Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.24230

A material-agnostic platform to probe spin-phonon interactions using high-overtone bulk acoustic wave resonators

Q. Greffe, A. Hugot, S. Zhang, J. Jarreau, L. Del-Rey, E. Bonet, F. Balestro, T. Chanelière, J. J. Viennot

cond-mat.mes-hallcond-mat.mtrl-sciquant-phSubmitted Mar 25, 2026• Announced Mar 26, 2026• Revised Mar 27, 2026 (v2)
v1 · Mar 25, 2026v2 · Mar 27, 2026
arXivHTMLPDF

Abstract

Spin-phonon interactions have a dual role in emerging spin-based quantum technologies. While they can be a limitation to device performance through decoherence, they also serve as a critical resource for coherent spin control, detection, and the realization of spin-based quantum networks. However, their direct characterization remains a challenge and is usually material-dependent. Here, we introduce a technique to probe spin-phonon coupling at millikelvin temperatures and gigahertz frequencies, using high-overtone bulk acoustic wave resonators (HBARs) integrated with arbitrary crystals via visco-elastic transfer of thin-film lithium niobate transducers. By tuning the Larmor frequency of dilute spin ensembles into resonance with HBAR modes, we extract the anisotropy and strength of spin-phonon interactions from acoustic dispersion and dissipation measurements. We demonstrate this approach in calcium tungstate (CaWO4) and yttrium orthosilicate (Y2SiO5), achieving cooperativities up to 0.5 for erbium dopant ensembles. Our method enables the study of spin-phonon interactions in complex crystalline materials, with minimal fabrication constraints. These results will facilitate the design of hybrid quantum systems and the quest for ion-matrix combination with enhanced spin-phonon coupling.

Comments
21 pages, typos corrected

Related papers

Millisecond coherence times in gigahertz-frequency mechanical oscillators

Yizhi Luo, Hilel Hagai Diamandi, Hanshi Li +9 more

High-frequency mechanical oscillators with long coherence times are essential for realizing a variety of high-fidelity quantum sensors, transducers and memories. However, the coherence times needed for quantum applications require advances in probing and mitigating the origins of phonon decoherence in the materials used for mechanical oscillators. Here we identify key sources of phonon decoherence in crystalline media by combining non-invasive laser spectroscopy with materials analysis. Using micro-fabricated high-overtone bulk acoustic-wave resonators as an experimental test bed, we find that phonon–surface interactions are the dominant source of phonon decoherence in crystalline quartz. The probable causes are lattice distortion, subsurface damage and a high concentration of elemental impurities. We use an optimized polishing process to remove the compromised surface layer and produce resonators with quality factors exceeding 240 million at 12 GHz, corresponding to phonon coherence times of over 6 ms. We verify that these mechanical oscillators have negligible dephasing. Building on these results, we propose a path that could reach coherence times beyond 100 ms as the basis for high-frequency quantum memories. These findings demonstrate that enhanced control over surfaces enables a substantial reduction in dissipation and noise. Phonon decoherence in quantum high-overtone bulk acoustic-wave resonators is dominated by imperfections under the material surface. Removing the damaged subsurface layer substantially increases the performance of these devices.

arXiv:2504.07523•Nature Physics•Jul 9, 2026•13 citations

Epitaxial bulk acoustic wave resonators as highly coherent multi-phonon sources for quantum acoustodynamics

Vikrant Jayant Gokhale, Brian P. Downey, D. Scott Katzer +4 more

Abstract Solid-state quantum acoustodynamic (QAD) systems provide a compact platform for quantum information storage and processing by coupling acoustic phonon sources with superconducting or spin qubits. The multi-mode composite high-overtone bulk acoustic wave resonator (HBAR) is a popular phonon source well suited for QAD. However, scattering from defects, grain boundaries, and interfacial/surface roughness in the composite transducer severely limits the phonon relaxation time in sputter-deposited devices. Here, we grow an epitaxial-HBAR, consisting of a metallic NbN bottom electrode and a piezoelectric GaN film on a SiC substrate. The acoustic impedance-matched epi-HBAR has a power injection efficiency >99% from transducer to phonon cavity. The smooth interfaces and low defect density reduce phonon losses, yielding (f × Q) and phonon lifetimes up to 1.36 × 1017 Hz and 500 µs respectively. The GaN/NbN/SiC epi-HBAR is an electrically actuated, multi-mode phonon source that can be directly interfaced with NbN-based superconducting qubits or SiC-based spin qubits.

arXiv:2003.11097•Nature Communications•May 8, 2020•98 citations

Dissipative acousto-mechanical parametric interface between high-overtone acoustics and flexural phonons

Xun Ji, Huanying Sun, Longhao Wu +4 more

High-overtone bulk acoustic wave resonators (HBARs) promise advanced phononics, yet achieving nonlinearity remains challenging. We demonstrate a radiation-pressure-type parametric interaction between GHz HBARs and low-frequency flexural modes in a suspended silicon nitride membrane, where mechanical displacement modulates the external dissipation rate to enable dissipative acousto-mechanical coupling. Benefiting from the high quality factor, the system enters the resolved-sideband regime at room temperature, yielding acousto-mechanically induced transparency. We observe tunable Kerr nonlinearity and generate coherent HBAR frequency combs via two-tone driving. Notably, our dissipative coupling strength is 20 times larger than the dispersive coupling, the highest ratio among reported hybrid dissipative-dispersive coupling systems, resulting in the experimental observation of amplification in the reflection spectra under red-sideband driving. The ability to interface dense HBAR modes with a common mechanical resonator provides a scalable on-chip platform for multimode phononic information processing, with quantum phononics potentially achievable at sub-Kelvin temperatures.

quant-pharXiv:2605.24581•May 26, 2026

Interfacing planar superconducting qubits with high overtone bulk acoustic phonons

Mikael Kervinen, Ilkka Rissanen, Mika A. Sillanpää

Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.

arXiv:1802.06642•Physical review. B./Physical review. B•May 29, 2018•46 citations

Coupling high-overtone bulk acoustic wave resonators via superconducting qubits

Wayne Crump, Alpo Välimaa, Mika A. Sillanpää

In this work, we present a device consisting of two coupled transmon qubits, each of which are coupled to an independent high-overtone bulk acoustic wave resonator (HBAR). Both HBAR resonators support a plethora of acoustic modes, which can couple to the qubit near resonantly. We first show qubit–qubit interaction in the multimode system and, finally, quantum state transfer where an excitation is swapped from an HBAR mode of one qubit to an HBAR mode of the other qubit.

arXiv:2307.05544•Applied Physics Letters•Sep 25, 2023•10 citations

Loss Mechanisms in High-coherence Multimode Mechanical Resonators Coupled to Superconducting Circuits

Raquel Garcia Belles, Alexander Anferov, Lukas F. Deeg +14 more

Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 $μ$s and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of $C_{T_2}=1.1\times10^5$. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.

quant-pharXiv:2602.22117•PRX Quantum•Feb 26, 2026•8 citations
Spin-phonon interactions have a dual role in emerging spin-based quantum technologies. While they can be a limitation to device performance through decoherence, they also serve as a critical resource for coherent spin control, detection, and the realization of spin-based quantum networks. However, their direct characterization remains a challenge and is usually material-dependent. Here, we introduce a technique to probe spin-phonon coupling at millikelvin temperatures and gigahertz frequencies, using high-overtone bulk acoustic wave resonators (HBARs) integrated with arbitrary crystals via visco-elastic transfer of thin-film lithium niobate transducers. By tuning the Larmor frequency of dilute spin ensembles into resonance with HBAR modes, we extract the anisotropy and strength of spin-phonon interactions from acoustic dispersion and dissipation measurements. We demonstrate this approach in calcium tungstate (CaWO4) and yttrium orthosilicate (Y2SiO5), achieving cooperativities up to 0.5 for erbium dopant ensembles. Our method enables the study of spin-phonon interactions in complex crystalline materials, with minimal fabrication constraints. These results will facilitate the design of hybrid quantum systems and the quest for ion-matrix combination with enhanced spin-phonon coupling.
High-frequency mechanical oscillators with long coherence times are essential for realizing a variety of high-fidelity quantum sensors, transducers and memories. However, the coherence times needed for quantum applications require advances in probing and mitigating the origins of phonon decoherence in the materials used for mechanical oscillators. Here we identify key sources of phonon decoherence in crystalline media by combining non-invasive laser spectroscopy with materials analysis. Using micro-fabricated high-overtone bulk acoustic-wave resonators as an experimental test bed, we find that phonon–surface interactions are the dominant source of phonon decoherence in crystalline quartz. The probable causes are lattice distortion, subsurface damage and a high concentration of elemental impurities. We use an optimized polishing process to remove the compromised surface layer and produce resonators with quality factors exceeding 240 million at 12 GHz, corresponding to phonon coherence times of over 6 ms. We verify that these mechanical oscillators have negligible dephasing. Building on these results, we propose a path that could reach coherence times beyond 100 ms as the basis for high-frequency quantum memories. These findings demonstrate that enhanced control over surfaces enables a substantial reduction in dissipation and noise. Phonon decoherence in quantum high-overtone bulk acoustic-wave resonators is dominated by imperfections under the material surface. Removing the damaged subsurface layer substantially increases the performance of these devices.
Abstract Solid-state quantum acoustodynamic (QAD) systems provide a compact platform for quantum information storage and processing by coupling acoustic phonon sources with superconducting or spin qubits. The multi-mode composite high-overtone bulk acoustic wave resonator (HBAR) is a popular phonon source well suited for QAD. However, scattering from defects, grain boundaries, and interfacial/surface roughness in the composite transducer severely limits the phonon relaxation time in sputter-deposited devices. Here, we grow an epitaxial-HBAR, consisting of a metallic NbN bottom electrode and a piezoelectric GaN film on a SiC substrate. The acoustic impedance-matched epi-HBAR has a power injection efficiency >99% from transducer to phonon cavity. The smooth interfaces and low defect density reduce phonon losses, yielding (f × Q) and phonon lifetimes up to 1.36 × 1017 Hz and 500 µs respectively. The GaN/NbN/SiC epi-HBAR is an electrically actuated, multi-mode phonon source that can be directly interfaced with NbN-based superconducting qubits or SiC-based spin qubits.
High-overtone bulk acoustic wave resonators (HBARs) promise advanced phononics, yet achieving nonlinearity remains challenging. We demonstrate a radiation-pressure-type parametric interaction between GHz HBARs and low-frequency flexural modes in a suspended silicon nitride membrane, where mechanical displacement modulates the external dissipation rate to enable dissipative acousto-mechanical coupling. Benefiting from the high quality factor, the system enters the resolved-sideband regime at room temperature, yielding acousto-mechanically induced transparency. We observe tunable Kerr nonlinearity and generate coherent HBAR frequency combs via two-tone driving. Notably, our dissipative coupling strength is 20 times larger than the dispersive coupling, the highest ratio among reported hybrid dissipative-dispersive coupling systems, resulting in the experimental observation of amplification in the reflection spectra under red-sideband driving. The ability to interface dense HBAR modes with a common mechanical resonator provides a scalable on-chip platform for multimode phononic information processing, with quantum phononics potentially achievable at sub-Kelvin temperatures.
Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 μμμs and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2=1.1×105C_{T_2}=1.1\times10^5CT2​​=1.1×105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.