Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Aluminium free active region 780nm tapered semiconductor optical amplifiers for Rubidium pumping

A. Jammot, J. Bébé Manga Lobé, Marco Lamponi, Y. Robert, E. Vinet, M. Lecomte, M. Garcia, O. Parillaud, M. Krakowski

Published May 1, 2013• 1 citation
Publisher

Abstract

Here we present a new tapered semiconductor optical amplifier (SOA) structure that exhibits more than 600 mW output power at a wavelength of 780 nm.
DOI
10.1109/cleoe-iqec.2013.6800735

Related papers

High performance of semiconductor optical amplifier available for cold atom physics research

马千里 Qianli, 夏林 Lin Xia, 鹿博 Bo Lu +4 more

We present a novel design of a compact, stable, and easy-adjustable semiconductor optical amplifier (SOA) system.This SOA system is capable of providing up to 560-mW laser power at the wavelength of 852 nm.For the continuous-wave (CW) seeding laser, the amplification gain can reach 18 dB.We add amplitude modulation onto the CW laser and measure the modulation amplification between seeding and output laser.The amplification gain remains constant within the frequency range from 10 Hz to 1 MHz.The whole system could work in ultra-stable condition: for CW seeding laser, the fluctuation of output power is less than 0.33% in several hours.

Chinese Optics Letters•Jan 1, 2009•2 citations

Note: Efficient generation of optical sidebands at GHz with a high-power tapered amplifier

Jake Zappala, K. Bailey, Zheng‐Tian Lu +2 more

Two methods using a laser-diode tapered amplifier to produce high-power, high-efficiency optical frequency sidebands over a wide tunable frequency range are studied and compared. For a total output of 500 mW at 811 nm, 20% of the power can be placed in each of the first-order sidebands. Functionality and characterization are presented within the sideband frequency region of 0.8-2.3 GHz, and it is shown that both methods can be applied beyond this frequency range. These methods provide a versatile and effective tool for atomic physics experiments.

Review of Scientific Instruments•Apr 1, 2014•2 citations

Broad-Band All-Optical Flip–Flop Based on Optical Bistability in an Integrated SOA/DFB-SOA

Young‐Il Kim, J.H. Kim, S. Lee +3 more

We have demonstrated a broad-band all-optical flip-flop for wavelength-division-multiplexing system based on optical bistability in a semiconductor optical amplifier (SOA)/distributed feedback (DFB)-SOA with wide gain bandwidth for both SOA and DFB-SOA regions. Input signal with two different wavelength selections of 1530.45 and 1578.12 nm and the repetition ration of about 6 ns is injected into the SOA/DFB-SOA.

IEEE Photonics Technology Letters•Feb 1, 2004•38 citations

Delay limit of slow light in semiconductor optical amplifiers

Alexander V. Uskov, Forrest G. Sedgwick, Connie J. Chang-Hasnain

In contrast to absorbers, where the delay time via wave mixing saturates to its maximum with increasing device length due to decay of pump power along the device, in semiconductor optical amplifiers (SOAs) the delay time increases with the device length and is limited by the corresponding growth of the SOA gain, which can lead to unacceptable amplified stimulated emission in the SOA. The number of pulses which can be stored in an SOA, defined by the gain and group velocity dispersion, also is given ultimately by this SOA gain limitation, and is estimated between one and two.

IEEE Photonics Technology Letters•Mar 1, 2006•33 citations

Tunable slow light in semiconductor optical amplifier without external pump laser

Peng‐Chun Peng, W. C. Kao, Jason Jyehong Chen +4 more

This investigation experimentally demonstrates tunable slow light in a semiconductor optical amplifier (SOA) without an external pump laser. Tunable time delays are achieved by adjusting the feedback signal from the SOA.

European Conference on Optical Communication•Jan 1, 2008•0 citations

Fast, powerful, low-noise optical pumping of an atomic vapor with semiconductor optical amplifiers

Diana Méndez-Avalos, Théo Louzada Meireles, Morgan W. Mitchell +1 more

We use a $^{87}\text{Rb}$ atomic vapor, suitable for an optically-pumped magnetometer (OPM) in Earth-field conditions, to study the noise properties of three strategies for generating pulsed optical pumping. We compare a frequency-modulated (FM) laser, amplitude modulation (AM) via an acousto-optic modulator (AOM), and amplitude modulation via a semiconductor optical amplifier (SOA). Pumping the ensemble to operate as a Bell-Bloom OPM, and with an equal degree of spin polarization, the three methods give nearly identical sensitivity, showing that the SOA, despite being an active device, can introduce negligible additional noise. Pumping the ensemble to operate as a free-induction-decay OPM, we observe longer unpumped coherence times with the SOA-AM method than with the FM method. Finally, using the higher power available from the SOA, we demonstrate an environment-limited sensitivity of $80\text{fT}/\sqrt{\text{Hz}}$ at $600\text{Hz}$ and 200fT$200\text{fT}/\sqrt{\text{Hz}}$ at $4\text{kHz}$, one to two orders of magnitude beyond what was achievable with the other pumping methods.

physics.atom-phCross-listedarXiv:2604.26721•Apr 30, 2026•0 citations
We present a novel design of a compact, stable, and easy-adjustable semiconductor optical amplifier (SOA) system.This SOA system is capable of providing up to 560-mW laser power at the wavelength of 852 nm.For the continuous-wave (CW) seeding laser, the amplification gain can reach 18 dB.We add amplitude modulation onto the CW laser and measure the modulation amplification between seeding and output laser.The amplification gain remains constant within the frequency range from 10 Hz to 1 MHz.The whole system could work in ultra-stable condition: for CW seeding laser, the fluctuation of output power is less than 0.33% in several hours.
Two methods using a laser-diode tapered amplifier to produce high-power, high-efficiency optical frequency sidebands over a wide tunable frequency range are studied and compared. For a total output of 500 mW at 811 nm, 20% of the power can be placed in each of the first-order sidebands. Functionality and characterization are presented within the sideband frequency region of 0.8-2.3 GHz, and it is shown that both methods can be applied beyond this frequency range. These methods provide a versatile and effective tool for atomic physics experiments.
In contrast to absorbers, where the delay time via wave mixing saturates to its maximum with increasing device length due to decay of pump power along the device, in semiconductor optical amplifiers (SOAs) the delay time increases with the device length and is limited by the corresponding growth of the SOA gain, which can lead to unacceptable amplified stimulated emission in the SOA. The number of pulses which can be stored in an SOA, defined by the gain and group velocity dispersion, also is given ultimately by this SOA gain limitation, and is estimated between one and two.
We use a 87Rb^{87}\text{Rb}87Rb atomic vapor, suitable for an optically-pumped magnetometer (OPM) in Earth-field conditions, to study the noise properties of three strategies for generating pulsed optical pumping. We compare a frequency-modulated (FM) laser, amplitude modulation (AM) via an acousto-optic modulator (AOM), and amplitude modulation via a semiconductor optical amplifier (SOA). Pumping the ensemble to operate as a Bell-Bloom OPM, and with an equal degree of spin polarization, the three methods give nearly identical sensitivity, showing that the SOA, despite being an active device, can introduce negligible additional noise. Pumping the ensemble to operate as a free-induction-decay OPM, we observe longer unpumped coherence times with the SOA-AM method than with the FM method. Finally, using the higher power available from the SOA, we demonstrate an environment-limited sensitivity of 80fT/Hz80\text{fT}/\sqrt{\text{Hz}}80fT/Hz​ at 600Hz600\text{Hz}600Hz and 200fT200fT/Hz200\text{fT}/\sqrt{\text{Hz}}200fT/Hz​ at 4kHz4\text{kHz}4kHz, one to two orders of magnitude beyond what was achievable with the other pumping methods.