Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1112.0680 · Physical Review B

Noise properties of nanoscale YBa 2 Cu 3 O 7−δ Josephson junctions

David Gustafsson, Floriana Lombardi, Thilo Bauch

Published Nov 28, 2011• 14 citations
arXivHTMLPDF

Abstract

We present electric noise measurements of nanoscale biepitaxial YBa${}_{2}$Cu${}_{3}$O${}_{7\ensuremath{-}\ensuremath{\delta}}$ (YBCO) Josephson junctions fabricated by two different lithographic methods. The first (conventional) technique defines the junctions directly by ion milling etching through an amorphous carbon mask. The second (soft patterning) method makes use of the phase competition between the superconducting YBCO (Y123) and the insulating Y${}_{2}$BaCuO${}_{5}$ (Y211) phase at the grain boundary interface on MgO (110) substrates. The voltage noise properties of the two methods are compared in this study. For all junctions (having a thickness of 100 nm and widths of 250--500 nm), we see a significant amount of individual charge traps. We have extracted an approximate value for the effective area of the charge traps from the noise data. From the noise measurements, we infer that the soft-patterned junctions with a grain-boundary (GB) interface manifesting a large $c$-axis tunneling component have a uniform barrier and a superconductor-insulator-superconductor (SIS) -like behavior. The noise properties of soft-patterned junctions having a GB interface dominated by transport parallel to the $ab$ planes are in accordance with a resonant tunneling barrier model. The conventionally patterned junctions, instead, have suppressed superconducting transport channels with an area much less than the nominal junction area. These findings are important for the implementation of nanosized Josephson junctions in quantum circuits.

DOI
10.1103/physrevb.84.184526

Related papers

YBa 2 Cu 3 O 7 nano superconducting quantum interference devices on MgO bicrystal substrates

Jianxin Lin, Benedikt Müller, Julian Linek +5 more

We report on nanopatterned YBa2Cu3O7-δ (YBCO) direct current superconducting quantum interference devices (SQUIDs) based on grain boundary Josephson junctions. The nanoSQUIDs are fabricated by epitaxial growth of 120 nm-thick films of the high-transition temperature cuprate superconductor YBCO via pulsed laser deposition on MgO bicrystal substrates with 24° misorientation angle, followed by sputtering of dAu = 65 nm thick Au. Nanopatterning is performed by Ga focused ion beam (FIB) milling. The SQUID performance is comparable to devices on SrTiO3 (STO), as demonstrated by electric transport and noise measurements at 4.2 K. MgO has orders of magnitude smaller dielectric permittivity than STO; i.e., one may avoid Au as a resistively shunting layer to reduce the intrinsic thermal flux noise of the nanoSQUIDs. However, we find that the Au layer is important for avoiding degradation during FIB milling. Hence, we compare devices with different dAu produced by thinning the Au layer via Ar ion milling after FIB patterning. We find that the reduction of dAu yields an increase in junction resistance, however at the expense of a reduction of the critical current and increase in SQUID inductance. This results in an estimated thermal flux noise that is almost independent of dAu. However, for two devices on MgO with 65 nm-thick Au, we find an order of magnitude lower low-frequency excess noise as compared to nanoSQUIDs on STO or those on MgO with reduced dAu. For one of those devices we obtain with bias-reversal readout ultra-low flux noise of ∼175 nΦ0 Hz-1/2 down to ∼10 Hz.

Nanoscale•Jan 1, 2020•17 citations

Noise Properties of YBa 2 Cu 3 O 7-? Josephson Devices

J. Chen, Hiroyuki Nakamura, Takuya Yamashita

White noise properties of YBa2Cu3O7-δ (YBCO) grain boundary Josephson devices have been studied. Bias voltage (V) dependence of the white voltage noise spectral density (SV) were measured in detail for YBCO dc-SQUIDS and single Josephson junctions on different kinds of substrates with various misorientation angles. It was found that Sv was in good agreement with the thermal noise theory hypothesizing that the device noise was only due to Johnson noise. This implies that the quantum noise can be achieved with optimized YBCO dc-SQUIDS. We have designed a YBCO dc-SQUID with a cross section of junctions as small as 0.1 μm^2. It was predicted that the minimum intrinsic white energy resolution (E””'‘) should be about Planck's constant (h) at 4.2 K. The actual minimum eW, value of 1.76 x 10^-33 J/Hz = 2.7 h was obtained. This result demonstrates that E” '”of YBCO dc-SQUID s can be minimized to the order of h.

Chinese Journal of Physics•Apr 1, 1996•0 citations

Multilayer superconducting devices made using biepitaxial grain boundary Josephson junctions in YBa 2 Cu 3 O 7

K. Char, M. S. Colclough, Luke P. S. Lee +1 more

We will report advances in superconducting devices and circuits made usingbi-epitaxial grain boundary Josephson junctions in YBa2Cu3O7. These bi-epitaxial grainboundary junctions are created at predetermined locations by controlling the in-planeepitaxy of YBa2Cu3O7 with a seed layer and a buffer layer on a base layer. SQUIDs madefrom these junctions show modulation up to 88 K and their white noise level is at the

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 1, 1992•0 citations

Resolving the effects of frequency-dependent damping and quantum phase diffusion in YBa 2 Cu 3 O 7−x Josephson junctions

D. Stornaiuolo, G. Rotoli, D. Massarotti +4 more

We report on the study of the phase dynamics of high-critical-temperature superconductor Josephson junctions. We realized YBa${}_{2}$Cu${}_{3}$O${}_{7\ensuremath{-}x}$ grain boundary biepitaxial junctions in the submicron scale using low-loss substrates and analyzed their dissipation by comparing the transport measurements with Monte Carlo simulations. The behavior of the junctions can be fitted using a model based on two quality factors, which results in a frequency-dependent damping. Moreover, our devices can be designed to have Josephson energy of the order of the Coulomb energy. In this unusual energy range, phase delocalization strongly influences the device's dynamics, promoting the transition to a quantum phase diffusion regime. We study the signatures of such a transition by combining the outcomes of Monte Carlo simulations with the analysis of the device's parameters, the critical current, and the temperature behavior of the low-voltage resistance ${R}_{0}$.

arXiv:1307.0106•Physical Review B•Apr 25, 2013•33 citations

Transport and Noise Properties of sub-100-nm Planar Nb Josephson Junctions with Metallic Hf - Ti Barriers for nano-SQUID Applications

Viacheslav Morosh, Julian Linek, B. Müller +9 more

We analyze electric transport and noise properties at 4.2 K of self-shunted superconductor-normal metal-superconductor (SNS) sandwich-type Josephson junctions, comprising $\mathrm{Nb}$ as the superconductor and $\mathrm{Hf}$-$\mathrm{Ti}$ as the normal conducting material, with lateral dimensions down to approximately $80$ nm. The junctions are fabricated with an optimized multilayer $\mathrm{Nb}$ technology based on nanopatterning by electron-beam lithography and chemical-mechanical polishing. The dependence of transport properties on the junction geometry (lateral size and barrier thickness ${d}_{\mathrm{Hf}\mathrm{\ensuremath{-}}\mathrm{Ti}}$) is studied, yielding a characteristic voltage ${V}_{c}$ up to approximately $100\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}$ for the smallest ${d}_{\mathrm{Hf}\mathrm{\ensuremath{-}}\mathrm{Ti}}=17$ nm. The observed small hysteresis in the current-voltage curves of devices with high ${V}_{c}$ and large size can be attributed to self-heating of the junctions and fitted with an extended version of the resistively shunted junction model. Measurements of voltage noise of single junctions are consistent with the model including self-heating effects. The potential of our technology for further miniaturization of nanoscale superconducting quantum interference devices and for the improvement of their performance is discussed.

Physical Review Applied•Nov 30, 2020•11 citations

Submicron YBa2Cu3O7−δ grain boundary junction dc SQUIDs

M. Kawasaki, P. K. Chaudhari, T. H. Newman +1 more

We have fabricated and measured the properties of micron-size single grain boundary junctions and dc superconducting quantum interference devices (SQUIDs). The width of the junctions was varied between 0.25 and 2 μm. The junctions were formed in c-axis oriented epitaxial films with a single 24° tilt boundary. They were fabricated using electron beam lithography and ion milling. All of the junctions operate at 77 K. The noise properties of SQUIDs made of these junctions have been characterized. They show a significant 1/f component which is comparable to published values. However, the white noise level, 3×10−31 J/Hz measured at 77 K, is the lowest ever reported.

Applied Physics Letters•Jun 3, 1991•59 citations
We present electric noise measurements of nanoscale biepitaxial YBa2{}_{2}2​Cu3{}_{3}3​O7\ensuremath−\ensuremathδ{}_{7\ensuremath{-}\ensuremath{\delta}}7\ensuremath−\ensuremathδ​ (YBCO) Josephson junctions fabricated by two different lithographic methods. The first (conventional) technique defines the junctions directly by ion milling etching through an amorphous carbon mask. The second (soft patterning) method makes use of the phase competition between the superconducting YBCO (Y123) and the insulating Y2{}_{2}2​BaCuO5{}_{5}5​ (Y211) phase at the grain boundary interface on MgO (110) substrates. The voltage noise properties of the two methods are compared in this study. For all junctions (having a thickness of 100 nm and widths of 250--500 nm), we see a significant amount of individual charge traps. We have extracted an approximate value for the effective area of the charge traps from the noise data. From the noise measurements, we infer that the soft-patterned junctions with a grain-boundary (GB) interface manifesting a large ccc-axis tunneling component have a uniform barrier and a superconductor-insulator-superconductor (SIS) -like behavior. The noise properties of soft-patterned junctions having a GB interface dominated by transport parallel to the ababab planes are in accordance with a resonant tunneling barrier model. The conventionally patterned junctions, instead, have suppressed superconducting transport channels with an area much less than the nominal junction area. These findings are important for the implementation of nanosized Josephson junctions in quantum circuits.
We report on nanopatterned YBa2Cu3O7-δ (YBCO) direct current superconducting quantum interference devices (SQUIDs) based on grain boundary Josephson junctions. The nanoSQUIDs are fabricated by epitaxial growth of 120 nm-thick films of the high-transition temperature cuprate superconductor YBCO via pulsed laser deposition on MgO bicrystal substrates with 24° misorientation angle, followed by sputtering of dAu = 65 nm thick Au. Nanopatterning is performed by Ga focused ion beam (FIB) milling. The SQUID performance is comparable to devices on SrTiO3 (STO), as demonstrated by electric transport and noise measurements at 4.2 K. MgO has orders of magnitude smaller dielectric permittivity than STO; i.e., one may avoid Au as a resistively shunting layer to reduce the intrinsic thermal flux noise of the nanoSQUIDs. However, we find that the Au layer is important for avoiding degradation during FIB milling. Hence, we compare devices with different dAu produced by thinning the Au layer via Ar ion milling after FIB patterning. We find that the reduction of dAu yields an increase in junction resistance, however at the expense of a reduction of the critical current and increase in SQUID inductance. This results in an estimated thermal flux noise that is almost independent of dAu. However, for two devices on MgO with 65 nm-thick Au, we find an order of magnitude lower low-frequency excess noise as compared to nanoSQUIDs on STO or those on MgO with reduced dAu. For one of those devices we obtain with bias-reversal readout ultra-low flux noise of ∼175 nΦ0 Hz-1/2 down to ∼10 Hz.
White noise properties of YBa2Cu3O7-δ (YBCO) grain boundary Josephson devices have been studied. Bias voltage (V) dependence of the white voltage noise spectral density (SV) were measured in detail for YBCO dc-SQUIDS and single Josephson junctions on different kinds of substrates with various misorientation angles. It was found that Sv was in good agreement with the thermal noise theory hypothesizing that the device noise was only due to Johnson noise. This implies that the quantum noise can be achieved with optimized YBCO dc-SQUIDS. We have designed a YBCO dc-SQUID with a cross section of junctions as small as 0.1 μm^2. It was predicted that the minimum intrinsic white energy resolution (E””'‘) should be about Planck's constant (h) at 4.2 K. The actual minimum eW, value of 1.76 x 10^-33 J/Hz = 2.7 h was obtained. This result demonstrates that E” '”of YBCO dc-SQUID s can be minimized to the order of h.
We report on the study of the phase dynamics of high-critical-temperature superconductor Josephson junctions. We realized YBa2{}_{2}2​Cu3{}_{3}3​O${}_{7\ensuremath{-}x}$ grain boundary biepitaxial junctions in the submicron scale using low-loss substrates and analyzed their dissipation by comparing the transport measurements with Monte Carlo simulations. The behavior of the junctions can be fitted using a model based on two quality factors, which results in a frequency-dependent damping. Moreover, our devices can be designed to have Josephson energy of the order of the Coulomb energy. In this unusual energy range, phase delocalization strongly influences the device's dynamics, promoting the transition to a quantum phase diffusion regime. We study the signatures of such a transition by combining the outcomes of Monte Carlo simulations with the analysis of the device's parameters, the critical current, and the temperature behavior of the low-voltage resistance R0{R}_{0}R0​.
We analyze electric transport and noise properties at 4.2 K of self-shunted superconductor-normal metal-superconductor (SNS) sandwich-type Josephson junctions, comprising Nb\mathrm{Nb}Nb as the superconductor and Hf\mathrm{Hf}Hf-Ti\mathrm{Ti}Ti as the normal conducting material, with lateral dimensions down to approximately 808080 nm. The junctions are fabricated with an optimized multilayer Nb\mathrm{Nb}Nb technology based on nanopatterning by electron-beam lithography and chemical-mechanical polishing. The dependence of transport properties on the junction geometry (lateral size and barrier thickness ${d}_{\mathrm{Hf}\mathrm{\ensuremath{-}}\mathrm{Ti}}$) is studied, yielding a characteristic voltage Vc{V}_{c}Vc​ up to approximately $100\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}$ for the smallest ${d}_{\mathrm{Hf}\mathrm{\ensuremath{-}}\mathrm{Ti}}=17$ nm. The observed small hysteresis in the current-voltage curves of devices with high Vc{V}_{c}Vc​ and large size can be attributed to self-heating of the junctions and fitted with an extended version of the resistively shunted junction model. Measurements of voltage noise of single junctions are consistent with the model including self-heating effects. The potential of our technology for further miniaturization of nanoscale superconducting quantum interference devices and for the improvement of their performance is discussed.
We have fabricated and measured the properties of micron-size single grain boundary junctions and dc superconducting quantum interference devices (SQUIDs). The width of the junctions was varied between 0.25 and 2 μm. The junctions were formed in c-axis oriented epitaxial films with a single 24° tilt boundary. They were fabricated using electron beam lithography and ion milling. All of the junctions operate at 77 K. The noise properties of SQUIDs made of these junctions have been characterized. They show a significant 1/f component which is comparable to published values. However, the white noise level, 3×10−31 J/Hz measured at 77 K, is the lowest ever reported.