Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2509.24551 · Physical Review Applied

Broadband magnetless isolation in a flux-pumped, dispersion-engineered transmission line

Mael Demarets, A. M. Vadiraj, Christophe Caloz, Kristiaan De Greve

Published May 13, 2026• 1 citation
arXivHTMLPDF

Abstract

Isolators are commonly found in the amplification chain of microwave setups to shield sensitive devices such as superconducting qubits from noise and back-scattered signals. Conventional ferrite-based isolators are bulky, lossy and rely on strong magnetic fields, which pose challenges for their co-integration in large-scale superconducting devices. Although several magnetless approaches based on parametric modulation have been explored to overcome these limitations, none has yet experimentally demonstrated wideband isolation on par with ferrite devices. Here, we propose a compact modulation-based isolator that achieves large isolation bandwidth using a dispersion-engineered transmission line. The engineered line forms an effective two-mode system that enables broadband isolation by supporting adiabatic mode conversion over a wide instantaneous bandwidth. Numerical simulations show that this architecture can provide more than 20 dB isolation across 4 - 8 GHz, matching the performance of ferrite-based isolators. Moreover, we propose an on-chip superconducting device implementation that shows promise against parameter variations and enables a scalable path for co-integration with future large-scale superconducting systems.

DOI
10.1103/vjy5-wxpy

Related papers

Broadband Microwave Isolation with Adiabatic Mode Conversion in Coupled Superconducting Transmission Lines

Mahdi Naghiloo, Kaidong Peng, Yufeng Ye +2 more

We propose a traveling wave scheme for broadband microwave isolation using parametric mode conversion in conjunction with adiabatic phase matching technique in a pair of coupled nonlinear transmission lines. This scheme is compatible with the circuit quantum electrodynamics architecture (cQED) and provides isolation without introducing additional quantum noise. We first present the scheme in a general setting then propose an implementation with Josephson junction transmission lines. Numerical simulation shows more than 20 dB isolation over an octave bandwidth (4-8\,GHz) in a 2000 unit cell device with less than 0.05 dB insertion loss dominated by dielectric loss.

arXiv:2103.07793•Mar 13, 2021•8 citations

Wideband Josephson Parametric Isolator

M.A. Beck, M. Selvanayagam, April Carniol +2 more

The cryogenic hardware required to build a superconducting-qubit-based quantum computer demands a variety of microwave components. These elements include microwave couplers, filters, amplifiers, and circulators and/or isolators. Traditionally implemented as discrete components, integration of this peripheral hardware, in an effort to reduce overall footprint, thermal load, and added noise, is a key challenge to scaling modern quantum processors with qubit counts climbing over the one hundred plus mark. Ferrite-based microwave isolators, generally employed in the readout chain to decouple qubits and resonators from readout electronics, persist as one of the volumetrically largest devices still utilized as discrete components. Here, we present an alternative two-port isolating integrated circuit derived from the dc superconducting quantum interference device (dc SQUID). Nonreciprocal transmission is achieved using the three-wave microwave-mixing properties of a flux-modulated dc SQUID. We show that when multiple dc SQUIDs are embedded in a multipole admittance-inverting filter structure, the three-wave mixing derived from the flux pumping of the dc SQUIDs can provide directional microwave power flow. For a three-pole filter device, we experimentally demonstrate a directionality greater than 15 dB over a 600-MHz bandwidth.

arXiv:2212.08563•Physical Review Applied•Sep 22, 2023•14 citations

Engineered broadband Purcell protection using a shared $Π$ filter for multiplexed superconducting qubits

Samuel D. Escribano, Yael Kriheli, Samuel Goldstein +2 more

We propose a broadband Purcell-protection scheme based on a single shared filter integrated directly into the feedline, enabling simultaneous protection of multiple qubits in a compact architecture with minimal hardware overhead. The filter consists of two open-ended stubs connected by an in-line transmission line, forming a $Π$ geometry, and operates via engineered passive microwave interference that suppresses the real part of the environmental admittance over a wide frequency window. Circuit simulations and finite-element modeling show that transmission is suppressed by several orders of magnitude within the target band (the qubits' frequencies) while preserving the readout mode of the multiplexed architecture. For realistic device parameters, the proposed design yields Purcell-limited relaxation times exceeding $1$ ms over a frequency span of approximately $1.5$ GHz. Our results establish the $Π$ filter as a compact and scalable solution for broadband impedance engineering in superconducting quantum circuits, compatible with standard dispersive readout protocols.

quant-pharXiv:2604.18387•Physical Review Applied•Apr 21, 2026•1 citation

Magnetic-Free Traveling-Wave Nonreciprocal Superconducting Microwave Components

Dengke Zhang, Jaw-Shen Tsai

We propose a design to realize integrated broadband nonreciprocal microwave isolators and circulators using superconducting circuit elements without any magnetic materials. To obtain a broadband response, we develop a waveguide-based design by temporal modulations. The corresponding compact traveling-wave structure is implemented with integrated superconducting composite right-/left-handed transmission lines. The calculations show that the bandwidth of 580 MHz can be realized over a nonreciprocal isolation of 20 dB in reflections. Such on-chip isolators and circulators are useful for cryogenic integrated microwave connections and measurements, such as protecting qubits from the amplified reflected signal in multiplexed readout.

arXiv:2106.02928•Physical Review Applied•Jun 4, 2021•10 citations

Active isolation of transmon readout with a tunable inductive bridge

Chunyang Ding, Chuyao Tong, Paul Varosy +5 more

Scalable superconducting quantum computation requires fast, high-fidelity readout. Currently, this is assisted through cryogenic amplification of the readout signal. In traditional dispersive readout schemes, the amplifiers that are used to provide high signal-to-noise ratio also generate thermal noise that can decohere the qubits, demanding additional ferrite-based isolators to suppress this noise. Here, we integrate a chip-scale microwave switch, the tunable inductive bridge, into the readout chain of a fixed-frequency transmon. Flux-pulsing the switch, such that it transmits only during the readout, did not make a discernable difference to qubit coherence, residual excited-state population, or readout fidelity metrics. By injecting broadband noise that mimics amplifier thermal photons, we show that the switch suppresses the resulting qubit dephasing by more than $30$~dB, consistent with its independently measured on-off ratio, establishing it as a potential chip-based integrated replacement for readout-chain isolators.

quant-pharXiv:2610.27137•Oct 21, 2026•0 citations

A persistent-current-biased and current-actuated switch for superconducting circuits

Ziyi Zhao, Eva Gurra, Michael R. Vissers +1 more

Broadband and low-loss superconducting switches can facilitate large-scale quantum information processors and cryogenic detectors by dynamically reconfiguring the connectivity of their circuits. The time dependent connectivity is enabled by the nonlinearity of lossless Josephson junctions, which are often wired into superconducting loops to be controlled by magnetic flux. However, this approach needs a power-consuming constant flux bias and dynamic flux actuation, both of which are hard to isolate from other switches or flux sensitive elements, limiting their integration density. Here, we design and characterize a microwave switch that implements a persistent current bias and direct current actuation to reduce static power consumption, actuation energy and potential crosstalk to other devices. We show that persistent current associated with tens of flux quanta is stable and long-lived, reducing the need for on-the-fly tuning. We further demonstrate that our switch has desirable performance for superconducting-circuit-based quantum information processing, including an off mode with more than 20 dB isolation comparable to commercial ferrite isolators, power handling larger than 100 pW sufficient for resonator readout tones and amplifier pumps, and modulation bandwidth broader than 600 MHz useful for multiplexing schemes.

quant-pharXiv:2603.06472•Mar 9, 2026•1 citation
Isolators are commonly found in the amplification chain of microwave setups to shield sensitive devices such as superconducting qubits from noise and back-scattered signals. Conventional ferrite-based isolators are bulky, lossy and rely on strong magnetic fields, which pose challenges for their co-integration in large-scale superconducting devices. Although several magnetless approaches based on parametric modulation have been explored to overcome these limitations, none has yet experimentally demonstrated wideband isolation on par with ferrite devices. Here, we propose a compact modulation-based isolator that achieves large isolation bandwidth using a dispersion-engineered transmission line. The engineered line forms an effective two-mode system that enables broadband isolation by supporting adiabatic mode conversion over a wide instantaneous bandwidth. Numerical simulations show that this architecture can provide more than 20 dB isolation across 4 - 8 GHz, matching the performance of ferrite-based isolators. Moreover, we propose an on-chip superconducting device implementation that shows promise against parameter variations and enables a scalable path for co-integration with future large-scale superconducting systems.
We propose a traveling wave scheme for broadband microwave isolation using parametric mode conversion in conjunction with adiabatic phase matching technique in a pair of coupled nonlinear transmission lines. This scheme is compatible with the circuit quantum electrodynamics architecture (cQED) and provides isolation without introducing additional quantum noise. We first present the scheme in a general setting then propose an implementation with Josephson junction transmission lines. Numerical simulation shows more than 20 dB isolation over an octave bandwidth (4-8\,GHz) in a 2000 unit cell device with less than 0.05 dB insertion loss dominated by dielectric loss.
The cryogenic hardware required to build a superconducting-qubit-based quantum computer demands a variety of microwave components. These elements include microwave couplers, filters, amplifiers, and circulators and/or isolators. Traditionally implemented as discrete components, integration of this peripheral hardware, in an effort to reduce overall footprint, thermal load, and added noise, is a key challenge to scaling modern quantum processors with qubit counts climbing over the one hundred plus mark. Ferrite-based microwave isolators, generally employed in the readout chain to decouple qubits and resonators from readout electronics, persist as one of the volumetrically largest devices still utilized as discrete components. Here, we present an alternative two-port isolating integrated circuit derived from the dc superconducting quantum interference device (dc SQUID). Nonreciprocal transmission is achieved using the three-wave microwave-mixing properties of a flux-modulated dc SQUID. We show that when multiple dc SQUIDs are embedded in a multipole admittance-inverting filter structure, the three-wave mixing derived from the flux pumping of the dc SQUIDs can provide directional microwave power flow. For a three-pole filter device, we experimentally demonstrate a directionality greater than 15 dB over a 600-MHz bandwidth.
Engineered broadband Purcell protection using a shared ΠΠΠ filter for multiplexed superconducting qubits
We propose a broadband Purcell-protection scheme based on a single shared filter integrated directly into the feedline, enabling simultaneous protection of multiple qubits in a compact architecture with minimal hardware overhead. The filter consists of two open-ended stubs connected by an in-line transmission line, forming a ΠΠΠ geometry, and operates via engineered passive microwave interference that suppresses the real part of the environmental admittance over a wide frequency window. Circuit simulations and finite-element modeling show that transmission is suppressed by several orders of magnitude within the target band (the qubits' frequencies) while preserving the readout mode of the multiplexed architecture. For realistic device parameters, the proposed design yields Purcell-limited relaxation times exceeding 111 ms over a frequency span of approximately 1.51.51.5 GHz. Our results establish the ΠΠΠ filter as a compact and scalable solution for broadband impedance engineering in superconducting quantum circuits, compatible with standard dispersive readout protocols.
We propose a design to realize integrated broadband nonreciprocal microwave isolators and circulators using superconducting circuit elements without any magnetic materials. To obtain a broadband response, we develop a waveguide-based design by temporal modulations. The corresponding compact traveling-wave structure is implemented with integrated superconducting composite right-/left-handed transmission lines. The calculations show that the bandwidth of 580 MHz can be realized over a nonreciprocal isolation of 20 dB in reflections. Such on-chip isolators and circulators are useful for cryogenic integrated microwave connections and measurements, such as protecting qubits from the amplified reflected signal in multiplexed readout.
Scalable superconducting quantum computation requires fast, high-fidelity readout. Currently, this is assisted through cryogenic amplification of the readout signal. In traditional dispersive readout schemes, the amplifiers that are used to provide high signal-to-noise ratio also generate thermal noise that can decohere the qubits, demanding additional ferrite-based isolators to suppress this noise. Here, we integrate a chip-scale microwave switch, the tunable inductive bridge, into the readout chain of a fixed-frequency transmon. Flux-pulsing the switch, such that it transmits only during the readout, did not make a discernable difference to qubit coherence, residual excited-state population, or readout fidelity metrics. By injecting broadband noise that mimics amplifier thermal photons, we show that the switch suppresses the resulting qubit dephasing by more than 303030~dB, consistent with its independently measured on-off ratio, establishing it as a potential chip-based integrated replacement for readout-chain isolators.
Broadband and low-loss superconducting switches can facilitate large-scale quantum information processors and cryogenic detectors by dynamically reconfiguring the connectivity of their circuits. The time dependent connectivity is enabled by the nonlinearity of lossless Josephson junctions, which are often wired into superconducting loops to be controlled by magnetic flux. However, this approach needs a power-consuming constant flux bias and dynamic flux actuation, both of which are hard to isolate from other switches or flux sensitive elements, limiting their integration density. Here, we design and characterize a microwave switch that implements a persistent current bias and direct current actuation to reduce static power consumption, actuation energy and potential crosstalk to other devices. We show that persistent current associated with tens of flux quanta is stable and long-lived, reducing the need for on-the-fly tuning. We further demonstrate that our switch has desirable performance for superconducting-circuit-based quantum information processing, including an off mode with more than 20 dB isolation comparable to commercial ferrite isolators, power handling larger than 100 pW sufficient for resonator readout tones and amplifier pumps, and modulation bandwidth broader than 600 MHz useful for multiplexing schemes.