Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Wiley eBooks

Lasers and Amplifiers

Hans‐A. Bachor, Timothy C. Ralph

Published Jul 5, 2019• 0 citations
Publisher

Abstract

The laser is the key component in any quantum optics experiment. The performance of a laser can be described by the following parameters: optical power, spatial mode structure, output wavelength, frequency spectrum, and noise spectrum. The spatial properties of the laser beams are determined by the properties of the optical resonator. Lasers are available that produce output beams, which are very close to the theoretical limit. In order to determine the dynamics of the fluctuations of the laser system, a quantum model is required. Diode lasers use the band gap in doped semiconductor materials to produce optical gain directly from an electrical current. The chapter focuses on continuous-wave lasers since they are very common in quantum optics experiments, in precision metrology. It considers the theoretical limits to amplification of quantum limited light and discusses the theory of the non-linear interaction. The chapter discusses the measurement-based quantum amplifiers based on electro-optic feed forward and heralded devices based on photon counting.

DOI
10.1002/9783527695805.ch6

Related papers

Basic Optical Components

Hans‐A. Bachor, Timothy C. Ralph

In quantum optics experiments light is considered as laser beams or modes of radiation. This chapter describes the effect of the various components on a single spatial and temporal mode. It explains the concept of linear systems, beamsplitters, interferometers, and resonators that can be used to describe many devices. The chapter summarizes the many practical ways of building beamsplitters, interferometers, and resonators that have been developed to create devices that use the principles of quantum physics. One of the most common and simplest optical components is a mirror. A mirror has two output beams for every input beam, one transmitted and the other reflected. The chapter analyses the properties of a beamsplitter. The beamsplitter acts like a random selector for the photons. The chapter considers a quantum model of the interferometer. It also considers the intensity noise observed at the interferometer output when a bright beam is incident.

Wiley eBooks•Jul 5, 2019•2 citations

Laser Amplifiers

Bahaa E. A. Saleh, Malvin Carl Teich

A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.

Wiley eBooks•Aug 14, 1991•2 citations

Introduction

Hans‐A. Bachor, Timothy C. Ralph

This introduction presents an overview of key concepts discussed in the subsequent chapters of this book. The book focuses on a classical model of light. It presents the properties of optical components and devices. The book provides a detailed description of lasers and amplifiers. It also presents a detailed discussion of photodetection for single photons and beams. The book explores the technical details required for reliable experimentation with quantum noise, including techniques such as cavity locking and feedback controller. It introduces the concept of squeezing is central to most attempts to improve optical devices beyond the quantum noise limit. The book describes the various squeezing experiments and discusses their results. It describes the applications of squeezed light with a detailed description of the largest application, the detection of gravitational waves. The book also discusses quantum non-demolition experiments.

Wiley eBooks•Jul 5, 2019•0 citations

Classical Models of Light

Hans‐A. Bachor, Timothy C. Ralph

Transmitting information in various forms, such as intensity, phase, polarization, and spatial changes, is the biggest use of optics. In this chapter, the authors develop classical models suited to describing light. The measurement of the statistical properties of light can be carried out in two alternative ways: either through a measurement of the fluctuations themselves in the form of temporal noise traces or noise spectra or, alternatively, through the measurement of coherence or correlation functions. Laser light is generated inside a cavity, constructed of mirrors, by multiple interference of waves and simultaneous amplification. These processes result in a well-defined, stable field distribution inside the cavity, the so-called cavity modes. The spatial shape of the laser beam with its very narrow focus is the key for many applications of laser light. The various aspects of the measurement and manipulation of laser beams occur at different timescales and at their corresponding frequencies.

Wiley eBooks•Jul 5, 2019•0 citations

Chapter 5

Michael A. Parker

Quantum theory has formed a cornerstone for modern physics, engineering, and chemistry since the 1920s. It has found significant modern applications in engineering since the development of the semiconductor diode, transistor, and especially the laser in the 1960s. Not until the 1980s did the fabrication and materials growth technology become sufficiently developed to provide the ability to (1) produce quantum well devices (such as quantum well lasers) and (2) engineer the optical and electrical properties of materials (band-gap engineering). One purpose of this chapter is to summarize a small portion of modern quantum theory. The first few sections of this chapter summarize Lagrange and Hamilton’s approach to classical mechanics. These alternate formulations to Newton’s formulation of classical mechanics allow us to use scalar quantities such as kinetic or potential energy to find the equations of motion. These alternate formulations are so powerful that they can be used to deduce Maxwell’s and other continuous field equations. In fact, the quantum mechanical Hamiltonian comes from the classical one by substituting operators for the classical dynamical variables. The chapter discusses the connection between linear algebra and quantum mechanics and reviews the basic theory. The discussion of the harmonic oscillator introduces the ladder operators and vacuum state, and prepares the way for the harmonic oscillator theory of the electromagnetic field encounter in quantum optics. The chapter includes quantum mechanical representation theory along with the time dependent perturbation theory. The density operator plays a central role in emission and absorption theory.

CRC Press eBooks•Oct 3, 2018•0 citations

Quantum Imaging: Fundamentals And Promises

Mikhail I. Kolobov

Quantum imaging can be defined as an area of quantum optics that investigates the ultimate performance limits of optical imaging allowed by the quantum nature of light. Quantum Imaging techniques possess a high potential for improving the performance in recording, storage, and readout of optical images beyond the limits set by the standard quantum level of fluctuations known as the shot noise. This talk aims at giving an overview of the fundamentals of Quantum Imaging as well as its most important directions. We shall discuss generation of the spatially multimode squeezed states of light be means of a travelling-wave optical parametric amplifier. We shall demonstrate that this kind of light allows us to reduce the spatial fluctuations of the photocurrent in a properly chosen homodyne detection scheme with a highly efficient CCD camera. It will be shown that using the amplified quadrature of the light wave in a travelling-wave optical parametric amplifier, one can perform noiseless amplification of optical images. We shall provide recent experimental results demonstrating a single-shot noiseless image amplification by a pulsed optical parametric amplifier. One of important experimental achievements of Quantum Imaging, coined in the literature as quantum laser pointer, is a precise measurement of position and transverse displacement of a laser beam with resolution beyond the limit imposed by the shot noise. We shall describe briefly the idea of the experiment in which the transverse displacement of a laser beam was measured with resolution of the order of Angstrom. The problem of precise measurement of transverse displacement of a light beam brings us to a more general question about the quantum limits of optical resolution. The classical resolution criterion, derived in the nineteen century by Abbe and Rayleigh, states that the resolution of an optical instrument is limited by diffraction and is related to the wavelength of the light used in the imaging scheme. However, it was for a long time recognised in the literature that in some cases when one has some a priori information about the object, one can improve the resolution beyond the Rayleigh limit using the so-called super-resolution techniques. As a final topic in this talk, we shall discuss the quantum limits of optical super-resolution. In particular, we shall formulate the standard quantum limit of super-resolution and demonstrate how one can go beyond this limit using specially designed multimode squeezed light.

Qatar Foundation Annual Research Forum Volume 2013 Issue 1•Jan 1, 2013•0 citations
The laser is the key component in any quantum optics experiment. The performance of a laser can be described by the following parameters: optical power, spatial mode structure, output wavelength, frequency spectrum, and noise spectrum. The spatial properties of the laser beams are determined by the properties of the optical resonator. Lasers are available that produce output beams, which are very close to the theoretical limit. In order to determine the dynamics of the fluctuations of the laser system, a quantum model is required. Diode lasers use the band gap in doped semiconductor materials to produce optical gain directly from an electrical current. The chapter focuses on continuous-wave lasers since they are very common in quantum optics experiments, in precision metrology. It considers the theoretical limits to amplification of quantum limited light and discusses the theory of the non-linear interaction. The chapter discusses the measurement-based quantum amplifiers based on electro-optic feed forward and heralded devices based on photon counting.
In quantum optics experiments light is considered as laser beams or modes of radiation. This chapter describes the effect of the various components on a single spatial and temporal mode. It explains the concept of linear systems, beamsplitters, interferometers, and resonators that can be used to describe many devices. The chapter summarizes the many practical ways of building beamsplitters, interferometers, and resonators that have been developed to create devices that use the principles of quantum physics. One of the most common and simplest optical components is a mirror. A mirror has two output beams for every input beam, one transmitted and the other reflected. The chapter analyses the properties of a beamsplitter. The beamsplitter acts like a random selector for the photons. The chapter considers a quantum model of the interferometer. It also considers the intensity noise observed at the interferometer output when a bright beam is incident.
A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.
This introduction presents an overview of key concepts discussed in the subsequent chapters of this book. The book focuses on a classical model of light. It presents the properties of optical components and devices. The book provides a detailed description of lasers and amplifiers. It also presents a detailed discussion of photodetection for single photons and beams. The book explores the technical details required for reliable experimentation with quantum noise, including techniques such as cavity locking and feedback controller. It introduces the concept of squeezing is central to most attempts to improve optical devices beyond the quantum noise limit. The book describes the various squeezing experiments and discusses their results. It describes the applications of squeezed light with a detailed description of the largest application, the detection of gravitational waves. The book also discusses quantum non-demolition experiments.
Transmitting information in various forms, such as intensity, phase, polarization, and spatial changes, is the biggest use of optics. In this chapter, the authors develop classical models suited to describing light. The measurement of the statistical properties of light can be carried out in two alternative ways: either through a measurement of the fluctuations themselves in the form of temporal noise traces or noise spectra or, alternatively, through the measurement of coherence or correlation functions. Laser light is generated inside a cavity, constructed of mirrors, by multiple interference of waves and simultaneous amplification. These processes result in a well-defined, stable field distribution inside the cavity, the so-called cavity modes. The spatial shape of the laser beam with its very narrow focus is the key for many applications of laser light. The various aspects of the measurement and manipulation of laser beams occur at different timescales and at their corresponding frequencies.
Quantum theory has formed a cornerstone for modern physics, engineering, and chemistry since the 1920s. It has found significant modern applications in engineering since the development of the semiconductor diode, transistor, and especially the laser in the 1960s. Not until the 1980s did the fabrication and materials growth technology become sufficiently developed to provide the ability to (1) produce quantum well devices (such as quantum well lasers) and (2) engineer the optical and electrical properties of materials (band-gap engineering). One purpose of this chapter is to summarize a small portion of modern quantum theory. The first few sections of this chapter summarize Lagrange and Hamilton’s approach to classical mechanics. These alternate formulations to Newton’s formulation of classical mechanics allow us to use scalar quantities such as kinetic or potential energy to find the equations of motion. These alternate formulations are so powerful that they can be used to deduce Maxwell’s and other continuous field equations. In fact, the quantum mechanical Hamiltonian comes from the classical one by substituting operators for the classical dynamical variables. The chapter discusses the connection between linear algebra and quantum mechanics and reviews the basic theory. The discussion of the harmonic oscillator introduces the ladder operators and vacuum state, and prepares the way for the harmonic oscillator theory of the electromagnetic field encounter in quantum optics. The chapter includes quantum mechanical representation theory along with the time dependent perturbation theory. The density operator plays a central role in emission and absorption theory.
Quantum imaging can be defined as an area of quantum optics that investigates the ultimate performance limits of optical imaging allowed by the quantum nature of light. Quantum Imaging techniques possess a high potential for improving the performance in recording, storage, and readout of optical images beyond the limits set by the standard quantum level of fluctuations known as the shot noise. This talk aims at giving an overview of the fundamentals of Quantum Imaging as well as its most important directions. We shall discuss generation of the spatially multimode squeezed states of light be means of a travelling-wave optical parametric amplifier. We shall demonstrate that this kind of light allows us to reduce the spatial fluctuations of the photocurrent in a properly chosen homodyne detection scheme with a highly efficient CCD camera. It will be shown that using the amplified quadrature of the light wave in a travelling-wave optical parametric amplifier, one can perform noiseless amplification of optical images. We shall provide recent experimental results demonstrating a single-shot noiseless image amplification by a pulsed optical parametric amplifier. One of important experimental achievements of Quantum Imaging, coined in the literature as quantum laser pointer, is a precise measurement of position and transverse displacement of a laser beam with resolution beyond the limit imposed by the shot noise. We shall describe briefly the idea of the experiment in which the transverse displacement of a laser beam was measured with resolution of the order of Angstrom. The problem of precise measurement of transverse displacement of a light beam brings us to a more general question about the quantum limits of optical resolution. The classical resolution criterion, derived in the nineteen century by Abbe and Rayleigh, states that the resolution of an optical instrument is limited by diffraction and is related to the wavelength of the light used in the imaging scheme. However, it was for a long time recognised in the literature that in some cases when one has some a priori information about the object, one can improve the resolution beyond the Rayleigh limit using the so-called super-resolution techniques. As a final topic in this talk, we shall discuss the quantum limits of optical super-resolution. In particular, we shall formulate the standard quantum limit of super-resolution and demonstrate how one can go beyond this limit using specially designed multimode squeezed light.