Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2608.16702

Time-optimal quantum gates with bang-bang control in multilevel systems

Valentín Reparaz, Santiago Ferreyra, María José Sánchez, Daniel Domínguez, Leandro Tosi

quant-phcond-mat.mes-hallSubmitted Aug 17, 2026• Announced Aug 18, 2026• 0 citations
arXivHTMLPDF

Abstract

We determine the optimal quantum manipulation protocols for implementing high-fidelity, fast single-qubit gates. We demonstrate that the time-optimal pulse sequence is a ``bang-bang'' sequence: discrete pulses of either positive or negative maximum amplitude or zero. The non-adiabatic bang-bang pulse sequence minimizes gate duration providing a speedup for low-frequency architectures. We first derive the protocol for a transversally driven two-level system, extracting exact analytic expressions for minimum gate times. We then extend this framework to general multilevel architectures, identifying conditions that enable the coherent suppression of leakage errors. Using the fluxonium circuit as a representative case study, we optimize $X/2$ and $Y/2$ gates through a combination of discrete bang sequences and continuous waveform smoothing. This approach preserves near-optimal execution speeds while mitigating transitions outside the computational subspace. Open-system simulations demonstrate that these sequences outperform commensurate and resonant pulse schemes across different fluxonium regimes, achieving low-error manipulation significantly faster than standard resonant control, even in the presence of $1/f$ flux noise and dissipation.

Comments
18 pages, 5 figures

Related papers

Time-optimal single-scalar control on a qubit of unitary dynamics

Chungwei Lin, Qi Ding, Petros T. Boufounos +4 more

Optimal control theory is applied to analyze the time-optimal solution with a single scalar control knob in a two-level quantum system without quantum decoherence. Emphasis is placed on the dependence on the maximum control strength ${u}_{\text{max}}$. General constraints on the optimal protocol are derived and used to rigorously parametrize the time-optimal solution. Two concrete problems are investigated. For generic state preparation problems, both multiple bang-bang and bang-singular-bang are legitimate and should be considered. Generally, the optimal is bang-bang for small ${u}_{\text{max}}$, and there exists a state-dependent critical amplitude above which singular control emerges. For the X-gate operation of a qubit, the optimal protocol is exclusively multiple bang-bang. The minimum gate time is about 80% of that based on the resonant Rabi $\ensuremath{\pi}$-pulse over a wide range of control strength; in the ${u}_{\text{max}}\ensuremath{\rightarrow}0$ limit, this ratio is derived to be $\ensuremath{\pi}/4$. To develop practically feasible protocols, we present methods to smooth the abrupt changes in the bang-bang control while preserving perfect gate fidelity. The presence of bang-bang segments in the time-optimal protocol indicates that the high-frequency components and a full calculation (instead of the commonly adopted rotating wave approximation) are essential for the ultimate quantum speed limit.

arXiv:2504.01785•Physical Review A•Apr 2, 2025•2 citations

Optimizing LZSM protocol for high-fidelity gates in open-system fluxonium

Santiago Ferreyra, Valentın Reparaz, Maria Jose Sanchez +2 more

Quantum gates based on resonant Rabi oscillations are inherently slow for small-frequency qubits. They are also prone to errors due to counter-rotating terms. However, when the anharmonicity is sufficiently high, as in the fluxonium architecture, alternative manipulation protocols can outperform standard resonant driving. In this work, we implement fast, high-fidelity quantum gates based on a one-period Landau-Zener-Stückelberg-Majorana (LZSM) driving protocol. We derive analytical expressions that simplify the exploration of the parameter space while accounting for the multi-level structure of the circuit. Furthermore, we analyze the role of leakage, discussing strategies to mitigate it and identifying regimes in which it becomes the dominant source of error. Finally, to evaluate the impact of dissipation on gate fidelity, we develop a robust formalism suitable for analyzing the open-system performance of quantum gates in the strong driving regime.

quant-pharXiv:2607.07999•Physical review. B./Physical review. B•Jul 10, 2026•3 citations

High-speed control of a fluxonium qubit via picosecond pulses from Josephson digital circuits

M. V. Bastrakova, D. S. Pashin, V. A. Vozhakov +2 more

We develop a control strategy for fluxonium qubits based on picosecond single-flux-quantum (SFQ) pulses generated by Josephson digital circuits. A major challenge is that SFQ protocols originally designed for transmon control become inefficient for low-frequency fluxonium. In this regime, the asymmetry of flux and charge couplings leads either to excessive leakage or excessively long gate times. We show that this limitation can be overcome by two complementary protocols. The first protocol employs high-frequency SFQ pulse packets applied through the flux channel, offering a simple, analytically transparent, and robust approach for high-fidelity single-qubit control. The second protocol combines phase-shifted flux and charge pulse sequences to enhance the resonant drive and reduce the gate duration. Multilevel simulations demonstrate single-qubit gate fidelities above $99.99\%$; the simpler protocol remains robust under moderate variations of qubit parameters and flux bias, while the combined protocol preserves high fidelity while substantially accelerating the gate. These results establish SFQ-based cryogenic control as a realistic route to fast, accurate, and scalable manipulation of fluxonium qubits.

arXiv:2611.14358•Physical Review Applied•Nov 3, 2026•0 citations

Optimal robust single-qubit gates in superconducting quantum processors

Tangyou Huang, Anuj Aggarwal, Jingjun Zhu +11 more

Fault-tolerant quantum computing requires high-fidelity quantum gates that are resilient to control errors and device imperfections. Here, we develop energy-optimal control pulses for single-qubit gates that are simultaneously robust against frequency detuning and waveform inhomogeneities while also suppressing leakage outside the computational subspace. Combining the optimized pulse envelopes with an adaptive control scheme, we experimentally demonstrate optimal robust gates on a superconducting quantum processor. For a gate duration of 90ns, we achieve fidelities above 99.9% for the X gate and 99.6% for Hadamard-type gates. For the X gate, we maintain fidelities above 99.5% for simultaneous drive-amplitude variations up to 20% and qubit detuning up to 4 MHz. This robustness outperforms that of conventional Gaussian pulses by an order of magnitude, without much difference in peak gate fidelity. These results establish a route towards robust single-qubit control in large-scale quantum processors, advancing the development of fault-tolerant quantum computing.

quant-pharXiv:2610.24212•Oct 20, 2026•1 citation

Speed limits for two-qubit gates with weakly anharmonic qubits

Sahel Ashhab, Fumiki Yoshihara, Tomoko Fuse +3 more

We consider the implementation of two-qubit gates when the physical systems used to realize the qubits possess additional quantum states in the accessible energy range. We use optimal control theory to determine the maximum achievable gate speed for two-qubit gates in the qubit subspace of the many-level Hilbert space, and we analyze the effect of the additional quantum states on the gate speed. We identify two competing mechanisms. On one hand, higher energy levels are generally more strongly coupled to each other. Under suitable conditions, this stronger coupling can be utilized to make two-qubit gates significantly faster than the reference value based on simple qubits. On the other hand, a weak anharmonicity constrains the speed at which the system can be adequately controlled: according to the intuitive picture, faster operations require stronger control fields, which are more likely to excite higher levels in a weakly anharmonic system, which in turn leads to faster decoherence and uncontrolled leakage outside the qubit space. To account for this constraint, we modify the pulse optimization algorithm to avoid pulses that lead to appreciable population of the higher levels. In this case, we find that the presence of the higher levels can lead to a significant reduction in the maximum achievable gate speed. We also compare the optimal-control gate speeds with those obtained using the cross-resonance or selective-darkening gate protocol. We find that this protocol, with some parameter optimization, can be used to achieve a relatively fast implementation of the controlled-NOT gate. These results can help the search for optimized gate implementations in realistic quantum computing architectures, such as those based on superconducting circuits. They also provide guidelines for desirable conditions on anharmonicity that would allow optimal utilization of the higher levels to achieve fast quantum gates.

arXiv:2109.01469•Physical Review A•Apr 25, 2022•16 citations

Optimal control for fast and high-fidelity quantum gates in coupled superconducting flux qubits

Shang‐Yu Huang, Hsi‐Sheng Goan

We apply the quantum optimal control theory based on the Krotov method to implement single-qubit $X$ and $Z$ gates and two-qubit cnot gates for inductively coupled superconducting flux qubits with fixed qubit transition frequencies and fixed off-diagonal qubit-qubit coupling. Our scheme shares an advantage with other direct-coupling schemes in that it requires no additional coupler subcircuit and control lines. The control lines needed are only for the manipulation of individual qubits (e.g., a time-dependent magnetic flux or field applied on each qubit). The qubits are operated at the optimal coherence points and the gate operation times (less than 1 ns for single-qubit gates and $\ensuremath{\sim}2$ ns for cnotgates) are much shorter than the corresponding qubit decoherence time. A cnot gate or other general quantum gates can be implemented in a single run of the pulse sequence rather than being decomposed into several single-qubit and several entangled two-qubit operations in series by composite pulse sequences. Quantum gates constructed via our scheme are all with very high fidelity (very low error) as our optimal control scheme takes into account the fixed qubit detuning and fixed two-qubit interaction as well as all other time-dependent magnetic-field-induced single-qubit interactions and two-qubit couplings. The effect of leakage to higher-energy-level states and the effect of qubit decoherence on the quantum-gate operations are also discussed.

arXiv:1406.7707•Physical Review A•Jul 14, 2014•35 citations
We determine the optimal quantum manipulation protocols for implementing high-fidelity, fast single-qubit gates. We demonstrate that the time-optimal pulse sequence is a ``bang-bang'' sequence: discrete pulses of either positive or negative maximum amplitude or zero. The non-adiabatic bang-bang pulse sequence minimizes gate duration providing a speedup for low-frequency architectures. We first derive the protocol for a transversally driven two-level system, extracting exact analytic expressions for minimum gate times. We then extend this framework to general multilevel architectures, identifying conditions that enable the coherent suppression of leakage errors. Using the fluxonium circuit as a representative case study, we optimize X/2X/2X/2 and Y/2Y/2Y/2 gates through a combination of discrete bang sequences and continuous waveform smoothing. This approach preserves near-optimal execution speeds while mitigating transitions outside the computational subspace. Open-system simulations demonstrate that these sequences outperform commensurate and resonant pulse schemes across different fluxonium regimes, achieving low-error manipulation significantly faster than standard resonant control, even in the presence of 1/f1/f1/f flux noise and dissipation.
Optimal control theory is applied to analyze the time-optimal solution with a single scalar control knob in a two-level quantum system without quantum decoherence. Emphasis is placed on the dependence on the maximum control strength umax{u}_{\text{max}}umax​. General constraints on the optimal protocol are derived and used to rigorously parametrize the time-optimal solution. Two concrete problems are investigated. For generic state preparation problems, both multiple bang-bang and bang-singular-bang are legitimate and should be considered. Generally, the optimal is bang-bang for small umax{u}_{\text{max}}umax​, and there exists a state-dependent critical amplitude above which singular control emerges. For the X-gate operation of a qubit, the optimal protocol is exclusively multiple bang-bang. The minimum gate time is about 80% of that based on the resonant Rabi $\ensuremath{\pi}$-pulse over a wide range of control strength; in the ${u}_{\text{max}}\ensuremath{\rightarrow}0$ limit, this ratio is derived to be $\ensuremath{\pi}/4$. To develop practically feasible protocols, we present methods to smooth the abrupt changes in the bang-bang control while preserving perfect gate fidelity. The presence of bang-bang segments in the time-optimal protocol indicates that the high-frequency components and a full calculation (instead of the commonly adopted rotating wave approximation) are essential for the ultimate quantum speed limit.
Quantum gates based on resonant Rabi oscillations are inherently slow for small-frequency qubits. They are also prone to errors due to counter-rotating terms. However, when the anharmonicity is sufficiently high, as in the fluxonium architecture, alternative manipulation protocols can outperform standard resonant driving. In this work, we implement fast, high-fidelity quantum gates based on a one-period Landau-Zener-Stückelberg-Majorana (LZSM) driving protocol. We derive analytical expressions that simplify the exploration of the parameter space while accounting for the multi-level structure of the circuit. Furthermore, we analyze the role of leakage, discussing strategies to mitigate it and identifying regimes in which it becomes the dominant source of error. Finally, to evaluate the impact of dissipation on gate fidelity, we develop a robust formalism suitable for analyzing the open-system performance of quantum gates in the strong driving regime.
We develop a control strategy for fluxonium qubits based on picosecond single-flux-quantum (SFQ) pulses generated by Josephson digital circuits. A major challenge is that SFQ protocols originally designed for transmon control become inefficient for low-frequency fluxonium. In this regime, the asymmetry of flux and charge couplings leads either to excessive leakage or excessively long gate times. We show that this limitation can be overcome by two complementary protocols. The first protocol employs high-frequency SFQ pulse packets applied through the flux channel, offering a simple, analytically transparent, and robust approach for high-fidelity single-qubit control. The second protocol combines phase-shifted flux and charge pulse sequences to enhance the resonant drive and reduce the gate duration. Multilevel simulations demonstrate single-qubit gate fidelities above 99.99%99.99\%99.99%; the simpler protocol remains robust under moderate variations of qubit parameters and flux bias, while the combined protocol preserves high fidelity while substantially accelerating the gate. These results establish SFQ-based cryogenic control as a realistic route to fast, accurate, and scalable manipulation of fluxonium qubits.
Fault-tolerant quantum computing requires high-fidelity quantum gates that are resilient to control errors and device imperfections. Here, we develop energy-optimal control pulses for single-qubit gates that are simultaneously robust against frequency detuning and waveform inhomogeneities while also suppressing leakage outside the computational subspace. Combining the optimized pulse envelopes with an adaptive control scheme, we experimentally demonstrate optimal robust gates on a superconducting quantum processor. For a gate duration of 90ns, we achieve fidelities above 99.9% for the X gate and 99.6% for Hadamard-type gates. For the X gate, we maintain fidelities above 99.5% for simultaneous drive-amplitude variations up to 20% and qubit detuning up to 4 MHz. This robustness outperforms that of conventional Gaussian pulses by an order of magnitude, without much difference in peak gate fidelity. These results establish a route towards robust single-qubit control in large-scale quantum processors, advancing the development of fault-tolerant quantum computing.
We consider the implementation of two-qubit gates when the physical systems used to realize the qubits possess additional quantum states in the accessible energy range. We use optimal control theory to determine the maximum achievable gate speed for two-qubit gates in the qubit subspace of the many-level Hilbert space, and we analyze the effect of the additional quantum states on the gate speed. We identify two competing mechanisms. On one hand, higher energy levels are generally more strongly coupled to each other. Under suitable conditions, this stronger coupling can be utilized to make two-qubit gates significantly faster than the reference value based on simple qubits. On the other hand, a weak anharmonicity constrains the speed at which the system can be adequately controlled: according to the intuitive picture, faster operations require stronger control fields, which are more likely to excite higher levels in a weakly anharmonic system, which in turn leads to faster decoherence and uncontrolled leakage outside the qubit space. To account for this constraint, we modify the pulse optimization algorithm to avoid pulses that lead to appreciable population of the higher levels. In this case, we find that the presence of the higher levels can lead to a significant reduction in the maximum achievable gate speed. We also compare the optimal-control gate speeds with those obtained using the cross-resonance or selective-darkening gate protocol. We find that this protocol, with some parameter optimization, can be used to achieve a relatively fast implementation of the controlled-NOT gate. These results can help the search for optimized gate implementations in realistic quantum computing architectures, such as those based on superconducting circuits. They also provide guidelines for desirable conditions on anharmonicity that would allow optimal utilization of the higher levels to achieve fast quantum gates.
We apply the quantum optimal control theory based on the Krotov method to implement single-qubit XXX and ZZZ gates and two-qubit cnot gates for inductively coupled superconducting flux qubits with fixed qubit transition frequencies and fixed off-diagonal qubit-qubit coupling. Our scheme shares an advantage with other direct-coupling schemes in that it requires no additional coupler subcircuit and control lines. The control lines needed are only for the manipulation of individual qubits (e.g., a time-dependent magnetic flux or field applied on each qubit). The qubits are operated at the optimal coherence points and the gate operation times (less than 1 ns for single-qubit gates and $\ensuremath{\sim}2$ ns for cnotgates) are much shorter than the corresponding qubit decoherence time. A cnot gate or other general quantum gates can be implemented in a single run of the pulse sequence rather than being decomposed into several single-qubit and several entangled two-qubit operations in series by composite pulse sequences. Quantum gates constructed via our scheme are all with very high fidelity (very low error) as our optimal control scheme takes into account the fixed qubit detuning and fixed two-qubit interaction as well as all other time-dependent magnetic-field-induced single-qubit interactions and two-qubit couplings. The effect of leakage to higher-energy-level states and the effect of qubit decoherence on the quantum-gate operations are also discussed.