Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Electronics and Laser Science Conference

Integration of a tunable optical micro-cavity for single atom detection on an atom chip

Carsten Gollasch, Z. Moktadir, G. Lewis, Michael D. Kraft, Michael Trupke, S. Eriksson, Edward A. Hinds

Published May 1, 2007• 0 citations
Publisher

Abstract

Recent experiments demonstrated single-atom detection using microscopic optical cavities. Here we present an optical micro-cavity whose length can be tuned using an electrostatic comb-drive. This design is suitable for integration into a silicon atom chip.
DOI
10.1109/qels.2007.4431608

Related papers

Single-atom detection by micro-cavities

Péter Horák, Bruce G. Klappauf, Peter G. Kazansky

Possibilities of integrating micro-optics on top of an atom chip by standard fiber technology are investigated. In particular, the study is interested in single-atom detection with minimal spontaneous scattering.

European Quantum Electronics Conference (EQEC)•Jan 1, 2003•0 citations

Resonator-Aided Single-Atom Detection on a Microfabricated Chip

Igor Teper, Y.-J. Lin, Vladan Vuletić

We use an optical cavity to detect single atoms magnetically trapped on an atom chip. We implement the detection using both fluorescence into the cavity and atom-induced reduction in cavity transmission. In fluorescence, we register 2.0(2) photon counts per atom, which allows us to detect single atoms with 75% efficiency in 250 micros. In absorption, we measure transmission attenuation of 3.3(3)% per atom, which allows us to count small numbers of atoms with a resolution of about 1 atom.

arXiv:cond-mat/0603675•Physical Review Letters•Jul 14, 2006•73 citations

Towards an integrated atom chip

G. Lewis

The field of atom chips is a relatively new area of research which is rapidly becoming of great interest to the scientific community. It started out as a small branch of cold atom physics which has quickly grown into a multidisciplinary\nsubject. It now encompasses topics from fundamental atomic and quantum theory, optics and laser science, to the engineering of ultra sensitive sensors.\n\nIn this thesis the first steps are taken towards a truly integrated atom chip device for real world applications. Multiple devices are presented that allow the trapping, cooling, manipulation and counting of atoms. Each device presents a new component required for the integration and miniaturisation of atom chips\ninto a single device, capable of being used as a sensor.\n\nInitially, a wire trap was created capable of trapping and splitting a cloud of BoseEinstein condensate (BEC) for use in atom interferometry. Using this chip a BEC has been successfully created, trapped and coherent splitting of this cloud has been achieved.\n\nSubsequently, the integration and simplification of the initial trapping process was approached. In all the experiments to date, atoms are initially collected from a warm vapour by a magneto-optical trap (MOT). This thesis presents a new approach in which microscopic pyramidal MOTs’ are integrated into the chip itself. This greatly reduces the number of optical components and helps to simplify the process significantly.\n\nAlso presented is a method for creating a planar-concave micro-cavity capable of single atom detection. One such cavity consists of a concave mirror fabricated in silicon and the planar tip of an optical fibre. The performance of the resonators\nis highly dependent on the surface roughness and shape profile of the concave mirrors therefore a detailed study into the fabrication technique and its effects on these parameters was undertaken. Using such cavities single atom detection has been shown to be possible. These cavities have also been sccessfully integrated into an atom wire guide.\n\nFinally a co-sputtered amorphous silicon/titanium (a-Si/Ti) nanocomposite material was created and studied for its use as a novel structural material. This material is potentially suitable for integrated circuitry (IC)/Micro-electromechanical-\nsystems (MEMS) integration. The material’s electrical and\nstructural properties were investigated and initial results suggest that a-Si/Ti has the potential to be a compelling structural material for future IC/MEMS integration.\n\nTo build all of these devices, a full range of standard microfabrication techniques was necessary as well as some non standard processes that required considerable process development such as the electrochemical deposition.\n\nThis thesis presents a tool box of fabrication techniques for creating various components capable of different tasks that can be integrated into a single device. Each component has been successfully demonstrated in laboratory conditions. This represents a significant step toward a real world atom chip device.

•Mar 1, 2009•0 citations

Integration of a two-dimensional electrostatic actuator in a new generation of atom chips

Carsten Gollasch, Z. Moktadir, E. Koukharenko +5 more

Summary: In this paper we present an integrated atom chip design which incorporates a micromachined electrostatic actuator for optical cavity alignment. The two-dimensional actuator is fabricated by applying deep reactive ion etching techniques (DRIE) on a silicon-on-glass wafer. An actuation of 17.5 µm is achievable which is sufficient to compensate for the misalignment of the optical cavity during the fabrication process.

•Sep 1, 2004•0 citations

Fiber optics for quantum computers

Steve Helsby, Hebe Powell, Péter Horák +2 more

Abstract: We describe schemes for the integration of miniature optical components onto Atom Chips, for the manipulation and detection of ultra-cold atoms. Our intention is to build detectors sensitive enough to accurately detect single atoms. Two approaches are discussed: simple fluorescence detection and the use of a resonant cavity. Theory predicts that cavities with F>100 should be sufficient to obtain signal to noise ratios high enough to detect single atoms. The first micro cavities were demonstrated using mirrors formed by cleaved fiber ends coated with a stick-on dielectric coating to give F ∼100. A more successful approach involves the full integration of the mirrors and fibers by using Bragg gratings written into the fiber core: it has been possible to form gap cavities with F ~ 150. 1.

•Jan 1, 2004•0 citations

Fibre optics for atom detection

Steve Helsby, Péter Horák, Peter G. Kazansky

The paper reports on standard fibre optical components mounted onto the chip for single atom detection. At present, two main directions are being pursued: fluorescence detection and fibre Fabry-Perot gap cavities. Theoretical analysis has shown that both devices will have the ability to detect single atoms with the micro-cavities offering the possibility of non-destructive detection.

European Quantum Electronics Conference (EQEC)•Jan 18, 2006•0 citations
The field of atom chips is a relatively new area of research which is rapidly becoming of great interest to the scientific community. It started out as a small branch of cold atom physics which has quickly grown into a multidisciplinary\nsubject. It now encompasses topics from fundamental atomic and quantum theory, optics and laser science, to the engineering of ultra sensitive sensors.\n\nIn this thesis the first steps are taken towards a truly integrated atom chip device for real world applications. Multiple devices are presented that allow the trapping, cooling, manipulation and counting of atoms. Each device presents a new component required for the integration and miniaturisation of atom chips\ninto a single device, capable of being used as a sensor.\n\nInitially, a wire trap was created capable of trapping and splitting a cloud of BoseEinstein condensate (BEC) for use in atom interferometry. Using this chip a BEC has been successfully created, trapped and coherent splitting of this cloud has been achieved.\n\nSubsequently, the integration and simplification of the initial trapping process was approached. In all the experiments to date, atoms are initially collected from a warm vapour by a magneto-optical trap (MOT). This thesis presents a new approach in which microscopic pyramidal MOTs’ are integrated into the chip itself. This greatly reduces the number of optical components and helps to simplify the process significantly.\n\nAlso presented is a method for creating a planar-concave micro-cavity capable of single atom detection. One such cavity consists of a concave mirror fabricated in silicon and the planar tip of an optical fibre. The performance of the resonators\nis highly dependent on the surface roughness and shape profile of the concave mirrors therefore a detailed study into the fabrication technique and its effects on these parameters was undertaken. Using such cavities single atom detection has been shown to be possible. These cavities have also been sccessfully integrated into an atom wire guide.\n\nFinally a co-sputtered amorphous silicon/titanium (a-Si/Ti) nanocomposite material was created and studied for its use as a novel structural material. This material is potentially suitable for integrated circuitry (IC)/Micro-electromechanical-\nsystems (MEMS) integration. The material’s electrical and\nstructural properties were investigated and initial results suggest that a-Si/Ti has the potential to be a compelling structural material for future IC/MEMS integration.\n\nTo build all of these devices, a full range of standard microfabrication techniques was necessary as well as some non standard processes that required considerable process development such as the electrochemical deposition.\n\nThis thesis presents a tool box of fabrication techniques for creating various components capable of different tasks that can be integrated into a single device. Each component has been successfully demonstrated in laboratory conditions. This represents a significant step toward a real world atom chip device.
Abstract: We describe schemes for the integration of miniature optical components onto Atom Chips, for the manipulation and detection of ultra-cold atoms. Our intention is to build detectors sensitive enough to accurately detect single atoms. Two approaches are discussed: simple fluorescence detection and the use of a resonant cavity. Theory predicts that cavities with F>100 should be sufficient to obtain signal to noise ratios high enough to detect single atoms. The first micro cavities were demonstrated using mirrors formed by cleaved fiber ends coated with a stick-on dielectric coating to give F ∼100. A more successful approach involves the full integration of the mirrors and fibers by using Bragg gratings written into the fiber core: it has been possible to form gap cavities with F ~ 150. 1.