Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Multilayer superconducting devices made using biepitaxial grain boundary Josephson junctions in YBa 2 Cu 3 O 7

K. Char, M. S. Colclough, Luke P. S. Lee, Greg Zaharchuk

Published Mar 1, 1992• 0 citations
Publisher

Abstract

We will report advances in superconducting devices and circuits made usingbi-epitaxial grain boundary Josephson junctions in YBa2Cu3O7. These bi-epitaxial grainboundary junctions are created at predetermined locations by controlling the in-planeepitaxy of YBa2Cu3O7 with a seed layer and a buffer layer on a base layer. SQUIDs madefrom these junctions show modulation up to 88 K and their white noise level is at the

DOI
10.1117/12.56687

Related papers

Feasibility of biepitaxial YBa2Cu3O7−x Josephson junctions for fundamental studies and potential circuit implementation

Francesco Tafuri, Franco Carillo, Floriana Lombardi +7 more

We present various concepts and experimental procedures to produce biepitaxial ${\mathrm{YBa}}_{2}{\mathrm{Cu}}_{3}{\mathrm{O}}_{7\ensuremath{-}x}$ grain-boundary Josephson junctions. The device properties have an interesting phenomenology, related in part to the possible influence of $\mathrm{``}\ensuremath{\pi}$ loops.'' The performance of our junctions and superconducting quantum interference devices indicates significant improvement in the biepitaxial technique. Further, we propose methods for fabricating circuits in which 0 and $\ensuremath{\pi}$ loops are controllably located on the same chip.

arXiv:cond-mat/0010128•Physical review. B, Condensed matter•Dec 1, 2000•24 citations

Submicron YBa2Cu3O7−δ grain boundary junction dc SQUIDs

M. Kawasaki, P. K. Chaudhari, T. H. Newman +1 more

We have fabricated and measured the properties of micron-size single grain boundary junctions and dc superconducting quantum interference devices (SQUIDs). The width of the junctions was varied between 0.25 and 2 μm. The junctions were formed in c-axis oriented epitaxial films with a single 24° tilt boundary. They were fabricated using electron beam lithography and ion milling. All of the junctions operate at 77 K. The noise properties of SQUIDs made of these junctions have been characterized. They show a significant 1/f component which is comparable to published values. However, the white noise level, 3×10−31 J/Hz measured at 77 K, is the lowest ever reported.

Applied Physics Letters•Jun 3, 1991•59 citations

Noise properties of nanoscale YBa 2 Cu 3 O 7−δ Josephson junctions

David Gustafsson, Floriana Lombardi, Thilo Bauch

We present electric noise measurements of nanoscale biepitaxial YBa${}_{2}$Cu${}_{3}$O${}_{7\ensuremath{-}\ensuremath{\delta}}$ (YBCO) Josephson junctions fabricated by two different lithographic methods. The first (conventional) technique defines the junctions directly by ion milling etching through an amorphous carbon mask. The second (soft patterning) method makes use of the phase competition between the superconducting YBCO (Y123) and the insulating Y${}_{2}$BaCuO${}_{5}$ (Y211) phase at the grain boundary interface on MgO (110) substrates. The voltage noise properties of the two methods are compared in this study. For all junctions (having a thickness of 100 nm and widths of 250--500 nm), we see a significant amount of individual charge traps. We have extracted an approximate value for the effective area of the charge traps from the noise data. From the noise measurements, we infer that the soft-patterned junctions with a grain-boundary (GB) interface manifesting a large $c$-axis tunneling component have a uniform barrier and a superconductor-insulator-superconductor (SIS) -like behavior. The noise properties of soft-patterned junctions having a GB interface dominated by transport parallel to the $ab$ planes are in accordance with a resonant tunneling barrier model. The conventionally patterned junctions, instead, have suppressed superconducting transport channels with an area much less than the nominal junction area. These findings are important for the implementation of nanosized Josephson junctions in quantum circuits.

arXiv:1112.0680•Physical Review B•Nov 28, 2011•14 citations

Intrinsic and extrinsicd-wave effects in YBa2Cu3O7−δ grain boundary Josephson junctions: Implications for π circuitry

Francesco Tafuri, John R. Kirtley, Floriana Lombardi +1 more

We have investigated the properties of biepitaxial ${\mathrm{YBa}}_{2}{\mathrm{Cu}}_{3}{\mathrm{O}}_{7\ensuremath{-}\ensuremath{\delta}}$ grain boundary Josephson junctions, which appear to be characterized by low barrier transmission probabilities. Extrinsic and intrinsic d-wave effects are discussed within the framework of novel designs for $\ensuremath{\pi}$-circuitry and qubits. The absence of spontaneous magnetization and of the consequent additional noise, in a wide range of experimental conditions, seems to be encouraging for designs of ``quiet'' devices.

Physical review. B, Condensed matter•May 21, 2003•12 citations

Noise Properties of YBa 2 Cu 3 O 7-? Josephson Devices

J. Chen, Hiroyuki Nakamura, Takuya Yamashita

White noise properties of YBa2Cu3O7-δ (YBCO) grain boundary Josephson devices have been studied. Bias voltage (V) dependence of the white voltage noise spectral density (SV) were measured in detail for YBCO dc-SQUIDS and single Josephson junctions on different kinds of substrates with various misorientation angles. It was found that Sv was in good agreement with the thermal noise theory hypothesizing that the device noise was only due to Johnson noise. This implies that the quantum noise can be achieved with optimized YBCO dc-SQUIDS. We have designed a YBCO dc-SQUID with a cross section of junctions as small as 0.1 μm^2. It was predicted that the minimum intrinsic white energy resolution (E””'‘) should be about Planck's constant (h) at 4.2 K. The actual minimum eW, value of 1.76 x 10^-33 J/Hz = 2.7 h was obtained. This result demonstrates that E” '”of YBCO dc-SQUID s can be minimized to the order of h.

Chinese Journal of Physics•Apr 1, 1996•0 citations

NanoSQUIDs from YBa 2 Cu 3 O 7 /SrTiO 3 superlattices with bicrystal grain boundary Josephson junctions

Jianxin Lin, Julian Linek, R. Kleiner +1 more

We report on the fabrication and characterization of nanopatterned dc SQUIDs with grain boundary Josephson junctions based on heteroepitaxially grown YBa 2 Cu 3 O 7 /SiTrO 3 superlattices.

arXiv:2007.11046•Nanoscale•Jan 1, 2020•7 citations
We will report advances in superconducting devices and circuits made usingbi-epitaxial grain boundary Josephson junctions in YBa2Cu3O7. These bi-epitaxial grainboundary junctions are created at predetermined locations by controlling the in-planeepitaxy of YBa2Cu3O7 with a seed layer and a buffer layer on a base layer. SQUIDs madefrom these junctions show modulation up to 88 K and their white noise level is at the
We present various concepts and experimental procedures to produce biepitaxial ${\mathrm{YBa}}_{2}{\mathrm{Cu}}_{3}{\mathrm{O}}_{7\ensuremath{-}x}$ grain-boundary Josephson junctions. The device properties have an interesting phenomenology, related in part to the possible influence of $\mathrm{``}\ensuremath{\pi}$ loops.'' The performance of our junctions and superconducting quantum interference devices indicates significant improvement in the biepitaxial technique. Further, we propose methods for fabricating circuits in which 0 and $\ensuremath{\pi}$ loops are controllably located on the same chip.
We have fabricated and measured the properties of micron-size single grain boundary junctions and dc superconducting quantum interference devices (SQUIDs). The width of the junctions was varied between 0.25 and 2 μm. The junctions were formed in c-axis oriented epitaxial films with a single 24° tilt boundary. They were fabricated using electron beam lithography and ion milling. All of the junctions operate at 77 K. The noise properties of SQUIDs made of these junctions have been characterized. They show a significant 1/f component which is comparable to published values. However, the white noise level, 3×10−31 J/Hz measured at 77 K, is the lowest ever reported.
We present electric noise measurements of nanoscale biepitaxial YBa2{}_{2}2​Cu3{}_{3}3​O${}_{7\ensuremath{-}\ensuremath{\delta}}$ (YBCO) Josephson junctions fabricated by two different lithographic methods. The first (conventional) technique defines the junctions directly by ion milling etching through an amorphous carbon mask. The second (soft patterning) method makes use of the phase competition between the superconducting YBCO (Y123) and the insulating Y2{}_{2}2​BaCuO5{}_{5}5​ (Y211) phase at the grain boundary interface on MgO (110) substrates. The voltage noise properties of the two methods are compared in this study. For all junctions (having a thickness of 100 nm and widths of 250--500 nm), we see a significant amount of individual charge traps. We have extracted an approximate value for the effective area of the charge traps from the noise data. From the noise measurements, we infer that the soft-patterned junctions with a grain-boundary (GB) interface manifesting a large ccc-axis tunneling component have a uniform barrier and a superconductor-insulator-superconductor (SIS) -like behavior. The noise properties of soft-patterned junctions having a GB interface dominated by transport parallel to the ababab planes are in accordance with a resonant tunneling barrier model. The conventionally patterned junctions, instead, have suppressed superconducting transport channels with an area much less than the nominal junction area. These findings are important for the implementation of nanosized Josephson junctions in quantum circuits.
We have investigated the properties of biepitaxial ${\mathrm{YBa}}_{2}{\mathrm{Cu}}_{3}{\mathrm{O}}_{7\ensuremath{-}\ensuremath{\delta}}$ grain boundary Josephson junctions, which appear to be characterized by low barrier transmission probabilities. Extrinsic and intrinsic d-wave effects are discussed within the framework of novel designs for $\ensuremath{\pi}$-circuitry and qubits. The absence of spontaneous magnetization and of the consequent additional noise, in a wide range of experimental conditions, seems to be encouraging for designs of ``quiet'' devices.
White noise properties of YBa2Cu3O7-δ (YBCO) grain boundary Josephson devices have been studied. Bias voltage (V) dependence of the white voltage noise spectral density (SV) were measured in detail for YBCO dc-SQUIDS and single Josephson junctions on different kinds of substrates with various misorientation angles. It was found that Sv was in good agreement with the thermal noise theory hypothesizing that the device noise was only due to Johnson noise. This implies that the quantum noise can be achieved with optimized YBCO dc-SQUIDS. We have designed a YBCO dc-SQUID with a cross section of junctions as small as 0.1 μm^2. It was predicted that the minimum intrinsic white energy resolution (E””'‘) should be about Planck's constant (h) at 4.2 K. The actual minimum eW, value of 1.76 x 10^-33 J/Hz = 2.7 h was obtained. This result demonstrates that E” '”of YBCO dc-SQUID s can be minimized to the order of h.