Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2402.17757 · PRX Quantum

Reducing Leakage of Single-Qubit Gates for Superconducting Quantum Processors Using Analytical Control Pulse Envelopes

Eric Hyyppä, Antti P. Vepsäläinen, Miha Papič, Chun Fai Chan, Sinan Inel, Alessandro Landra, Wei Liu, Jürgen Luus, Fabian Marxer, Caspar F. Ockeloen-Korppi, Sebastian Orbell, Brian Tarasinski, Johannes Heinsoo

Published Sep 19, 2024• 85 citations
arXivHTMLPDF

Abstract

Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024

DOI
10.1103/prxquantum.5.030353

Related papers

Ultrafast Single Qubit Gates through Multi-Photon Transition Removal

Y. Gao, A. Galicia, J. D. Da Costa Jesus +12 more

One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below $2.0\times10^{-5}$, and obtain fidelities above $99.98\%$ for pulse durations down to 6.8 ns for both $X$ and $X/2$ gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below $10^{-6}$. The presented approach can be readily applied to other qubit types as well.

quant-pharXiv:2511.22365•Nature Communications•Nov 28, 2025•5 citations

Leakage reduction in fast superconducting qubit gates via optimal control

M. Werninghaus, D. J. Egger, F. Roy +3 more

Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.

arXiv:2003.05952•npj Quantum Information•Jan 29, 2021•217 citations

Closed-loop optimization for high-fidelity controlled- Z gates in superconducting qubits

N.J. Glaser, Federico Roy, Ivan Tsitsilin +13 more

Achieving fast and high-fidelity qubit operations is crucial for unlocking the potential of quantum computers. In particular, reaching low gate errors in two-qubit gates has been a long-standing challenge in the field of superconducting qubits due to their typically long duration relative to coherence times. To realize fast gates, we use the hybridization between fixed-frequency superconducting qubits with a strongly interacting coupler mode that is tunable in frequency. To reduce population leakage during required adiabatic passages through avoided level crossings, we employ a sensitivity-adaptive closed-loop optimization method to design complex pulse shapes. We compare the performance of Gaussian-square, Fourier-series, and piecewise-constant-slope pulse parametrizations and are able to reach 99.9% controlled- Z -gate fidelity using a 64-ns-long Fourier-series pulse defined by only seven parameters. These high-fidelity values are achieved by analyzing the optimized pulse shapes to identify and systematically mitigate signal-line distortions in the experiment. To improve the convergence speed of the optimization, we implement an adaptive cost function, which continuously maximizes the sensitivity. The demonstrated method can be used for tune-up and recalibration of superconducting quantum processors.

arXiv:2412.17454•Physical Review Applied•Jul 15, 2025•12 citations

Separate Control of Transient Leakage Exposure and Endpoint Leakage in Fast Transmon Gates

Haoran Yang, Fudong Liu, Weilong Wang +2 more

Leakage to noncomputational states limits the speed of single-qubit gates in weakly anharmonic transmons. Conventional pulse-shaping methods, including derivative removal by adiabatic gate (DRAG), primarily suppress the leakage remaining at the end of a gate. Here we demonstrate that endpoint leakage and the transient leakage population that accumulates during the gate represent distinct control objectives. Endpoint leakage is associated with the drive spectrum at the anharmonicity, whereas transient exposure depends on spectral weight over a finite frequency band and governs the additional leakage induced by dephasing. A spectral null at the leakage transition therefore suppresses the endpoint amplitude without necessarily reducing transient exposure. Based on this distinction, we introduce a path--endpoint separation pulse that combines transient-path shaping with a two-tone endpoint correction. For a $10$ ns $R_X(π/2)$ gate with an anharmonicity magnitude of $0.2$ GHz, numerical simulations show a $21\%$ reduction in transient exposure relative to cosine DRAG and a corresponding $20\%$ reduction in dephasing-induced excess leakage. The two correction tones further suppress residual leakage through the $|2\rangle$ and $|3\rangle$ channels, lowering the coherent endpoint leakage from approximately $7\times10^{-7}$ to $3\times10^{-8}$ without increasing transient exposure. These results establish transient exposure and endpoint leakage as complementary targets for the design of fast transmon gates.

quant-pharXiv:2607.05779•Jul 8, 2026•2 citations

Active Leakage Cancellation in Single Qubit Gates

B. Chiaro, Yaxing Zhang

The ability to perform fast and accurate rotations between the computational basis states of quantum bits is one of the most fundamental requirements for building a quantum computer. Because physical qubits generally contain more than two levels, faster gates often result in a higher leakage rate outside of the computational space. In this Letter, we enhance the state-of-the-art single qubit gate by introducing active leakage cancellation. This is accomplished via a second drive tone near the leakage transition such that we cancel the leakage caused by the main drive. Furthermore, we describe a measurement sequence that can be used to calibrate the parameters of this leakage cancellation drive. Finally, we apply the technique to superconducting transmon qubits and achieve leakage suppression by up to a factor of 20 when compared to pulses shaped with the standard derivative removal by adiabatic gate technique. This results in a coherence-limited gate infidelity of 7.5×10^{-5} with leakage below 10^{-5} level, for a 10 ns π/2 gate and 196 MHz qubit anharmonicity.

arXiv:2503.14731•Physical Review Letters•Aug 26, 2025•16 citations

Mitigating crosstalk errors for simultaneous single-qubit gates on a superconducting quantum processor

Jaap J. Wesdorp, Eric Hyyppä, Joona Andersson +61 more

Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.

quant-pharXiv:2603.11018•PRX Quantum•Mar 12, 2026•15 citations
Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024
One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below 2.0×10−52.0\times10^{-5}2.0×10−5, and obtain fidelities above 99.98%99.98\%99.98% for pulse durations down to 6.8 ns for both XXX and X/2X/2X/2 gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below 10−610^{-6}10−6. The presented approach can be readily applied to other qubit types as well.
Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.
Achieving fast and high-fidelity qubit operations is crucial for unlocking the potential of quantum computers. In particular, reaching low gate errors in two-qubit gates has been a long-standing challenge in the field of superconducting qubits due to their typically long duration relative to coherence times. To realize fast gates, we use the hybridization between fixed-frequency superconducting qubits with a strongly interacting coupler mode that is tunable in frequency. To reduce population leakage during required adiabatic passages through avoided level crossings, we employ a sensitivity-adaptive closed-loop optimization method to design complex pulse shapes. We compare the performance of Gaussian-square, Fourier-series, and piecewise-constant-slope pulse parametrizations and are able to reach 99.9% controlled- Z -gate fidelity using a 64-ns-long Fourier-series pulse defined by only seven parameters. These high-fidelity values are achieved by analyzing the optimized pulse shapes to identify and systematically mitigate signal-line distortions in the experiment. To improve the convergence speed of the optimization, we implement an adaptive cost function, which continuously maximizes the sensitivity. The demonstrated method can be used for tune-up and recalibration of superconducting quantum processors.
Leakage to noncomputational states limits the speed of single-qubit gates in weakly anharmonic transmons. Conventional pulse-shaping methods, including derivative removal by adiabatic gate (DRAG), primarily suppress the leakage remaining at the end of a gate. Here we demonstrate that endpoint leakage and the transient leakage population that accumulates during the gate represent distinct control objectives. Endpoint leakage is associated with the drive spectrum at the anharmonicity, whereas transient exposure depends on spectral weight over a finite frequency band and governs the additional leakage induced by dephasing. A spectral null at the leakage transition therefore suppresses the endpoint amplitude without necessarily reducing transient exposure. Based on this distinction, we introduce a path--endpoint separation pulse that combines transient-path shaping with a two-tone endpoint correction. For a 101010 ns RX(π/2)R_X(π/2)RX​(π/2) gate with an anharmonicity magnitude of 0.20.20.2 GHz, numerical simulations show a 21%21\%21% reduction in transient exposure relative to cosine DRAG and a corresponding 20%20\%20% reduction in dephasing-induced excess leakage. The two correction tones further suppress residual leakage through the ∣2⟩|2\rangle∣2⟩ and ∣3⟩|3\rangle∣3⟩ channels, lowering the coherent endpoint leakage from approximately 7×10−77\times10^{-7}7×10−7 to 3×10−83\times10^{-8}3×10−8 without increasing transient exposure. These results establish transient exposure and endpoint leakage as complementary targets for the design of fast transmon gates.
The ability to perform fast and accurate rotations between the computational basis states of quantum bits is one of the most fundamental requirements for building a quantum computer. Because physical qubits generally contain more than two levels, faster gates often result in a higher leakage rate outside of the computational space. In this Letter, we enhance the state-of-the-art single qubit gate by introducing active leakage cancellation. This is accomplished via a second drive tone near the leakage transition such that we cancel the leakage caused by the main drive. Furthermore, we describe a measurement sequence that can be used to calibrate the parameters of this leakage cancellation drive. Finally, we apply the technique to superconducting transmon qubits and achieve leakage suppression by up to a factor of 20 when compared to pulses shaped with the standard derivative removal by adiabatic gate technique. This results in a coherence-limited gate infidelity of 7.5×10^{-5} with leakage below 10^{-5} level, for a 10 ns π/2 gate and 196 MHz qubit anharmonicity.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.