A complete and deterministic Bell state measurement was realized by a simple linear optics experimental scheme which adopts two-photon polarization-momentum hyperentanglement. The scheme, which is based on the discrimination among the single photon Bell states of the hyperentangled state, requires the adoption of standard single photon detectors. The four polarization Bell states have been measured with average fidelity $F=0.889\ifmmode\pm\else\textpm\fi{}0.010$ by using the linear momentum degree of freedom as the ancilla. The feasibility of the scheme has been characterized as a function of the purity of momentum entanglement.
A linear optics-based scheme to implement various quantum information processing tasks is of paramount importance due to its ease of implementation and low noise. Many information-theoretic tasks depend on the successful discrimination of Bell states. A no-go theorem states that it is not possible to perfectly discriminate among the four Bell states when the measurement apparatus is restricted to linear optical elements. The success probability is only
50%. Using extra resources such as hyperentanglement, ancillary entanglement, and even a minimum amount of non-linearity, complete Bell-state discrimination can be achieved. The success probability for Bell-like state discrimination is only
25%. Bell-like states are non-maximally entangled two-qubit states that resemble Bell states in structure but have unequal Schmidt coefficients. We find that this can be boosted to
50% using hyperentanglement, where extra ancillary degrees of freedom (DOF) of photons, such as polarization, momentum, or OAM, are also entangled along with the system DOF. This contrasts with Bell-state discrimination, where
100% can be achieved. Furthermore, we find that using correlations in the photons' arrival times, all four Bell states can be distinguished with
100% success probability, while for Bell-like state discrimination, it increases only to
37.5% from
25%. We observe a similar contrast when using ancillary entangled photons. While the success probability for discriminating all four Bell states increases as
1−2N1, where
N is the number of ancillary photon pairs, for Bell-like states, it depends on the state parameters and can be less than
25% in some cases. Also, adding further ancillary photons decreases the success probability. We then show that using non-linear gadgets, namely SFG,
100% success probability can be achieved even for Bell-like state discrimination.
We show how hyperentanglement allows us to deterministically distinguish between all four polarization Bell states of two photons. In this proof-of-principle experiment, we employ the intrinsic time-energy correlation of photon pairs generated with high temporal definition in addition to the polarization entanglement obtained from parametric down-conversion. For the identification, no nonlinear optical elements or auxiliary photons are needed. The new possibilities this complete Bell measurement offers are demonstrated by realizing an optimal dense coding protocol.
Bell-state projections serve as a fundamental basis for most quantum communication and computing protocols today. However, with current Bell-state measurement schemes based on linear optics, only two of four Bell states can be identified, which means that the maximum success probability of this vital step cannot exceed 50%. Here, we experimentally demonstrate a scheme that amends the original measurement with additional modes in the form of ancillary photons, which leads to a more complex measurement pattern, and ultimately a higher success probability of 62.5%. Experimentally, we achieve a success probability of (57.9 ± 1.4)%, a substantial improvement over the conventional scheme. With the possibility of extending the protocol to a larger number of ancillary photons, our work paves the way toward more efficient realizations of quantum technologies based on Bell-state measurements.
Quantum logic coding efficiently enhances the noise immunity of quantum systems. A quantum logical qubit using multiple degrees of freedom (DOFs) of a photon is concise, and it can reduce resource consumption compared with a quantum logical qubit using multiple photons in one DOF. In this study, two logical Bell state measurement schemes are proposed for photon systems in momentum and polarization DOFs with linear optical elements, namely, momentum polarization logical Bell state measurement assisted by W-state and self-assisted momentum polarization logical Bell state measurement. In the first scheme, parity measurements on momentum and polarization DOFs are performed simultaneously using an auxiliary four-photon W-state. The even-parity logical Bell states can be distinguished by photon detector results, resulting in a success rate of 12.5%. The second scheme does not require an auxiliary entangled photon state, and the even-parity logical Bell states can be completely distinguished by simple linear optical elements and photon detector results with a success rate of 50%. These two linear optical momentum polarization logical Bell state measurement schemes are easier to implement experimentally than the nonlinear optical schemes, and their applications in quantum communication protocols are crucial.
A complete Bell-state measurement is not possible using only linear-optic elements, and most schemes achieve a success rate of no more than 50%, distinguishing, for example, two of the four Bell states but returning degenerate results for the other two. It is shown here that the introduction of a pair of ancillary entangled photons improves the success rate to 75%. More generally, the addition of ${2}^{N}\ensuremath{-}2$ ancillary photons yields a linear-optic Bell-state measurement with a success rate of $1\ensuremath{-}1/{2}^{N}$.