Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2604.18387 · Physical Review Applied

Engineered broadband Purcell protection using a shared $Π$ filter for multiplexed superconducting qubits

Samuel D. Escribano, Yael Kriheli, Samuel Goldstein, Daniel Dahan, Nadav Katz

quant-phSubmitted Apr 20, 2026• Announced Apr 21, 2026• 1 citation• Revised Sep 12, 2026 (v2)
v1 · Apr 20, 2026v2 · Sep 12, 2026
arXivHTMLPDF

Abstract

We propose a broadband Purcell-protection scheme based on a single shared filter integrated directly into the feedline, enabling simultaneous protection of multiple qubits in a compact architecture with minimal hardware overhead. The filter consists of two open-ended stubs connected by an in-line transmission line, forming a $Π$ geometry, and operates via engineered passive microwave interference that suppresses the real part of the environmental admittance over a wide frequency window. Circuit simulations and finite-element modeling show that transmission is suppressed by several orders of magnitude within the target band (the qubits' frequencies) while preserving the readout mode of the multiplexed architecture. For realistic device parameters, the proposed design yields Purcell-limited relaxation times exceeding $1$ ms over a frequency span of approximately $1.5$ GHz. Our results establish the $Π$ filter as a compact and scalable solution for broadband impedance engineering in superconducting quantum circuits, compatible with standard dispersive readout protocols.

Journal reference
Phys. Rev. Applied 26, 034026 (2026)
DOI
10.1103/nf7j-841f
Comments
15 pages, 7 figures. Final version

Related papers

Characterization of broadband Purcell filters with compact footprint for fast multiplexed superconducting qubit readout

Seong Hyeon Park, Gahyun Choi, Gyunghun Kim +6 more

Engineering the admittance of external environments connected to superconducting qubits is essential, as increasing the measurement speed introduces spontaneous emission loss to superconducting qubits, known as Purcell loss. Here, we report a broadband Purcell filter within a small footprint, which effectively suppresses Purcell loss without losing the fast measurement speed. We characterize the filter's frequency response at 4.3 K and also estimate Purcell loss suppression by finite-element-method simulations of superconducting planar circuit layouts with the proposed filter design. The filter is fabricated with 200 nm-thick niobium films and shows the measured bandwidth over 790 MHz within 0.29 mm2 of compact size owing to densely packed spiral resonators. The estimated lifetime enhancement indicates the effective protection of the qubit from Purcell loss. The presented filter design is expected to be easily integrated on existing superconducting quantum circuits for fast and multiplexed readout without occupying large footprint.

arXiv:2310.13282•Applied Physics Letters•Jan 22, 2024•8 citations

Broadband Purcell Filter for Fast Superconducting Qubit Reset and Readout

Yu Zhao, Zhixu Chen, Hanxian Liu +12 more

Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.

quant-pharXiv:2609.14081•Sep 15, 2026•1 citation

A Compact Broadband Purcell Filter for Superconducting Quantum Circuits in a 3D Flip-Chip Architecture

Zhen Luo, Lea Richard, Ivan Tsitsilin +4 more

Fast and high-fidelity qubit readout requires strong coupling between the readout resonator and the feedline. However, such coupling unavoidably enhances qubit decay through the Purcell effect. We present a four-pole broadband Purcell filter implemented on a 3D flip-chip platform to overcome this trade-off. The filter provides a flat 1 GHz passband centered at 7.68 GHz and achieves more than 45 dB suppression at typical qubit frequencies. We demonstrate the filter's compatibility with multiplexed readout using a test chip that integrates six floating readout resonators strongly coupled within the passband. The chip is fabricated using a 150 nm Niobium (Nb) thin-film process and characterized at 20 mK in a cryogenic measurement setup. We also develop an analytical model that accurately captures the filter response and determines the resonance frequencies and external quality factors of the floating resonators directly from their physical geometry, enabling rapid circuit synthesis and design optimization. The proposed design is compact and fabrication-tolerant, making it a practical solution for large-scale superconducting quantum processors.

quant-pharXiv:2603.16693•IEEE Transactions on Microwave Theory and Techniques•Mar 18, 2026•0 citations

Sub-resonant wideband superconducting Purcell filters

Basil M. Smitham, Jeronimo G. C. Martinez, Christie Chiu +1 more

In superconducting quantum devices, Purcell filters protect qubit information from decaying into external lines by reducing external coupling at qubit frequencies while maintaining it at readout frequencies. Here, we introduce and demonstrate a novel Purcell filter design that places the readout resonator frequencies in a "linewidth plateau" below the filter's first resonant mode. This approach, based on direct admittance engineering, can simultaneously achieve strong qubit protection and nearly constant external coupling across a wide readout bandwidth, addressing the traditional tradeoff between these properties. We first present a lumped-element analysis of our filters. We then experimentally demonstrate a compact on-chip linewidth-plateau filter, coupled to four resonators across its approximately 1 GHz readout band. We compare the measured linewidths to numerical predictions, and show how the filter protects a frequency-tunable transmon qubit from external decay. We envision that our flexible design paradigm will aid in efforts to create multiplexed readout architectures for superconducting quantum circuits, with well-controlled external couplings.

arXiv:2503.10750•Mar 13, 2025•3 citations

Broadband bandpass Purcell filter for circuit quantum electrodynamics

Haoxiong Yan, Xuntao Wu, Andrew Lingenfelter +10 more

In circuit quantum electrodynamics, qubits are typically measured using dispersively coupled readout resonators. Coupling between each readout resonator and its electrical environment, however, reduces the qubit lifetime via the Purcell effect. Inserting a Purcell filter counters this effect while maintaining high readout fidelity but reduces measurement bandwidth and, thus, limits multiplexing readout capacity. In this Letter, we develop and implement a multi-stage bandpass Purcell filter that yields better qubit protection while simultaneously increasing measurement bandwidth and multiplexed capacity. We report on the experimental performance of our transmission-line-based implementation of this approach, a flexible design that can easily be integrated with current scaled-up, long coherence time superconducting quantum processors.

arXiv:2306.06258•Applied Physics Letters•Sep 25, 2023•19 citations

3D Integrated Embedded Filters for Superconducting Quantum Circuits

Waqas Ahmad, Gioele Consani, Mohammad Tasnimul Haque +2 more

Microwave filtering for superconducting qubits is a key element of quantum computing technology, enabling high coherence and fast state detection. This work presents the design and implementation of novel microwave Purcell filters for superconducting quantum circuits, integrated within a multilayer printed circuit board (PCB). The off-chip design removes all filter components from the qubit substrate, reducing device complexity, improving layout footprint and allowing better scalability to large qubit counts. Each embedded filter can couple up to nine readout resonators, enabling efficient multiplexed readout. Electromagnetic simulations of the filter predict a thousand-fold improvement in qubit isolation from the readout port. The design was experimentally validated under cryogenic conditions in conjunction with a 35-qubit device, demonstrating compatibility of the PCB-based filter with high-coherence superconducting qubits. The comparison of the measured qubit median T1 of 84 $μ$s with the expected radiative limit from electromagnetic simulations validated the presence of Purcell filtering in the system.

quant-pharXiv:2602.24003•Mar 2, 2026•1 citation
Engineered broadband Purcell protection using a shared ΠΠΠ filter for multiplexed superconducting qubits
We propose a broadband Purcell-protection scheme based on a single shared filter integrated directly into the feedline, enabling simultaneous protection of multiple qubits in a compact architecture with minimal hardware overhead. The filter consists of two open-ended stubs connected by an in-line transmission line, forming a ΠΠΠ geometry, and operates via engineered passive microwave interference that suppresses the real part of the environmental admittance over a wide frequency window. Circuit simulations and finite-element modeling show that transmission is suppressed by several orders of magnitude within the target band (the qubits' frequencies) while preserving the readout mode of the multiplexed architecture. For realistic device parameters, the proposed design yields Purcell-limited relaxation times exceeding 111 ms over a frequency span of approximately 1.51.51.5 GHz. Our results establish the ΠΠΠ filter as a compact and scalable solution for broadband impedance engineering in superconducting quantum circuits, compatible with standard dispersive readout protocols.
Engineering the admittance of external environments connected to superconducting qubits is essential, as increasing the measurement speed introduces spontaneous emission loss to superconducting qubits, known as Purcell loss. Here, we report a broadband Purcell filter within a small footprint, which effectively suppresses Purcell loss without losing the fast measurement speed. We characterize the filter's frequency response at 4.3 K and also estimate Purcell loss suppression by finite-element-method simulations of superconducting planar circuit layouts with the proposed filter design. The filter is fabricated with 200 nm-thick niobium films and shows the measured bandwidth over 790 MHz within 0.29 mm2 of compact size owing to densely packed spiral resonators. The estimated lifetime enhancement indicates the effective protection of the qubit from Purcell loss. The presented filter design is expected to be easily integrated on existing superconducting quantum circuits for fast and multiplexed readout without occupying large footprint.
Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.
Fast and high-fidelity qubit readout requires strong coupling between the readout resonator and the feedline. However, such coupling unavoidably enhances qubit decay through the Purcell effect. We present a four-pole broadband Purcell filter implemented on a 3D flip-chip platform to overcome this trade-off. The filter provides a flat 1 GHz passband centered at 7.68 GHz and achieves more than 45 dB suppression at typical qubit frequencies. We demonstrate the filter's compatibility with multiplexed readout using a test chip that integrates six floating readout resonators strongly coupled within the passband. The chip is fabricated using a 150 nm Niobium (Nb) thin-film process and characterized at 20 mK in a cryogenic measurement setup. We also develop an analytical model that accurately captures the filter response and determines the resonance frequencies and external quality factors of the floating resonators directly from their physical geometry, enabling rapid circuit synthesis and design optimization. The proposed design is compact and fabrication-tolerant, making it a practical solution for large-scale superconducting quantum processors.
In superconducting quantum devices, Purcell filters protect qubit information from decaying into external lines by reducing external coupling at qubit frequencies while maintaining it at readout frequencies. Here, we introduce and demonstrate a novel Purcell filter design that places the readout resonator frequencies in a "linewidth plateau" below the filter's first resonant mode. This approach, based on direct admittance engineering, can simultaneously achieve strong qubit protection and nearly constant external coupling across a wide readout bandwidth, addressing the traditional tradeoff between these properties. We first present a lumped-element analysis of our filters. We then experimentally demonstrate a compact on-chip linewidth-plateau filter, coupled to four resonators across its approximately 1 GHz readout band. We compare the measured linewidths to numerical predictions, and show how the filter protects a frequency-tunable transmon qubit from external decay. We envision that our flexible design paradigm will aid in efforts to create multiplexed readout architectures for superconducting quantum circuits, with well-controlled external couplings.
In circuit quantum electrodynamics, qubits are typically measured using dispersively coupled readout resonators. Coupling between each readout resonator and its electrical environment, however, reduces the qubit lifetime via the Purcell effect. Inserting a Purcell filter counters this effect while maintaining high readout fidelity but reduces measurement bandwidth and, thus, limits multiplexing readout capacity. In this Letter, we develop and implement a multi-stage bandpass Purcell filter that yields better qubit protection while simultaneously increasing measurement bandwidth and multiplexed capacity. We report on the experimental performance of our transmission-line-based implementation of this approach, a flexible design that can easily be integrated with current scaled-up, long coherence time superconducting quantum processors.
Microwave filtering for superconducting qubits is a key element of quantum computing technology, enabling high coherence and fast state detection. This work presents the design and implementation of novel microwave Purcell filters for superconducting quantum circuits, integrated within a multilayer printed circuit board (PCB). The off-chip design removes all filter components from the qubit substrate, reducing device complexity, improving layout footprint and allowing better scalability to large qubit counts. Each embedded filter can couple up to nine readout resonators, enabling efficient multiplexed readout. Electromagnetic simulations of the filter predict a thousand-fold improvement in qubit isolation from the readout port. The design was experimentally validated under cryogenic conditions in conjunction with a 35-qubit device, demonstrating compatibility of the PCB-based filter with high-coherence superconducting qubits. The comparison of the measured qubit median T1 of 84 μμμs with the expected radiative limit from electromagnetic simulations validated the presence of Purcell filtering in the system.