Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2307.05544 · Applied Physics Letters

Coupling high-overtone bulk acoustic wave resonators via superconducting qubits

Wayne Crump, Alpo Välimaa, Mika A. Sillanpää

Published Sep 25, 2023• 10 citations
arXivHTMLPDF

Abstract

In this work, we present a device consisting of two coupled transmon qubits, each of which are coupled to an independent high-overtone bulk acoustic wave resonator (HBAR). Both HBAR resonators support a plethora of acoustic modes, which can couple to the qubit near resonantly. We first show qubit–qubit interaction in the multimode system and, finally, quantum state transfer where an excitation is swapped from an HBAR mode of one qubit to an HBAR mode of the other qubit.

DOI
10.1063/5.0166924

Related papers

High-overtone bulk acoustic-wave resonators as a platform for microwave-to-optical quantum state transfer

Tom Schatteburg

As superconducting quantum computing devices grow more and more powerful [1–3], the quest to connect them over large-scale distances [4] becomes increasingly relevant. Microwave-to-optical transducers offer a pathway for such connections via a low-loss and thermal noise-free optical fiber network. However, achieving simultaneously high efficiency and low added noise is currently limited by a trade-off between both quantities due to pump absorption heating [5–9]. High-overtone bulk acoustic-wave resonators (HBARs) promise a solution to this problem due to their crystalline material and low surface-to-bulk ratio. In this thesis, we introduce an HBAR-based microwave-to-optical transducer to achieve quantum state transfer. As a first milestone, we build a Brillouin-optomechanical cavity that self-aligns when cooled down and is relatively insensitive to vibrations, which allows optomechanical coupling in an environment that is compatible with superconducting circuits. We measure the phonon mode occupation of the HBAR to be below 0.5, demonstrating the heaviest mechanical object measured in the quantum ground state to date. In addition, we show that the mode occupations are insensitive to laser pump power, indicating negligible absorption heating and confirming the unique advantage of this system. We then build a transducer device which combines Brillouin-optomechanical coupling and piezo-electromechanical coupling to a superconducting qubit in one geometry. We can align the optical cavity mode to pass through the ring-shaped antenna of the superconducting qubit without affecting the optical finesse. This allows us to measure optomechanical coupling in this device as a next milestone towards high-efficiency, low noise microwave-to-optical transduction.

•Jan 1, 2025•0 citations

Collective Dynamics in Circuit Quantum Acoustodynamics with a Macroscopic Resonator

Libo Zhang, Chilong Liu, Guixu Xie +9 more

Collective dynamics in engineered quantum systems offer a unique and versatile platform for exploring how many-body correlations bridge microscopic entanglement and macroscopic behavior. In this work, we report collective Dicke dynamics of acoustic modes in a macroscopic high-overtone bulk acoustic resonator (HBAR). To achieve this, we engineer a hybrid quantum acoustodynamic system comprising an HBAR strongly coupled to a superconducting transmon qubit. The HBAR device is distinctive in the sense that its narrow mode spacing, together with enhanced qubit-mode coupling strength, gives rise to efficient coupling between the transmon and clusters of near-resonant modes. By harnessing the system properties, we observe collective dynamics involving clusters composed by two or three mechanical modes, where their non-resonant spectrum allows for the observation of the transition between the Dicke static regime to dynamically induced timed-Dicke one. The coherent collective behavior of the system is supported by time-domain measurements of the qubit's purity, indicating the quantum nature of the collective dynamics. Overall, our work establishes HBAR-based hybrid quantum system as a promising platform for exploring many-body collective dynamics in macroscopic mechanical systems.

quant-pharXiv:2603.20800•Mar 24, 2026•0 citations

Interfacing planar superconducting qubits with high overtone bulk acoustic phonons

Mikael Kervinen, Ilkka Rissanen, Mika A. Sillanpää

Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.

arXiv:1802.06642•Physical review. B./Physical review. B•May 29, 2018•46 citations

High-Fidelity Transmon Reset with a Multimode Acoustic Resonator

Andraž Omahen, Simon Storz, Igor Kladarić +1 more

Achieving sufficiently low residual excited-state populations remains a key challenge in superconducting quantum circuits, particularly for protocols operating close to noise limits or requiring repeated qubit initialization. Existing protocols primarily address this challenge through sophisticated control, engineered dissipation, or feedback mechanisms. Here, we demonstrate an alternative approach in which a superconducting qubit is reset using a physically distinct, intrinsically colder phononic bath. Specifically, we interface a transmon with a high-overtone bulk acoustic resonator (HBAR), enabling cooling of the qubit into GHz-frequency modes. Using this approach, we achieve a residual excited-state population of the qubit below $10^{-4}$, representing an improvement of one to two orders of magnitude compared to existing reset schemes. These results highlight the potential of phononic baths as a resource for high-fidelity qubit initialization in superconducting circuits.

quant-pharXiv:2604.08655•Physical Review Applied•Apr 13, 2026•1 citation

Epitaxial bulk acoustic wave resonators as highly coherent multi-phonon sources for quantum acoustodynamics

Vikrant Jayant Gokhale, Brian P. Downey, D. Scott Katzer +4 more

Abstract Solid-state quantum acoustodynamic (QAD) systems provide a compact platform for quantum information storage and processing by coupling acoustic phonon sources with superconducting or spin qubits. The multi-mode composite high-overtone bulk acoustic wave resonator (HBAR) is a popular phonon source well suited for QAD. However, scattering from defects, grain boundaries, and interfacial/surface roughness in the composite transducer severely limits the phonon relaxation time in sputter-deposited devices. Here, we grow an epitaxial-HBAR, consisting of a metallic NbN bottom electrode and a piezoelectric GaN film on a SiC substrate. The acoustic impedance-matched epi-HBAR has a power injection efficiency >99% from transducer to phonon cavity. The smooth interfaces and low defect density reduce phonon losses, yielding (f × Q) and phonon lifetimes up to 1.36 × 1017 Hz and 500 µs respectively. The GaN/NbN/SiC epi-HBAR is an electrically actuated, multi-mode phonon source that can be directly interfaced with NbN-based superconducting qubits or SiC-based spin qubits.

arXiv:2003.11097•Nature Communications•May 8, 2020•98 citations

Loss Mechanisms in High-coherence Multimode Mechanical Resonators Coupled to Superconducting Circuits

Raquel Garcia Belles, Alexander Anferov, Lukas F. Deeg +14 more

Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 $μ$s and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of $C_{T_2}=1.1\times10^5$. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.

quant-pharXiv:2602.22117•PRX Quantum•Feb 26, 2026•8 citations
In this work, we present a device consisting of two coupled transmon qubits, each of which are coupled to an independent high-overtone bulk acoustic wave resonator (HBAR). Both HBAR resonators support a plethora of acoustic modes, which can couple to the qubit near resonantly. We first show qubit–qubit interaction in the multimode system and, finally, quantum state transfer where an excitation is swapped from an HBAR mode of one qubit to an HBAR mode of the other qubit.
As superconducting quantum computing devices grow more and more powerful [1–3], the quest to connect them over large-scale distances [4] becomes increasingly relevant. Microwave-to-optical transducers offer a pathway for such connections via a low-loss and thermal noise-free optical fiber network. However, achieving simultaneously high efficiency and low added noise is currently limited by a trade-off between both quantities due to pump absorption heating [5–9]. High-overtone bulk acoustic-wave resonators (HBARs) promise a solution to this problem due to their crystalline material and low surface-to-bulk ratio. In this thesis, we introduce an HBAR-based microwave-to-optical transducer to achieve quantum state transfer. As a first milestone, we build a Brillouin-optomechanical cavity that self-aligns when cooled down and is relatively insensitive to vibrations, which allows optomechanical coupling in an environment that is compatible with superconducting circuits. We measure the phonon mode occupation of the HBAR to be below 0.5, demonstrating the heaviest mechanical object measured in the quantum ground state to date. In addition, we show that the mode occupations are insensitive to laser pump power, indicating negligible absorption heating and confirming the unique advantage of this system. We then build a transducer device which combines Brillouin-optomechanical coupling and piezo-electromechanical coupling to a superconducting qubit in one geometry. We can align the optical cavity mode to pass through the ring-shaped antenna of the superconducting qubit without affecting the optical finesse. This allows us to measure optomechanical coupling in this device as a next milestone towards high-efficiency, low noise microwave-to-optical transduction.
Collective dynamics in engineered quantum systems offer a unique and versatile platform for exploring how many-body correlations bridge microscopic entanglement and macroscopic behavior. In this work, we report collective Dicke dynamics of acoustic modes in a macroscopic high-overtone bulk acoustic resonator (HBAR). To achieve this, we engineer a hybrid quantum acoustodynamic system comprising an HBAR strongly coupled to a superconducting transmon qubit. The HBAR device is distinctive in the sense that its narrow mode spacing, together with enhanced qubit-mode coupling strength, gives rise to efficient coupling between the transmon and clusters of near-resonant modes. By harnessing the system properties, we observe collective dynamics involving clusters composed by two or three mechanical modes, where their non-resonant spectrum allows for the observation of the transition between the Dicke static regime to dynamically induced timed-Dicke one. The coherent collective behavior of the system is supported by time-domain measurements of the qubit's purity, indicating the quantum nature of the collective dynamics. Overall, our work establishes HBAR-based hybrid quantum system as a promising platform for exploring many-body collective dynamics in macroscopic mechanical systems.
Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.
Achieving sufficiently low residual excited-state populations remains a key challenge in superconducting quantum circuits, particularly for protocols operating close to noise limits or requiring repeated qubit initialization. Existing protocols primarily address this challenge through sophisticated control, engineered dissipation, or feedback mechanisms. Here, we demonstrate an alternative approach in which a superconducting qubit is reset using a physically distinct, intrinsically colder phononic bath. Specifically, we interface a transmon with a high-overtone bulk acoustic resonator (HBAR), enabling cooling of the qubit into GHz-frequency modes. Using this approach, we achieve a residual excited-state population of the qubit below 10−410^{-4}10−4, representing an improvement of one to two orders of magnitude compared to existing reset schemes. These results highlight the potential of phononic baths as a resource for high-fidelity qubit initialization in superconducting circuits.
Abstract Solid-state quantum acoustodynamic (QAD) systems provide a compact platform for quantum information storage and processing by coupling acoustic phonon sources with superconducting or spin qubits. The multi-mode composite high-overtone bulk acoustic wave resonator (HBAR) is a popular phonon source well suited for QAD. However, scattering from defects, grain boundaries, and interfacial/surface roughness in the composite transducer severely limits the phonon relaxation time in sputter-deposited devices. Here, we grow an epitaxial-HBAR, consisting of a metallic NbN bottom electrode and a piezoelectric GaN film on a SiC substrate. The acoustic impedance-matched epi-HBAR has a power injection efficiency >99% from transducer to phonon cavity. The smooth interfaces and low defect density reduce phonon losses, yielding (f × Q) and phonon lifetimes up to 1.36 × 1017 Hz and 500 µs respectively. The GaN/NbN/SiC epi-HBAR is an electrically actuated, multi-mode phonon source that can be directly interfaced with NbN-based superconducting qubits or SiC-based spin qubits.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 μμμs and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2=1.1×105C_{T_2}=1.1\times10^5CT2​​=1.1×105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.