A complete Bell-state measurement is not possible using only linear-optic elements, and most schemes achieve a success rate of no more than 50%, distinguishing, for example, two of the four Bell states but returning degenerate results for the other two. It is shown here that the introduction of a pair of ancillary entangled photons improves the success rate to 75%. More generally, the addition of ${2}^{N}\ensuremath{-}2$ ancillary photons yields a linear-optic Bell-state measurement with a success rate of $1\ensuremath{-}1/{2}^{N}$.
Linear-optical realizations of Bell state measurement (BSM) on two single-photon qubits succeed with probability
ps no higher than 0.5. However, predetection quadrature squeezing, i.e., quantum noise limited phase sensitive amplification, in the usual linear-optical BSM circuit, can yield ${p}_{s}\ensuremath{\approx}0.643$. The ability to achieve
ps>0.5 has been found to be critical in resource-efficient realizations of linear-optical quantum computing and all-photonic quantum repeaters. Yet, the aforesaid value of
ps>0.5 is not known to be the maximum achievable using squeezing, thereby leaving it open whether close-to-
100 efficient BSM might be achievable using squeezing as a resource. In this paper, we report insights on why squeezing-enhanced BSM achieves
ps>0.5. Using this, we show that the previously reported ${p}_{s}\ensuremath{\approx}0.643$ at single-mode squeezing strength
r=0.6585---for unambiguous state discrimination (USD) of all four Bell states---is an experimentally unachievable point result, which drops to ${p}_{s}\ensuremath{\approx}0.59$ with the slightest change in
r. We, however, show that squeezing-induced boosting of
ps with USD operation is still possible over a continuous range of
r, with an experimentally achievable maximum occurring at
r=0.5774, achieving ${p}_{s}\ensuremath{\approx}0.596$. Finally, deviating from USD operation, we explore a trade space between
ps, the probability with which the BSM circuit declares a ``success,'' versus the probability of error
pe, the probability of an input Bell state being erroneously identified given the circuit declares a success. Since quantum error correction could correct for some
pe>0, this tradeoff may enable better quantum repeater designs by potentially increasing the entanglement generation rates with
ps exceeding what is possible with traditionally studied USD operation of BSMs.
Fault tolerance is essential for scalable quantum technologies and is enabled by quantum error-correction codes. Bell-state measurements (BSMs) are a fundamental building block for modern quantum technologies such as measurement-based quantum computation and fusion-based quantum computation, as well as quantum networks. Therefore, performing BSMs on error-corrected qubits is a necessary step for achieving fault tolerance in these applications. In this work, we realise a logical BSM using linear optics, based on a two-qubit repetition code, an instance of a quantum parity code that allows detection of bit-flip errors, and experimentally achieve a mean success probability of (70.8 +/- 0.4)%. While standard linear-optical BSMs are fundamentally limited to a maximum success probability of 50%, this increased success probability enables higher secure key rates in quantum communication and facilitates the generation of large graph states for quantum computation. Since fault-tolerant schemes require error-correction codes regardless, this improvement comes at no additional resource overhead. Our results demonstrate that error-correction codes can be used to surpass the linear-optics limit of BSMs, which is an important step towards practical, fault-tolerant, and scalable photonic quantum technologies.
Abstract Quantum teleportation has proven to be fundamental for many quantum information and communication processes. The core concept can be exploited in many tasks, from the transmission of quantum states, quantum repeaters, to quantum computing. However, for linear-optical systems, the efficiency of teleportation is directly linked to the success probability of the involved Bell-state measurement (BSM). In most implementations, this is realized by linear optics with an intrinsically limited success probability of 50%. Here, we demonstrate quantum teleportation surpassing this limit. We achieve an average fidelity of the teleported states of 0.8677 ± 0.0024, leading to an overall acceptance rate of the teleportation of 69.71 ± 0.75%. We obtain this boosted success probability by generating ancillary photonic states that are interfered with the Bell states. Thus, our work demonstrates the boosting BSMs in quantum-technology applications and our scheme could directly be applied to, e.g., quantum repeaters.
A linear optics-based scheme to implement various quantum information processing tasks is of paramount importance due to its ease of implementation and low noise. Many information-theoretic tasks depend on the successful discrimination of Bell states. A no-go theorem states that it is not possible to perfectly discriminate among the four Bell states when the measurement apparatus is restricted to linear optical elements. The success probability is only
50%. Using extra resources such as hyperentanglement, ancillary entanglement, and even a minimum amount of non-linearity, complete Bell-state discrimination can be achieved. The success probability for Bell-like state discrimination is only
25%. Bell-like states are non-maximally entangled two-qubit states that resemble Bell states in structure but have unequal Schmidt coefficients. We find that this can be boosted to
50% using hyperentanglement, where extra ancillary degrees of freedom (DOF) of photons, such as polarization, momentum, or OAM, are also entangled along with the system DOF. This contrasts with Bell-state discrimination, where
100% can be achieved. Furthermore, we find that using correlations in the photons' arrival times, all four Bell states can be distinguished with
100% success probability, while for Bell-like state discrimination, it increases only to
37.5% from
25%. We observe a similar contrast when using ancillary entangled photons. While the success probability for discriminating all four Bell states increases as
1−2N1, where
N is the number of ancillary photon pairs, for Bell-like states, it depends on the state parameters and can be less than
25% in some cases. Also, adding further ancillary photons decreases the success probability. We then show that using non-linear gadgets, namely SFG,
100% success probability can be achieved even for Bell-like state discrimination.
Abstract Fault-tolerant fusion-based photonic quantum computing (FBQC) greatly relies on entangling two-photon measurements, called fusions. These fusions can be realized using linear-optical projective Bell-state measurements (BSMs). These linear-optical BSMs are limited to a success probability of 50%, greatly reducing the performance of FBQC schemes. The performance of FBQC can be improved using boosting, thus achieving higher success probabilities by adding additional resources. Here, we realize a boosted BSM using a 4 × 4 multiport splitter and an additional entangled photon pair, allowing for a success probability of up to 75%. In our experiment, we obtain a success probability for our boosted BSM of (69.3 ± 0.3)%, clearly exceeding the 50% limit. We further demonstrate the significance of our boosted BSM for FBQC, showing a threefold increase in robustness to photon loss and a significant reduction of the logical error rates.