Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2504.07523 · Nature Physics

Millisecond coherence times in gigahertz-frequency mechanical oscillators

Yizhi Luo, Hilel Hagai Diamandi, Hanshi Li, R. Bi, David Mason, Taekwan Yoon, Xinghan Guo, H. Tang, Ryan O. Behunin, F. J. Walker, Charles Ahn, Peter T. Rakich

Published Jul 9, 2026• 13 citations
arXivHTMLPDF

Abstract

High-frequency mechanical oscillators with long coherence times are essential for realizing a variety of high-fidelity quantum sensors, transducers and memories. However, the coherence times needed for quantum applications require advances in probing and mitigating the origins of phonon decoherence in the materials used for mechanical oscillators. Here we identify key sources of phonon decoherence in crystalline media by combining non-invasive laser spectroscopy with materials analysis. Using micro-fabricated high-overtone bulk acoustic-wave resonators as an experimental test bed, we find that phonon–surface interactions are the dominant source of phonon decoherence in crystalline quartz. The probable causes are lattice distortion, subsurface damage and a high concentration of elemental impurities. We use an optimized polishing process to remove the compromised surface layer and produce resonators with quality factors exceeding 240 million at 12 GHz, corresponding to phonon coherence times of over 6 ms. We verify that these mechanical oscillators have negligible dephasing. Building on these results, we propose a path that could reach coherence times beyond 100 ms as the basis for high-frequency quantum memories. These findings demonstrate that enhanced control over surfaces enables a substantial reduction in dissipation and noise. Phonon decoherence in quantum high-overtone bulk acoustic-wave resonators is dominated by imperfections under the material surface. Removing the damaged subsurface layer substantially increases the performance of these devices.

DOI
10.1038/s41567-026-03314-3

Related papers

Phonon decoherence produced by two-level tunneling states

Ryan O. Behunin, Taylor Ray, Dylan Chapman +3 more

Phonon modes within pristine crystalline resonators now routinely reach the quantum ground state. Such systems are attractive for quantum information science applications, as advanced fabrication and processing can enable relatively long quantum coherence times, and precision control can be realized through optical, electrical, or qubit coupling. In many state-of-the-art systems, the phonon lifetime is limited by disorder. In particular, native oxides or damaged `dead layers' at surfaces can host two-level tunneling states that lead to a particularly problematic form of dissipation that increases at lower temperatures. As mechanical losses are driven down in systems such as micro-fabricated bulk acoustic wave resonators, tunneling states are expected to emerge as the dominant mechanism for phonon decoherence. A quantitative description of these mesoscopic systems therefore requires a framework that captures interactions between a selected phonon mode and a large ensemble of TLS. Here, we derive a quantum master equation for this coupled system, permitting the phonon decoherence produced by two-level tunneling states to be calculated. As an example, we estimate the lifetime of a variety of quantum states within quartz micro-resonators hosting a thin surface layer of tunneling states. We find that the phonon coherence time is maximized at low temperatures, in spite of increased mechanical dissipation, and that phonon-TLS coupling can be reduced for modes with strain nodes at the surfaces.

cond-mat.mes-hallCross-listedarXiv:2602.21388•Physical Review Applied•Feb 26, 2026•0 citations

Loss Mechanisms in High-coherence Multimode Mechanical Resonators Coupled to Superconducting Circuits

Raquel Garcia Belles, Alexander Anferov, Lukas F. Deeg +14 more

Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 $μ$s and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of $C_{T_2}=1.1\times10^5$. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.

quant-pharXiv:2602.22117•PRX Quantum•Feb 26, 2026•8 citations

Millisecond phonon lifetimes in piezoelectric nanomechanical resonators

Oliver A. Hitchcock, Matthew P. Maksymowych, Kaveh Pezeshki +5 more

Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding $4\times10^8$ ($f\cdot Q_i > 10^{18}$) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.

cond-mat.mes-hallCross-listedarXiv:2610.10700•Oct 9, 2026

Extremely high Q-factor mechanical modes in quartz bulk acoustic wave resonators at millikelvin temperature

Maxim Goryachev, Daniel Lloyd Creedon, Eugene N. Ivanov +3 more

We demonstrate that Bulk Acoustic Wave (BAW) quartz resonator cooled down to millikelvin temperatures are excellent building blocks for hybrid quantum systems with extremely long coherence times. Two overtones of the longitudinal mode at frequencies of 15.6 and 65.4 MHz demonstrate a maximum f.Q product of 7.8×1016 Hz. With this result, the Q-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained in other mechanical systems. Tested quartz resonators possess the ultra low acoustic losses crucial for electromagnetic cooling to the phonon ground state.

AIP conference proceedings•Jan 1, 2014•2 citations

Interfacing planar superconducting qubits with high overtone bulk acoustic phonons

Mikael Kervinen, Ilkka Rissanen, Mika A. Sillanpää

Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.

arXiv:1802.06642•Physical review. B./Physical review. B•May 29, 2018•46 citations

A material-agnostic platform to probe spin-phonon interactions using high-overtone bulk acoustic wave resonators

Q. Greffe, A. Hugot, S. Zhang +6 more

Spin-phonon interactions have a dual role in emerging spin-based quantum technologies. While they can be a limitation to device performance through decoherence, they also serve as a critical resource for coherent spin control, detection, and the realization of spin-based quantum networks. However, their direct characterization remains a challenge and is usually material-dependent. Here, we introduce a technique to probe spin-phonon coupling at millikelvin temperatures and gigahertz frequencies, using high-overtone bulk acoustic wave resonators (HBARs) integrated with arbitrary crystals via visco-elastic transfer of thin-film lithium niobate transducers. By tuning the Larmor frequency of dilute spin ensembles into resonance with HBAR modes, we extract the anisotropy and strength of spin-phonon interactions from acoustic dispersion and dissipation measurements. We demonstrate this approach in calcium tungstate (CaWO4) and yttrium orthosilicate (Y2SiO5), achieving cooperativities up to 0.5 for erbium dopant ensembles. Our method enables the study of spin-phonon interactions in complex crystalline materials, with minimal fabrication constraints. These results will facilitate the design of hybrid quantum systems and the quest for ion-matrix combination with enhanced spin-phonon coupling.

cond-mat.mes-hallCross-listedarXiv:2603.24230•Mar 26, 2026
High-frequency mechanical oscillators with long coherence times are essential for realizing a variety of high-fidelity quantum sensors, transducers and memories. However, the coherence times needed for quantum applications require advances in probing and mitigating the origins of phonon decoherence in the materials used for mechanical oscillators. Here we identify key sources of phonon decoherence in crystalline media by combining non-invasive laser spectroscopy with materials analysis. Using micro-fabricated high-overtone bulk acoustic-wave resonators as an experimental test bed, we find that phonon–surface interactions are the dominant source of phonon decoherence in crystalline quartz. The probable causes are lattice distortion, subsurface damage and a high concentration of elemental impurities. We use an optimized polishing process to remove the compromised surface layer and produce resonators with quality factors exceeding 240 million at 12 GHz, corresponding to phonon coherence times of over 6 ms. We verify that these mechanical oscillators have negligible dephasing. Building on these results, we propose a path that could reach coherence times beyond 100 ms as the basis for high-frequency quantum memories. These findings demonstrate that enhanced control over surfaces enables a substantial reduction in dissipation and noise. Phonon decoherence in quantum high-overtone bulk acoustic-wave resonators is dominated by imperfections under the material surface. Removing the damaged subsurface layer substantially increases the performance of these devices.
Phonon modes within pristine crystalline resonators now routinely reach the quantum ground state. Such systems are attractive for quantum information science applications, as advanced fabrication and processing can enable relatively long quantum coherence times, and precision control can be realized through optical, electrical, or qubit coupling. In many state-of-the-art systems, the phonon lifetime is limited by disorder. In particular, native oxides or damaged `dead layers' at surfaces can host two-level tunneling states that lead to a particularly problematic form of dissipation that increases at lower temperatures. As mechanical losses are driven down in systems such as micro-fabricated bulk acoustic wave resonators, tunneling states are expected to emerge as the dominant mechanism for phonon decoherence. A quantitative description of these mesoscopic systems therefore requires a framework that captures interactions between a selected phonon mode and a large ensemble of TLS. Here, we derive a quantum master equation for this coupled system, permitting the phonon decoherence produced by two-level tunneling states to be calculated. As an example, we estimate the lifetime of a variety of quantum states within quartz micro-resonators hosting a thin surface layer of tunneling states. We find that the phonon coherence time is maximized at low temperatures, in spite of increased mechanical dissipation, and that phonon-TLS coupling can be reduced for modes with strain nodes at the surfaces.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 μμμs and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2=1.1×105C_{T_2}=1.1\times10^5CT2​​=1.1×105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.
Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding 4×1084\times10^84×108 (f⋅Qi>1018f\cdot Q_i > 10^{18}f⋅Qi​>1018) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.
We demonstrate that Bulk Acoustic Wave (BAW) quartz resonator cooled down to millikelvin temperatures are excellent building blocks for hybrid quantum systems with extremely long coherence times. Two overtones of the longitudinal mode at frequencies of 15.6 and 65.4 MHz demonstrate a maximum f.Q product of 7.8×1016 Hz. With this result, the Q-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained in other mechanical systems. Tested quartz resonators possess the ultra low acoustic losses crucial for electromagnetic cooling to the phonon ground state.
Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.
Spin-phonon interactions have a dual role in emerging spin-based quantum technologies. While they can be a limitation to device performance through decoherence, they also serve as a critical resource for coherent spin control, detection, and the realization of spin-based quantum networks. However, their direct characterization remains a challenge and is usually material-dependent. Here, we introduce a technique to probe spin-phonon coupling at millikelvin temperatures and gigahertz frequencies, using high-overtone bulk acoustic wave resonators (HBARs) integrated with arbitrary crystals via visco-elastic transfer of thin-film lithium niobate transducers. By tuning the Larmor frequency of dilute spin ensembles into resonance with HBAR modes, we extract the anisotropy and strength of spin-phonon interactions from acoustic dispersion and dissipation measurements. We demonstrate this approach in calcium tungstate (CaWO4) and yttrium orthosilicate (Y2SiO5), achieving cooperativities up to 0.5 for erbium dopant ensembles. Our method enables the study of spin-phonon interactions in complex crystalline materials, with minimal fabrication constraints. These results will facilitate the design of hybrid quantum systems and the quest for ion-matrix combination with enhanced spin-phonon coupling.