Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.06472

A persistent-current-biased and current-actuated switch for superconducting circuits

Ziyi Zhao, Eva Gurra, Michael R. Vissers, K. W. Lehnert

quant-phSubmitted Mar 6, 2026• Announced Mar 9, 2026• 1 citation
arXivHTMLPDF

Abstract

Broadband and low-loss superconducting switches can facilitate large-scale quantum information processors and cryogenic detectors by dynamically reconfiguring the connectivity of their circuits. The time dependent connectivity is enabled by the nonlinearity of lossless Josephson junctions, which are often wired into superconducting loops to be controlled by magnetic flux. However, this approach needs a power-consuming constant flux bias and dynamic flux actuation, both of which are hard to isolate from other switches or flux sensitive elements, limiting their integration density. Here, we design and characterize a microwave switch that implements a persistent current bias and direct current actuation to reduce static power consumption, actuation energy and potential crosstalk to other devices. We show that persistent current associated with tens of flux quanta is stable and long-lived, reducing the need for on-the-fly tuning. We further demonstrate that our switch has desirable performance for superconducting-circuit-based quantum information processing, including an off mode with more than 20 dB isolation comparable to commercial ferrite isolators, power handling larger than 100 pW sufficient for resonator readout tones and amplifier pumps, and modulation bandwidth broader than 600 MHz useful for multiplexing schemes.

Related papers

Microwave Switch Architecture for Superconducting Integrated Circuits Using Magnetic Field-Tunable Josephson Junctions

A. L. Graninger, J. M. Cochran, Aaron A. Pesetski +5 more

We report on the design, fabrication, and measurement of a low-temperature microwave switch architecture that can be fully integrated on chip using single Josephson junctions and superconducting bias lines. The basic switching element used is a reflective single-pole-single-throw switch that is realized by tuning the critical current of a single Josephson junction by way of a local flux bias. A single-pole-single-throw switch is demonstrated at 4.2 K to have anon/offratio in excess of 20 dB up to 12 GHz. This element is then incorporated into the design of a single-pole-double-throw switch that exhibits anon/offratio above 20 dB up to 10 GHz. The switches require no intrinsic power dissipation in either state, and their performance was verified for input powers of$-$100 to$-$60 dBm. S-parameter simulations using a simple lumped element model are in good agreement with the experimental data, allowing for the design to be extended to larger switch architectures.

IEEE Transactions on Applied Superconductivity•Apr 20, 2023•7 citations

Superconducting Flux Memory for Cryogenic Applications

Gregory R. Boyd, Jeremy Clark, Mark Covington +15 more

We report the development of flux memory for use with superconducting circuits. This technology stores persistent currents in superconducting loops on-chip to be used to provide flux biasing for superconducting circuits, like qubits. We developed three types of flux memory and draw comparisons among them for circuit design. We demonstrate the utility of flux memory by using an in-situ flux detector and characterize each approach and further demonstrate that once flux is set in a memory cell, benchtop DC control sources can be powered off, leaving the on-chip flux bias in place. We propose that flux memory can be arranged in a two-dimensional configuration to multiplex control signals and reduce how line counts scale (N^2 devices -> 2N control lines), and our experimental results pave the path to the proposed scalability. We demonstrate the use of flux memory to flux bias a transmon qubit and show the tunability of the qubit state to a target frequency which remained stable on-chip for 20 hours.

quant-pharXiv:2609.00772•Sep 2, 2026•0 citations

Voltage-controlled superconducting magnetic memory

Ahmed Kenawy, Wim Magnus, M. V. Miloševıć +1 more

Over the past few decades, superconducting circuits have been used to realize various novel electronic devices such as quantum bits, SQUIDs, parametric amplifiers, etc. One domain, however, where superconducting circuits fall short is information storage. Superconducting memories are based on the quantization of magnetic flux in superconducting loops. Standard implementations store information as magnetic flux quanta in a superconducting loop interrupted by two Josephson junctions (i.e., a SQUID). However, due to the large inductance required, the size of the SQUID loop cannot be scaled below several micrometers, resulting in low-density memory chips. Here, we propose a scalable memory consisting of a voltage-biased superconducting ring threaded by a half-quantum flux bias. By numerically solving the time-dependent Ginzburg-Landau equations, we show that applying a time-dependent bias voltage in the microwave range constitutes a writing mechanism to change the number of stored flux quanta within the ring. Since the proposed device does not require a large loop inductance, it can be scaled down, enabling a high-density memory technology.

AIP Advances•Dec 1, 2019•2 citations

Reduced Power Consumption in Superconducting Electronics

Thomas Ortlepp, Olaf Wetzstein, Sonja Engert +2 more

Rapid single flux quantum (RSFQ) electronics is based on the Josephson junction as an active switching element. In standard RSFQ circuits its switching energy is much lower than the static power consumption caused by the resistive current distribution network. Due to this thermal heating of the chip, the maximum number of junctions on a single chip is limited to about 1 million. The frequency-dependent contribution to power dissipation from junction switchings is only about 2 percent of the static one. This fact limits the direct construction of VLSI systems for high-performance computing as well as small-scale circuit applications in the vicinity of ultra-sensitive detectors or even quantum circuits. We present an assessment of different approaches for reducing the static power consumption by investigating the potential of inductive bias distribution networks as well as reduced critical currents. We analyse the operation stability of simple digital circuits with 5 times smaller critical currents at 4.2 K. The combination of the reduced critical currents and inductive biasing can provide digital superconductive circuits with significantly reduced static power consumption.

IEEE Transactions on Applied Superconductivity•Mar 29, 2011•39 citations

A fast and large bandwidth superconducting variable coupler

H.-S. Chang, K. J. Satzinger, Y. P. Zhong +8 more

Variable microwave-frequency couplers are highly useful components in classical communication systems and likely will play an important role in quantum communication applications. Conventional semiconductor-based microwave couplers have been used with superconducting quantum circuits, enabling, for example, the in situ measurements of multiple devices via a common readout chain. However, the semiconducting elements are lossy and furthermore dissipate energy when switched, making them unsuitable for cryogenic applications requiring rapid, repeated switching. Superconducting Josephson junction-based couplers can be designed for dissipation-free operation with fast switching and are easily integrated with superconducting quantum circuits. These enable on-chip, quantum-coherent routing of microwave photons, providing an appealing alternative to semiconductor switches. Here, we present and characterize a chip-based broadband microwave variable coupler, tunable over 4–8 GHz with over 1.5 GHz instantaneous bandwidth, based on the superconducting quantum interference device with two parallel Josephson junctions. The coupler is dissipation-free and features large on-off ratios in excess of 40 dB, and the coupling can be changed in about 10 ns. The simple design presented here can be readily integrated with superconducting qubit circuits and can be easily generalized to realize a four- or more port device.

arXiv:2011.09442•Applied Physics Letters•Dec 14, 2020•10 citations

Flux-bias-free flux qubit driven by low-power single-flux-quantum driver on monolithically integrated circuit

Duong Pham, Tomoharu Ueda, Shigeyuki Miyajima +5 more

Single-flux-quantum (SFQ) cryogenic control circuits are a promising approach for realizing scalable superconducting quantum processors. However, previous studies have primarily relied on conventional SFQ technologies with Josephson junction critical current densities ( \(J_{\mathrm{C}}\) ) of about 1 kA/cm 2 and critical currents ( \(I_{\mathrm{C}}\) ) of several hundred microamperes. Such large critical currents can increase power dissipation and induce nonequilibrium quasiparticles that degrade qubit performance. In this study, we demonstrate coherent control of a flux-bias-free (FBF) flux qubit using a low-power SFQ driver monolithically integrated on the same chip. The SFQ driver was fabricated using epitaxial NbN/AlN/NbN Josephson junctions with critical currents of only a few microamperes, approximately two orders of magnitude smaller than those used in conventional SFQ circuits. Using this low- \(I_{\mathrm{C}}\) SFQ driver, we found that the energy relaxation time, \(T_{1}\) , of the FBF qubit remains comparable to that obtained under conventional microwave control, indicating that the low- \(I_{\mathrm{C}}\) SFQ driver does not introduce a measurable degradation of qubit performance in the present device.

EPJ Quantum Technology•Jul 9, 2026•0 citations
Broadband and low-loss superconducting switches can facilitate large-scale quantum information processors and cryogenic detectors by dynamically reconfiguring the connectivity of their circuits. The time dependent connectivity is enabled by the nonlinearity of lossless Josephson junctions, which are often wired into superconducting loops to be controlled by magnetic flux. However, this approach needs a power-consuming constant flux bias and dynamic flux actuation, both of which are hard to isolate from other switches or flux sensitive elements, limiting their integration density. Here, we design and characterize a microwave switch that implements a persistent current bias and direct current actuation to reduce static power consumption, actuation energy and potential crosstalk to other devices. We show that persistent current associated with tens of flux quanta is stable and long-lived, reducing the need for on-the-fly tuning. We further demonstrate that our switch has desirable performance for superconducting-circuit-based quantum information processing, including an off mode with more than 20 dB isolation comparable to commercial ferrite isolators, power handling larger than 100 pW sufficient for resonator readout tones and amplifier pumps, and modulation bandwidth broader than 600 MHz useful for multiplexing schemes.
We report on the design, fabrication, and measurement of a low-temperature microwave switch architecture that can be fully integrated on chip using single Josephson junctions and superconducting bias lines. The basic switching element used is a reflective single-pole-single-throw switch that is realized by tuning the critical current of a single Josephson junction by way of a local flux bias. A single-pole-single-throw switch is demonstrated at 4.2 K to have anon/offratio in excess of 20 dB up to 12 GHz. This element is then incorporated into the design of a single-pole-double-throw switch that exhibits anon/offratio above 20 dB up to 10 GHz. The switches require no intrinsic power dissipation in either state, and their performance was verified for input powers of$-100to100 to100to-$60 dBm. S-parameter simulations using a simple lumped element model are in good agreement with the experimental data, allowing for the design to be extended to larger switch architectures.
We report the development of flux memory for use with superconducting circuits. This technology stores persistent currents in superconducting loops on-chip to be used to provide flux biasing for superconducting circuits, like qubits. We developed three types of flux memory and draw comparisons among them for circuit design. We demonstrate the utility of flux memory by using an in-situ flux detector and characterize each approach and further demonstrate that once flux is set in a memory cell, benchtop DC control sources can be powered off, leaving the on-chip flux bias in place. We propose that flux memory can be arranged in a two-dimensional configuration to multiplex control signals and reduce how line counts scale (N^2 devices -> 2N control lines), and our experimental results pave the path to the proposed scalability. We demonstrate the use of flux memory to flux bias a transmon qubit and show the tunability of the qubit state to a target frequency which remained stable on-chip for 20 hours.
Over the past few decades, superconducting circuits have been used to realize various novel electronic devices such as quantum bits, SQUIDs, parametric amplifiers, etc. One domain, however, where superconducting circuits fall short is information storage. Superconducting memories are based on the quantization of magnetic flux in superconducting loops. Standard implementations store information as magnetic flux quanta in a superconducting loop interrupted by two Josephson junctions (i.e., a SQUID). However, due to the large inductance required, the size of the SQUID loop cannot be scaled below several micrometers, resulting in low-density memory chips. Here, we propose a scalable memory consisting of a voltage-biased superconducting ring threaded by a half-quantum flux bias. By numerically solving the time-dependent Ginzburg-Landau equations, we show that applying a time-dependent bias voltage in the microwave range constitutes a writing mechanism to change the number of stored flux quanta within the ring. Since the proposed device does not require a large loop inductance, it can be scaled down, enabling a high-density memory technology.
Rapid single flux quantum (RSFQ) electronics is based on the Josephson junction as an active switching element. In standard RSFQ circuits its switching energy is much lower than the static power consumption caused by the resistive current distribution network. Due to this thermal heating of the chip, the maximum number of junctions on a single chip is limited to about 1 million. The frequency-dependent contribution to power dissipation from junction switchings is only about 2 percent of the static one. This fact limits the direct construction of VLSI systems for high-performance computing as well as small-scale circuit applications in the vicinity of ultra-sensitive detectors or even quantum circuits. We present an assessment of different approaches for reducing the static power consumption by investigating the potential of inductive bias distribution networks as well as reduced critical currents. We analyse the operation stability of simple digital circuits with 5 times smaller critical currents at 4.2 K. The combination of the reduced critical currents and inductive biasing can provide digital superconductive circuits with significantly reduced static power consumption.
Variable microwave-frequency couplers are highly useful components in classical communication systems and likely will play an important role in quantum communication applications. Conventional semiconductor-based microwave couplers have been used with superconducting quantum circuits, enabling, for example, the in situ measurements of multiple devices via a common readout chain. However, the semiconducting elements are lossy and furthermore dissipate energy when switched, making them unsuitable for cryogenic applications requiring rapid, repeated switching. Superconducting Josephson junction-based couplers can be designed for dissipation-free operation with fast switching and are easily integrated with superconducting quantum circuits. These enable on-chip, quantum-coherent routing of microwave photons, providing an appealing alternative to semiconductor switches. Here, we present and characterize a chip-based broadband microwave variable coupler, tunable over 4–8 GHz with over 1.5 GHz instantaneous bandwidth, based on the superconducting quantum interference device with two parallel Josephson junctions. The coupler is dissipation-free and features large on-off ratios in excess of 40 dB, and the coupling can be changed in about 10 ns. The simple design presented here can be readily integrated with superconducting qubit circuits and can be easily generalized to realize a four- or more port device.
Single-flux-quantum (SFQ) cryogenic control circuits are a promising approach for realizing scalable superconducting quantum processors. However, previous studies have primarily relied on conventional SFQ technologies with Josephson junction critical current densities ( JCJ_{\mathrm{C}}JC​ ) of about 1 kA/cm 2 and critical currents ( ICI_{\mathrm{C}}IC​ ) of several hundred microamperes. Such large critical currents can increase power dissipation and induce nonequilibrium quasiparticles that degrade qubit performance. In this study, we demonstrate coherent control of a flux-bias-free (FBF) flux qubit using a low-power SFQ driver monolithically integrated on the same chip. The SFQ driver was fabricated using epitaxial NbN/AlN/NbN Josephson junctions with critical currents of only a few microamperes, approximately two orders of magnitude smaller than those used in conventional SFQ circuits. Using this low- ICI_{\mathrm{C}}IC​ SFQ driver, we found that the energy relaxation time, T1T_{1}T1​ , of the FBF qubit remains comparable to that obtained under conventional microwave control, indicating that the low- ICI_{\mathrm{C}}IC​ SFQ driver does not introduce a measurable degradation of qubit performance in the present device.