Adiabatic or slowly varying gate operations are typically required in order to remain within the qubit subspace in an anharmonic oscillator. However significant speed ups are possible by using the two quadrature derivative-removal-by-adiabatic-gate(DRAG) technique, where a second time derivative pulse component burns a spectral hole near an unwanted transition. It is shown here, that simultaneous optimization of the detuning and the pulse norm in addition, further reduces leakage errors and significantly improve gate fidelities. However, with this optimization accounting for the AC Stark shift, there is a low spectral weight pulse envelope regime, where DRAG is almost not needed and where the two state error fidelities are stable against pulse jitter. Explicit time evolution calculations are carried out in the lab frame for truncated multi-level Transmon qubit models obtained from a tight-binding model.
Adiabatic or slowly varying gate operations are typically required in order to remain within the qubit subspace in an anharmonic oscillator. However significant speed ups are possible by using the two quadrature derivative-removal-by-adiabatic-gate(DRAG) technique, where a second time derivative pulse component burns a spectral hole near an unwanted transition. It is shown here, that simultaneous optimization of the detuning and the pulse norm in addition, further reduces leakage errors and significantly improve gate fidelities. However, with this optimization accounting for the AC Stark shift, there is a low spectral weight pulse envelope regime, where DRAG is almost not needed and where the two state error fidelities are stable against pulse jitter. Explicit time evolution calculations are carried out in the lab frame for truncated multi-level Transmon qubit models obtained from a tight-binding model.
Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024
One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below 2.0×10−5, and obtain fidelities above 99.98% for pulse durations down to 6.8 ns for both X and X/2 gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below 10−6. The presented approach can be readily applied to other qubit types as well.
High-fidelity control of superconducting qubits requires carefully shaped microwave pulses to avoid several different kinds of error at once. This article is a pedagogical bridging text aimed at upper-level undergraduate and early graduate students who have completed an introductory quantum mechanics course and a first course in quantum computing or quantum information, but who have not yet encountered the physical implementation of qubit gates. We integrate physical intuition for pulse design, analytical gate-level descriptions, and practical hardware considerations into a single, derivation-driven narrative, with explicit learning objectives. We begin with simple pulse envelopes and their spectral properties, showing how finite bandwidth produces leakage outside the computational subspace. This motivates the derivative removal by adiabatic gate (DRAG) technique, which we derive explicitly using the Magnus expansion, obtaining a clear, order-by-order account of which physical error channel appears at which order and why DRAG's cancellation is necessarily incomplete. We discuss the practical hardware realities of control pulse generation, focusing on arbitrary waveform generators (AWG), local oscillators (LO), and IQ mixing. Finally, we extend the discussion to two-qubit operation via the cross-resonance gate, and interpret how driving the control qubit at the target qubit's transition frequency necessarily produces several unwanted interaction terms alongside the desired one, and how successive generations of pulse-engineering strategies have been designed to suppress them.
In qubits made from a weakly anharmonic oscillator the leading source of error at short gate times is leakage of population out of the two dimensional Hilbert space that forms the qubit. In this article we develop a general scheme based on an adiabatic expansion to find pulse shapes that correct this type of error. We find a family of solutions that allows tailoring to what is practical to implement for a specific application. Our result contains and improves the previously developed derivative removal by adiabatic gate technique [F. Motzoi et al., Phys. Rev. Lett. 103, 110501 (2009)] and allows a generalization to other nonlinear oscillators with more than one leakage transition.
Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.
A fundamental challenge in quantum computing is to increase the number of operations within the qubit coherence time. While this can be achieved by decreasing the gate duration, the use of shorter signals increases their bandwidth and can cause leakage into energetically separated states. A common method to suppress leakage for short pulses is the Derivative Removal by Adiabatic Gate (DRAG) method, which, however, relies on IQ modulation of radio-frequency (RF) signals, thus cannot be applied to the baseband signals, e.g., for semiconductor spin qubits. This paper proposes a novel technique, Delayed Leakage Reduction (DLR), that suppresses leakage at targeted frequencies even for baseband control by using time-delayed repetitions of the control signal to enable rapid, high-fidelity operations. We apply DLR on the adiabatic CZ gate between two spin qubits and achieve fidelities exceeding 99.9% within 9.4 ns for a resonance frequency difference of only 100 MHz. Towards the experimental realization of the proposed control method, we also assess the impact on the fidelity of the sampling rate, noise, and signal quantization of the electronic hardware generating the control pulse, thus setting the minimum hardware requirements for any experimental demonstration.