Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

European Quantum Electronics Conference (EQEC)

Fibre optics for atom detection

Steve Helsby, Péter Horák, Peter G. Kazansky

Published Jan 18, 2006• 0 citations
Publisher

Abstract

The paper reports on standard fibre optical components mounted onto the chip for single atom detection. At present, two main directions are being pursued: fluorescence detection and fibre Fabry-Perot gap cavities. Theoretical analysis has shown that both devices will have the ability to detect single atoms with the micro-cavities offering the possibility of non-destructive detection.

DOI
10.1109/eqec.2005.1567533

Related papers

Fiber optics for quantum computers

Steve Helsby, Hebe Powell, Péter Horák +2 more

Abstract: We describe schemes for the integration of miniature optical components onto Atom Chips, for the manipulation and detection of ultra-cold atoms. Our intention is to build detectors sensitive enough to accurately detect single atoms. Two approaches are discussed: simple fluorescence detection and the use of a resonant cavity. Theory predicts that cavities with F>100 should be sufficient to obtain signal to noise ratios high enough to detect single atoms. The first micro cavities were demonstrated using mirrors formed by cleaved fiber ends coated with a stick-on dielectric coating to give F ∼100. A more successful approach involves the full integration of the mirrors and fibers by using Bragg gratings written into the fiber core: it has been possible to form gap cavities with F ~ 150. 1.

•Jan 1, 2004•0 citations

The integration of fibre optics for atom chips

Stephen John Helsby

This thesis reports on the progress made towards the integration of fibre optics components for the atom chip, a device developed to manipulate matter on the atomic scale for the purpose of quantum information processing, novel applications, and fundamental research. Following in the direction of the electronics industry, miniaturisation has resulted in exquisite control of cold atoms above surfaces, allowing the vision of a matter wave toolbox to come closer to fruition. However, although the size of the components necessary for guiding atoms via magnetic or electrostatic fields has been greatly reduced, there is still a need to scale down the optical components. The development of these cavities is detailed in this thesis, from early use of evaporated gold coated mirrors to the fully integral solution of photorefractive Bragg gratings. In addition to a thorough analysis of the optical properties of these fibre gap cavities, experimental results indicate that these gap cavity devices can be constructed with the sensitivity necessary for single atom detection.

•Mar 1, 2008•0 citations

Single-atom detection by micro-cavities

Péter Horák, Bruce G. Klappauf, Peter G. Kazansky

Possibilities of integrating micro-optics on top of an atom chip by standard fiber technology are investigated. In particular, the study is interested in single-atom detection with minimal spontaneous scattering.

European Quantum Electronics Conference (EQEC)•Jan 1, 2003•0 citations

Single atom detection on an atom chip with integrated optics

Marco Wilzbach

The subject of this thesis is the miniaturization and integration of detectors for the detection of single rubidium atoms on an atom chip. For this purpose three different detectors were developed for atom detection by absorption or fluorescence: i) A fluorescence detector was realized by mounting a tapered lensed fiber perpendicular to a collection fiber. ii) An absorption detector was built by placing a multi-mode fiber in-line with a tapered lensed fiber. iii) A tunable cavity detector was built from two single mode fibers mounted on the chip surface. To mount the detectors on the planar surface of the atom chip retaining structures by means of lithographical techniques were developed. Those structures allow a very accurate and stable passive fiber alignment. To test the individual detectors an atomic ensemble of thermal rubidium atoms was prepared in a magneto-optical trap. Then the atoms were transferred into magnetic micro-traps of the atom chip and were guided to one of the detectors. Each integrated detector has been evaluated by several characterization measurements. With the fluorescence detector the highest single atom detection efficiency of 54\\% was attained. Thereby it was possible to perform quantitative measurements for the magnetically guided atoms on a single atom level and to study fundamental properties of the confined atoms.

•Jan 1, 2007•0 citations

Detecting Neutral Atoms on an Atom Chip

Marco Wilzbach, Albrecht Haase, Michael Schwarz +8 more

This chapter contains sections titled: Introduction Detecting Single Atoms Measuring the Scattered Light: Fluorescence Detection Measuring the Driving Field Absorption on Resonance Refraction Cavities Absorption on Resonance Refraction Many Atoms in a Cavity Concentric Cavity Miniaturization Properties of Fiber Cavities Loss Mechanisms for a Cavity Losses due to the Gap Length Losses due to Transversal Misalignment Losses due to Angular Misalignment Fresnel Reflections Other Fiber Optical Components for the Atom Chip Fluorescence and Absorption Detectors A Single Mode Tapered Lensed Fiber Dipole Trap Integration of Fibers on the Atom Chip Building Fiber Cavities The SU-8 Resist Test of the SU-8 Structure Pilot Test for Atom Detection with Small Waists Dropping Atoms through a Concentric Cavity Detecting Magnetically Guided Atoms Conclusion References

Wiley eBooks•Jan 26, 2007•1 citation

Towards an integrated atom chip

G. Lewis

The field of atom chips is a relatively new area of research which is rapidly becoming of great interest to the scientific community. It started out as a small branch of cold atom physics which has quickly grown into a multidisciplinary\nsubject. It now encompasses topics from fundamental atomic and quantum theory, optics and laser science, to the engineering of ultra sensitive sensors.\n\nIn this thesis the first steps are taken towards a truly integrated atom chip device for real world applications. Multiple devices are presented that allow the trapping, cooling, manipulation and counting of atoms. Each device presents a new component required for the integration and miniaturisation of atom chips\ninto a single device, capable of being used as a sensor.\n\nInitially, a wire trap was created capable of trapping and splitting a cloud of BoseEinstein condensate (BEC) for use in atom interferometry. Using this chip a BEC has been successfully created, trapped and coherent splitting of this cloud has been achieved.\n\nSubsequently, the integration and simplification of the initial trapping process was approached. In all the experiments to date, atoms are initially collected from a warm vapour by a magneto-optical trap (MOT). This thesis presents a new approach in which microscopic pyramidal MOTs’ are integrated into the chip itself. This greatly reduces the number of optical components and helps to simplify the process significantly.\n\nAlso presented is a method for creating a planar-concave micro-cavity capable of single atom detection. One such cavity consists of a concave mirror fabricated in silicon and the planar tip of an optical fibre. The performance of the resonators\nis highly dependent on the surface roughness and shape profile of the concave mirrors therefore a detailed study into the fabrication technique and its effects on these parameters was undertaken. Using such cavities single atom detection has been shown to be possible. These cavities have also been sccessfully integrated into an atom wire guide.\n\nFinally a co-sputtered amorphous silicon/titanium (a-Si/Ti) nanocomposite material was created and studied for its use as a novel structural material. This material is potentially suitable for integrated circuitry (IC)/Micro-electromechanical-\nsystems (MEMS) integration. The material’s electrical and\nstructural properties were investigated and initial results suggest that a-Si/Ti has the potential to be a compelling structural material for future IC/MEMS integration.\n\nTo build all of these devices, a full range of standard microfabrication techniques was necessary as well as some non standard processes that required considerable process development such as the electrochemical deposition.\n\nThis thesis presents a tool box of fabrication techniques for creating various components capable of different tasks that can be integrated into a single device. Each component has been successfully demonstrated in laboratory conditions. This represents a significant step toward a real world atom chip device.

•Mar 1, 2009•0 citations
The paper reports on standard fibre optical components mounted onto the chip for single atom detection. At present, two main directions are being pursued: fluorescence detection and fibre Fabry-Perot gap cavities. Theoretical analysis has shown that both devices will have the ability to detect single atoms with the micro-cavities offering the possibility of non-destructive detection.
Abstract: We describe schemes for the integration of miniature optical components onto Atom Chips, for the manipulation and detection of ultra-cold atoms. Our intention is to build detectors sensitive enough to accurately detect single atoms. Two approaches are discussed: simple fluorescence detection and the use of a resonant cavity. Theory predicts that cavities with F>100 should be sufficient to obtain signal to noise ratios high enough to detect single atoms. The first micro cavities were demonstrated using mirrors formed by cleaved fiber ends coated with a stick-on dielectric coating to give F ∼100. A more successful approach involves the full integration of the mirrors and fibers by using Bragg gratings written into the fiber core: it has been possible to form gap cavities with F ~ 150. 1.
This thesis reports on the progress made towards the integration of fibre optics components for the atom chip, a device developed to manipulate matter on the atomic scale for the purpose of quantum information processing, novel applications, and fundamental research. Following in the direction of the electronics industry, miniaturisation has resulted in exquisite control of cold atoms above surfaces, allowing the vision of a matter wave toolbox to come closer to fruition. However, although the size of the components necessary for guiding atoms via magnetic or electrostatic fields has been greatly reduced, there is still a need to scale down the optical components. The development of these cavities is detailed in this thesis, from early use of evaporated gold coated mirrors to the fully integral solution of photorefractive Bragg gratings. In addition to a thorough analysis of the optical properties of these fibre gap cavities, experimental results indicate that these gap cavity devices can be constructed with the sensitivity necessary for single atom detection.
The subject of this thesis is the miniaturization and integration of detectors for the detection of single rubidium atoms on an atom chip. For this purpose three different detectors were developed for atom detection by absorption or fluorescence: i) A fluorescence detector was realized by mounting a tapered lensed fiber perpendicular to a collection fiber. ii) An absorption detector was built by placing a multi-mode fiber in-line with a tapered lensed fiber. iii) A tunable cavity detector was built from two single mode fibers mounted on the chip surface. To mount the detectors on the planar surface of the atom chip retaining structures by means of lithographical techniques were developed. Those structures allow a very accurate and stable passive fiber alignment. To test the individual detectors an atomic ensemble of thermal rubidium atoms was prepared in a magneto-optical trap. Then the atoms were transferred into magnetic micro-traps of the atom chip and were guided to one of the detectors. Each integrated detector has been evaluated by several characterization measurements. With the fluorescence detector the highest single atom detection efficiency of 54\\% was attained. Thereby it was possible to perform quantitative measurements for the magnetically guided atoms on a single atom level and to study fundamental properties of the confined atoms.
This chapter contains sections titled: Introduction Detecting Single Atoms Measuring the Scattered Light: Fluorescence Detection Measuring the Driving Field Absorption on Resonance Refraction Cavities Absorption on Resonance Refraction Many Atoms in a Cavity Concentric Cavity Miniaturization Properties of Fiber Cavities Loss Mechanisms for a Cavity Losses due to the Gap Length Losses due to Transversal Misalignment Losses due to Angular Misalignment Fresnel Reflections Other Fiber Optical Components for the Atom Chip Fluorescence and Absorption Detectors A Single Mode Tapered Lensed Fiber Dipole Trap Integration of Fibers on the Atom Chip Building Fiber Cavities The SU-8 Resist Test of the SU-8 Structure Pilot Test for Atom Detection with Small Waists Dropping Atoms through a Concentric Cavity Detecting Magnetically Guided Atoms Conclusion References
The field of atom chips is a relatively new area of research which is rapidly becoming of great interest to the scientific community. It started out as a small branch of cold atom physics which has quickly grown into a multidisciplinary\nsubject. It now encompasses topics from fundamental atomic and quantum theory, optics and laser science, to the engineering of ultra sensitive sensors.\n\nIn this thesis the first steps are taken towards a truly integrated atom chip device for real world applications. Multiple devices are presented that allow the trapping, cooling, manipulation and counting of atoms. Each device presents a new component required for the integration and miniaturisation of atom chips\ninto a single device, capable of being used as a sensor.\n\nInitially, a wire trap was created capable of trapping and splitting a cloud of BoseEinstein condensate (BEC) for use in atom interferometry. Using this chip a BEC has been successfully created, trapped and coherent splitting of this cloud has been achieved.\n\nSubsequently, the integration and simplification of the initial trapping process was approached. In all the experiments to date, atoms are initially collected from a warm vapour by a magneto-optical trap (MOT). This thesis presents a new approach in which microscopic pyramidal MOTs’ are integrated into the chip itself. This greatly reduces the number of optical components and helps to simplify the process significantly.\n\nAlso presented is a method for creating a planar-concave micro-cavity capable of single atom detection. One such cavity consists of a concave mirror fabricated in silicon and the planar tip of an optical fibre. The performance of the resonators\nis highly dependent on the surface roughness and shape profile of the concave mirrors therefore a detailed study into the fabrication technique and its effects on these parameters was undertaken. Using such cavities single atom detection has been shown to be possible. These cavities have also been sccessfully integrated into an atom wire guide.\n\nFinally a co-sputtered amorphous silicon/titanium (a-Si/Ti) nanocomposite material was created and studied for its use as a novel structural material. This material is potentially suitable for integrated circuitry (IC)/Micro-electromechanical-\nsystems (MEMS) integration. The material’s electrical and\nstructural properties were investigated and initial results suggest that a-Si/Ti has the potential to be a compelling structural material for future IC/MEMS integration.\n\nTo build all of these devices, a full range of standard microfabrication techniques was necessary as well as some non standard processes that required considerable process development such as the electrochemical deposition.\n\nThis thesis presents a tool box of fabrication techniques for creating various components capable of different tasks that can be integrated into a single device. Each component has been successfully demonstrated in laboratory conditions. This represents a significant step toward a real world atom chip device.