid Single Flux Quantum logic family which are capable of clock frequencies in excess of 100 GHz. We discuss the limits of ADC performance and present an analysis of the power consumption in these ADCs. We also report experimental verification of several key components of this architecture in Niobium technology (operating at 4.2 K), particularly the implementation of a synchronizer unit (necessary for the generation of the differential digital code) as well as a dual-counter synchronous ADC.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jun 23, 1994•1 citation

Quarter-Rate Superconducting Modulator for Improved High Resolution Analog-to-Digital Converter

Amol Inamdar, Sergey V. Rylov, Anubhav Sahu +2 more

We describe the design of a new oversampled analog-to-digital converter (ADC) based on phase modulation-demodulation (PMD) architecture. In a PMD ADC, the analog input signal modulates the phase of a periodic stream of fluxons applied to a modulator circuit for subsequent demodulation in a clocked synchronizer circuit to produce a digital code. The new modulator provides a way to quadruple the average fluxon transport rate, and hence the input dynamic range, by replacing the single junction interferometer with a high-speed symmetric divide-by-4 circuit. The divider acts as a 1:4 asynchronous demultiplexer which distributes incoming fluxons among its four quarter-rate outputs. This four-fold rate reduction, at the modulator output, allows one to increase the ADC maximum input slew rate to 2 fluxons per clock period, achieving 2 additional bits of resolution at the same sampling clock frequency. We have designed and fabricated a quarter-rate ADC front-end and present low frequency test results for the same. The ADC comprises a quarter-rate quantizer which has been successfully tested at an input frequency of 81.92 GHz.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•4 citations

Superconductor analog to digital converter for sigint applications

Amol Inamdar, Deepnarayan Gupta, Timur V. Filippov +6 more

Superconductor analog-to-digital converters (ADC) offer high sensitivity and large dynamic range. We report recent advances in the low-pass phase-modulation-demodulation (PMD) oversampled analog-to-digital converter (ADC). The oversampled data from the PMD front-end are passed along with sampling clock to an on-chip digital filter. In the past, the maximum frequency of operation of such chips were limited by that of the digital decimation filter (DDF) to about 30 GHz. Recently, we have designed a chip that allows the PMD front-end to be clocked twice as fast as the DDF, resulting in sampling rates of 46.08 GHz and 29.44 GHz for chips with critical current densities of 4.5 and 1 kA/cm2respectively. We have also designed a new PMD front-end, with a quarter-rate quantizer (QRQ) that allows 18-20 dB extension of dynamic range. We are also pursuing a subranging ADC design with two PMD front-ends connected with fluxon amplifier and subtractor circuitry that promises a dynamic range extension by 25-30 dB. We report signal-to-noise ratio and spur-free dynamic range measurement results for various ADC chips, and project performance for future improvements.

IEEE Military Communications Conference (MILCOM)•Nov 1, 2008•9 citations

High resolution ADC system

Sergey V. Rylov, Lewis A. Bunz, Dmitri V. Gaidarenko +3 more

We have developed and verified experimentally a novel high-resolution superconducting ADC architecture based on phase modulation/demodulation principle and implemented in RSFQ logic. We have demonstrated an ADC chip providing full implementation of this architecture, including on-chip decimation filter and multiple-channel synchronizer. We have also developed a digital ADC evaluation system consisting of an interface electronics block converting the low-voltage ADC output to standard TTL form at multi-MHz sampling rate, and a computerized test station performing data acquisition, processing and display in real time. Using this system we have demonstrated that for low-frequency (kHz) signals our ADC chips possess linearity in excess of 16 bits with Spur-Free Dynamic Range over 108 dB, which is an important benchmark for any high-resolution ADC technology.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•26 citations

Flux quantum sigma-delta analog-to-digital converters for rf signals

Donald L. Miller, John X. Przybysz, A. Hodge Worsham +1 more

The sigma-delta architecture is the method of choice for analog-to-digital converters (ADCs) for high dynamic range applications. This architecture uses oversampling and precise feedback to generate a shaped spectral distribution of the quantization noise. Subsequent digital filtering suppresses out-of-band quantization noise, yielding a large signal to in-band noise ratio. A unique advantage of superconducting electronics is the availability of the flux quantum to provide quantum mechanically accurate feedback at GHz rates. Josephson digital technology extends sigma-delta ADCs from MHz sampling rates to GHz sampling rates, from kHz signal bandwidths to MHz signal bandwidths, with comparable or better dynamic range when compared to semiconductor implementations. This paper presents circuits for Josephson sigma-delta ADCs, including single-loop and double-loop modulators operating at sampling rates up to 2 GHz, and circuits for quantized feedback. The first demonstration of double-loop noise shaping is also presented.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•25 citations

Analysis of superconducting analog-to-digital converter front-end for improved resolution and large dynamic range

Pascal Febvre, Héla Gassara, Patricia Desgreys +1 more

Analog-to-digital converters (ADCs) are key components of most digital systems, as the necessary interface between the analogue world to send and receive signals. Semiconductor ADC systems are intrinsically limited to low frequency ranges of a few GHz and associated to dynamic ranges limited by linearity issues. Superconductor electronic ADCs rely on the magnetic flux quantization and do not suffer from the linearity issues. Moreover, the Rapid-Single-Flux Quantum (RSFQ) technique [1] allows the sampling of signals far in the microwave range, of the order of 100 GHz for the fastest circuits with state-of-the-art low critical temperature niobium-based technology.Two main applications require the use of fast and high dynamic range superconducting ADCs: future ground- or space-based telecommunication systems for software defined radio (SDR) and all systems requiring very high dynamic range in the 120-180 dB range. In this last category, one can find the digital Superconducting Quantum Interference Devices (SQUIDs) that combine the digitization due to the RSFQ technique, with the ultrasensitive sensing of magnetic fields, that are of interest for several applications, ranging from Non-Destructive Evaluation (NDE) to the detection of faint geomagnetic signatures [2].In this work, we will describe in details an analysis of performances of two different kinds of ADCs, respectively for space and geophysics applications. New designs with their electrical circuits will be described for operation in the microwave frequency band with a sigma-delta architecture, and for improved dynamic range with a delta design. The performance in terms of number of bits or dynamic range, frequency bandwidth and ultimate sampling speed will be compared with the ones of existing ADCs. Considerations about the layout due to technological considerations are taken into account in the design. Trade-offs between performance and technologies will be emphasized.[1] K. Likharev and V. Semenov, IEEE Trans. Appl. Supercond. 1, 3 (1991).[2] T. Reich, P. Febvre, T. Ortlepp, F. H. Uhlmann, J. Kunert, R. Stolz, and H.-G. Meyer, Journal of Applied Physics 104(2), 024509 (2008).

•Apr 25, 2010•0 citations
We have developed a flux-quantizing A/D converter (ADC) based on RSFQ elements, employing a novel front end capable of generating high-linearity multibit differential code within a wide dynamic range (up to 16 bits). The front end operates as a phase modulator/demodulator and uses fractional-flux-quantum least significant bit (LSB). It runs at multi-GHz speed, enabling ADCs with large oversampling ratio and effective resolution in excess of 20 bits (after decimation filtering). We have designed, fabricated and tested several versions of a complete ADC using this new architecture and demonstrated its operation with dynamic range of 14 bits. We have also confirmed continuous phase modulation of the flux quantizer with a carrier frequency of 10 GHz.>
We have developed a new architecture for a superconducting high-resolution analog-to-digital converter (ADC) which is highly beneficial for IR array readout applications due to its high sensitivity, wide dynamic range and sub-mW power consumption. This ADC is based on the principles of magnetic flux quantization, direct differential coding and decimation filtering. The digital part of the ADC employs elements of the Rapid Single Flux Quantum logic family which are capable of clock frequencies in excess of 100 GHz. We discuss the limits of ADC performance and present an analysis of the power consumption in these ADCs. We also report experimental verification of several key components of this architecture in Niobium technology (operating at 4.2 K), particularly the implementation of a synchronizer unit (necessary for the generation of the differential digital code) as well as a dual-counter synchronous ADC.
We describe the design of a new oversampled analog-to-digital converter (ADC) based on phase modulation-demodulation (PMD) architecture. In a PMD ADC, the analog input signal modulates the phase of a periodic stream of fluxons applied to a modulator circuit for subsequent demodulation in a clocked synchronizer circuit to produce a digital code. The new modulator provides a way to quadruple the average fluxon transport rate, and hence the input dynamic range, by replacing the single junction interferometer with a high-speed symmetric divide-by-4 circuit. The divider acts as a 1:4 asynchronous demultiplexer which distributes incoming fluxons among its four quarter-rate outputs. This four-fold rate reduction, at the modulator output, allows one to increase the ADC maximum input slew rate to 2 fluxons per clock period, achieving 2 additional bits of resolution at the same sampling clock frequency. We have designed and fabricated a quarter-rate ADC front-end and present low frequency test results for the same. The ADC comprises a quarter-rate quantizer which has been successfully tested at an input frequency of 81.92 GHz.
Superconductor analog-to-digital converters (ADC) offer high sensitivity and large dynamic range. We report recent advances in the low-pass phase-modulation-demodulation (PMD) oversampled analog-to-digital converter (ADC). The oversampled data from the PMD front-end are passed along with sampling clock to an on-chip digital filter. In the past, the maximum frequency of operation of such chips were limited by that of the digital decimation filter (DDF) to about 30 GHz. Recently, we have designed a chip that allows the PMD front-end to be clocked twice as fast as the DDF, resulting in sampling rates of 46.08 GHz and 29.44 GHz for chips with critical current densities of 4.5 and 1 kA/cm2respectively. We have also designed a new PMD front-end, with a quarter-rate quantizer (QRQ) that allows 18-20 dB extension of dynamic range. We are also pursuing a subranging ADC design with two PMD front-ends connected with fluxon amplifier and subtractor circuitry that promises a dynamic range extension by 25-30 dB. We report signal-to-noise ratio and spur-free dynamic range measurement results for various ADC chips, and project performance for future improvements.
We have developed and verified experimentally a novel high-resolution superconducting ADC architecture based on phase modulation/demodulation principle and implemented in RSFQ logic. We have demonstrated an ADC chip providing full implementation of this architecture, including on-chip decimation filter and multiple-channel synchronizer. We have also developed a digital ADC evaluation system consisting of an interface electronics block converting the low-voltage ADC output to standard TTL form at multi-MHz sampling rate, and a computerized test station performing data acquisition, processing and display in real time. Using this system we have demonstrated that for low-frequency (kHz) signals our ADC chips possess linearity in excess of 16 bits with Spur-Free Dynamic Range over 108 dB, which is an important benchmark for any high-resolution ADC technology.
The sigma-delta architecture is the method of choice for analog-to-digital converters (ADCs) for high dynamic range applications. This architecture uses oversampling and precise feedback to generate a shaped spectral distribution of the quantization noise. Subsequent digital filtering suppresses out-of-band quantization noise, yielding a large signal to in-band noise ratio. A unique advantage of superconducting electronics is the availability of the flux quantum to provide quantum mechanically accurate feedback at GHz rates. Josephson digital technology extends sigma-delta ADCs from MHz sampling rates to GHz sampling rates, from kHz signal bandwidths to MHz signal bandwidths, with comparable or better dynamic range when compared to semiconductor implementations. This paper presents circuits for Josephson sigma-delta ADCs, including single-loop and double-loop modulators operating at sampling rates up to 2 GHz, and circuits for quantized feedback. The first demonstration of double-loop noise shaping is also presented.
Analog-to-digital converters (ADCs) are key components of most digital systems, as the necessary interface between the analogue world to send and receive signals. Semiconductor ADC systems are intrinsically limited to low frequency ranges of a few GHz and associated to dynamic ranges limited by linearity issues. Superconductor electronic ADCs rely on the magnetic flux quantization and do not suffer from the linearity issues. Moreover, the Rapid-Single-Flux Quantum (RSFQ) technique [1] allows the sampling of signals far in the microwave range, of the order of 100 GHz for the fastest circuits with state-of-the-art low critical temperature niobium-based technology.Two main applications require the use of fast and high dynamic range superconducting ADCs: future ground- or space-based telecommunication systems for software defined radio (SDR) and all systems requiring very high dynamic range in the 120-180 dB range. In this last category, one can find the digital Superconducting Quantum Interference Devices (SQUIDs) that combine the digitization due to the RSFQ technique, with the ultrasensitive sensing of magnetic fields, that are of interest for several applications, ranging from Non-Destructive Evaluation (NDE) to the detection of faint geomagnetic signatures [2].In this work, we will describe in details an analysis of performances of two different kinds of ADCs, respectively for space and geophysics applications. New designs with their electrical circuits will be described for operation in the microwave frequency band with a sigma-delta architecture, and for improved dynamic range with a delta design. The performance in terms of number of bits or dynamic range, frequency bandwidth and ultimate sampling speed will be compared with the ones of existing ADCs. Considerations about the layout due to technological considerations are taken into account in the design. Trade-offs between performance and technologies will be emphasized.[1] K. Likharev and V. Semenov, IEEE Trans. Appl. Supercond. 1, 3 (1991).[2] T. Reich, P. Febvre, T. Ortlepp, F. H. Uhlmann, J. Kunert, R. Stolz, and H.-G. Meyer, Journal of Applied Physics 104(2), 024509 (2008).