We introduce a multirobust quantum control strategy designed to suppress multilevel leakage outside the computational qubit space while simultaneously ensuring robustness against unknown inhomogeneities in control parameters. It is based on a reformulation of the derivative removal by adiabatic gate (DRAG) technique which allows for the full incorporation of control pulses originally designed for two-level models by using the iterative quantum Kolmogorov-Arnold-Moser (KAM) algorithm. We apply it for optimal robust control designed by inverse optimization (RIO), referred to as RDK pulses. We analyze the performance of RDK pulses on various durations, iterations, and robustness types. We show that the two-level robustness is restored after only a few iterations with an asymptotic exponential approximation (i.e., as a superasymptotic series), even for relatively short pulse durations, and that the resulting pulses are near optimal in terms of energy compared to the optimal RIO pulses defined in the qubit subspace. Such pulses are well suited for superconducting transmons as well as other forms of qubits embedded in a multilevel structure. By effectively reproducing a two-level dynamics within a multilevel system, this approach is versatile thanks to its compatibility with two-level control strategies under conditions (smoothness, duration) that are analyzed.
We introduce a multirobust quantum control strategy designed to suppress multilevel leakage outside the computational qubit space while simultaneously ensuring robustness against unknown inhomogeneities in control parameters. It is based on a reformulation of the derivative removal by adiabatic gate (DRAG) technique which allows for the full incorporation of control pulses originally designed for two-level models by using the iterative quantum Kolmogorov-Arnold-Moser (KAM) algorithm. We apply it for optimal robust control designed by inverse optimization (RIO), referred to as RDK pulses. We analyze the performance of RDK pulses on various durations, iterations, and robustness types. We show that the two-level robustness is restored after only a few iterations with an asymptotic exponential approximation (i.e., as a superasymptotic series), even for relatively short pulse durations, and that the resulting pulses are near optimal in terms of energy compared to the optimal RIO pulses defined in the qubit subspace. Such pulses are well suited for superconducting transmons as well as other forms of qubits embedded in a multilevel structure. By effectively reproducing a two-level dynamics within a multilevel system, this approach is versatile thanks to its compatibility with two-level control strategies under conditions (smoothness, duration) that are analyzed.
One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below 2.0×10−5, and obtain fidelities above 99.98% for pulse durations down to 6.8 ns for both X and X/2 gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below 10−6. The presented approach can be readily applied to other qubit types as well.
We develop an inverse geometric optimization technique that allows the derivation of optimal and robust exact solutions of low-dimension quantum control problems driven by external fields. We determine in the dynamical variable space optimal trajectories constrained to robust solutions by Euler-Lagrange optimization; the control fields are then derived from the obtained robust geodesics and the inverted dynamical equations. We apply this method, referred to as robust inverse optimization (RIO), to design optimal control fields producing a complete or half population transfer and a not quantum gate robust with respect to the pulse inhomogeneities. The method is versatile and can be applied to numerous quantum control problems, e.g., other gates, other types of imperfections, Raman processes, or dynamical decoupling of undesirable effects.
Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024
High-fidelity control of superconducting qubits requires carefully shaped microwave pulses to avoid several different kinds of error at once. This article is a pedagogical bridging text aimed at upper-level undergraduate and early graduate students who have completed an introductory quantum mechanics course and a first course in quantum computing or quantum information, but who have not yet encountered the physical implementation of qubit gates. We integrate physical intuition for pulse design, analytical gate-level descriptions, and practical hardware considerations into a single, derivation-driven narrative, with explicit learning objectives. We begin with simple pulse envelopes and their spectral properties, showing how finite bandwidth produces leakage outside the computational subspace. This motivates the derivative removal by adiabatic gate (DRAG) technique, which we derive explicitly using the Magnus expansion, obtaining a clear, order-by-order account of which physical error channel appears at which order and why DRAG's cancellation is necessarily incomplete. We discuss the practical hardware realities of control pulse generation, focusing on arbitrary waveform generators (AWG), local oscillators (LO), and IQ mixing. Finally, we extend the discussion to two-qubit operation via the cross-resonance gate, and interpret how driving the control qubit at the target qubit's transition frequency necessarily produces several unwanted interaction terms alongside the desired one, and how successive generations of pulse-engineering strategies have been designed to suppress them.
Adiabatic or slowly varying gate operations are typically required in order to remain within the qubit subspace in an anharmonic oscillator. However significant speed ups are possible by using the two quadrature derivative-removal-by-adiabatic-gate(DRAG) technique, where a second time derivative pulse component burns a spectral hole near an unwanted transition. It is shown here, that simultaneous optimization of the detuning and the pulse norm in addition, further reduces leakage errors and significantly improve gate fidelities. However, with this optimization accounting for the AC Stark shift, there is a low spectral weight pulse envelope regime, where DRAG is almost not needed and where the two state error fidelities are stable against pulse jitter. Explicit time evolution calculations are carried out in the lab frame for truncated multi-level Transmon qubit models obtained from a tight-binding model.
We determine the optimal quantum manipulation protocols for implementing high-fidelity, fast single-qubit gates. We demonstrate that the time-optimal pulse sequence is a ``bang-bang'' sequence: discrete pulses of either positive or negative maximum amplitude or zero. The non-adiabatic bang-bang pulse sequence minimizes gate duration providing a speedup for low-frequency architectures. We first derive the protocol for a transversally driven two-level system, extracting exact analytic expressions for minimum gate times. We then extend this framework to general multilevel architectures, identifying conditions that enable the coherent suppression of leakage errors. Using the fluxonium circuit as a representative case study, we optimize X/2 and Y/2 gates through a combination of discrete bang sequences and continuous waveform smoothing. This approach preserves near-optimal execution speeds while mitigating transitions outside the computational subspace. Open-system simulations demonstrate that these sequences outperform commensurate and resonant pulse schemes across different fluxonium regimes, achieving low-error manipulation significantly faster than standard resonant control, even in the presence of 1/f flux noise and dissipation.